1964 Chevrolet Chevelle Bodies and Fender Parts

Essential 1964 Chevrolet Chevelle Bodies and Fender Parts

KAI – Dash Panel Patch (Part No.GMK403052164)

Dash Panel Patch

from

$79.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:
  • 57 Inch X 2 Inch Between Dash And Windshield
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Brace (Part No.GMK403012064)

Fender Brace

from

$6.99
New Goodmark Driver Or Passenger Side Front Fender Brace Front, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.GMK403046064L)

Rocker Panel

from

$99.99
New Goodmark Rocker Panel Driver Side Inner

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Liftgate Seal (Part No.GMK403071464S)

Liftgate Seal

from

$79.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino

Product Features:
  • 2 Piece Except Wagon/El Camino
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$129.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403250068R)

Floor Pan

from

$399.99
New Goodmark Cab Floor, Passenger Side, Full Length, 30 Inch X 62 Inch, EDP-Coated

Product Features:
  • Passenger Side Full Length 30 Inch X 62 Inch EDP-Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK403369070L)

Quarter Panel

from

$64.99
New Goodmark Driver Side Lower Rear Quarter Panel Patch, 13In High X 32In Long

Product Features:
  • 13In High X 32In Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)

A-Pillar Trim Plug

from

$16.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set

Product Features:
  • 12 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK403019064L)

Body Patch Panel

from

$79.99
New Goodmark Driver Side Fender Rear Lower Patch Panel, 11 Inches High X 13 1/2 Inches Long

Product Features:
  • 11 Inches High X 13 1/2 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK403219068L)

Body Patch Panel

from

$79.99
New Goodmark Driver Side Fender Rear Lower Patch Panel, 10 3/4H X 14L, Made Of Steel

Product Features:
  • 10 3/4 Inches High X 14 Inches Long Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064R)

Floor Pan Toe Board

from

$99.99
New Goodmark Passenger Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403237068R)

Floor Pan Toe Board

from

$119.99
New Goodmark Floor Pan T Board, Passenger Side, 30 X 16, With Floor To Firewall Extension, Includes Part Of Transmission Hump

Product Features:
  • Passenger Side 30 X 16 With Floor To Firewall Extension Includes Part Of Transmission Hump
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Spare Tire Stop (Part No.GMK4010726621)

Spare Tire Stop

from

$7.99
New Goodmark Spare Tire Hold Down Bracket

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Emblem (Part No.GMK4010130653)

Fender Emblem

from

$21.99
New Goodmark Fender Emblem, 327, Made Of Steel

Product Features:
  • 327 Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Emblem (Part No.GMK4032130692P)

Fender Emblem

from

$69.99
New Goodmark Fender Emblem, SS, 2 Required

Product Features:
  • SS 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Energy Suspension – Body Mount Set (Part No.3.4128R)

Body Mount Set

from

$149.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Body Mount Set (Part No.3.4115R)

Body Mount Set

from

$117.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

KAI – Floor Plug (Part No.GMK4030512641A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug With Notch

Product Features:
  • With Notch
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Plug (Part No.GMK403051264A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Molding Clip (Part No.GMK4031711662)

Rocker Molding Clip

from

$7.99
New Goodmark Pinchweld Moulding Clip, 12 Required

Product Features:
  • 12 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Molding Clip (Part No.GMK4030711642)

Rocker Molding Clip

from

$7.99
New Goodmark Pinchweld Moulding Clip, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Body Panel (Part No.GMK403285068)

Rear Body Panel

from

$339.99
New Goodmark Tail Panel, Excludes Wagon/El Camino

Product Features:
  • Excludes Wagon/El Camino
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Body Panel (Part No.GMK403185067)

Rear Body Panel

from

$289.99
New Goodmark Tail Panel, Excludes Wagon/El Camino

Product Features:
  • Excludes Wagon/El Camino
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hardtop Moulding (Part No.RR 5019-T)

Hardtop Moulding

from

$131.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Rear Roof Rail Seals. Fits 4-door station wagon. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hardtop Moulding (Part No.RR 5002)

Hardtop Moulding

from

$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Windshield Seal (Part No.BT 1)

Windshield Seal

from

$27.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16 In. wide X 15 Ft. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Pillar Post Seal (Part No.CZ 8104)

Door Pillar Post Seal

from

$73.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Sponge reproduction with a jet black, smooth skin. Each. piece is 23-3/16 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Convertible Top Seal (Part No.RR 1609)

Convertible Top Seal

from

$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Rail Kit. 7-Piece set includes all right and left side top rail seals and windshield top header seal (HD 729).

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

1964 Chevrolet Chevelle Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet Chevelle. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 26 different Bodies and Fender Parts in our inventory ranging from $4.99 to $199.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet Chevelle running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet Chevelle. KAI, Energy Suspension, and Metro Mould are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1964 Chevrolet Chevelle, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1964 Chevrolet Chevelle rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1964 Chevrolet Chevelle Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet Chevelle demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Chevelle the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

FAQs for 1964 Chevrolet Chevelle Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1964 Chevrolet Chevelle?

Out of 26 Bodies and Fender Parts for the 1964 Chevrolet Chevelle, the most popular in our inventory are:
Fender Emblem
from $29.99
This product is not rated
Fender Emblem
Fender Emblems
A-Pillar Trim Plug
from $16.99
This product is not rated
A-Pillar Trim Plug
Body A-Pillar Trim Panel Plugs
Deck Lid Seal
from $27.99
This product is not rated
Deck Lid Seal
Hatch Seals