1964 Cadillac Series 60 Fleetwood Suspension Parts
More 1964 Cadillac Series 60 Fleetwood Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1964 Cadillac Series 60 Fleetwood, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1964 Cadillac Series 60 Fleetwood Suspension Parts
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Rare Parts – Control Arm Shaft Kit (Part No.RP15577)
from
$261.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat Treated thread and bushing
- Torsional rubber bushings
- Precision thread tolerances
- Greaseable
Rare Parts – Control Arm Shaft Kit (Part No.RP15343)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
MOOG – Control Arm Bushing (Part No.K5155)
from
$34.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
MOOG – Suspension Control Arm Bushing Kit (Part No.K5187)
from
$30.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Manufactured from high quality elastomer compounds for durability and ride performance
- Elastomer compounds do not utilize any reground rubber fillers
- High level bonding adhesive is used for durability
Rare Parts – Control Arm Bushing (Part No.RP15172)
from
$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
MOOG – Control Arm Bushing Kit (Part No.K426)
from
$52.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5803)
from
$46.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic LT Shock Absorber (Part No.59347)
from
$27.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55803)
from
$37.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Matic LT Shock Absorber (Part No.59324)
from
$37.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Metro Mould – Shock Absorber Bushing (Part No.BN 11)
from
$12.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Shock Absorber Grommet. 1 In. bottom O.D. 3/4 In. high, with 5/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Popular 1964 Cadillac Series 60 Fleetwood Suspension Parts Categories
1964 Cadillac Series 60 Fleetwood Suspension Parts
You count on your 1964 Cadillac Series 60 Fleetwood to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 12 Suspension Parts ranging in price from $11.99 to $52.99, you’re sure to find everything you need for your 1964 Cadillac Series 60 Fleetwood.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 5 different brands like Valvoline, Monroe, and Metro Mould. 1964 Cadillac Series 60 Fleetwood Suspension Parts start as low as $11.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 1964 Cadillac Series 60 Fleetwood Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1964 Cadillac Series 60 Fleetwood below to get started!
Top-Rated Suspension Parts Brands For Your 1964 Cadillac Series 60 Fleetwood
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Cadillac Series 60 Fleetwood running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Metro Mould, and even more.
Popular Valvoline Suspension Parts
You’ll find popular Valvoline brand products across Air Suspension and Kits. All are waiting to get your 1964 Cadillac Series 60 Fleetwood back on the road. Some of the top-rated Valvoline products in these categories are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1964 Cadillac Series 60 Fleetwood, and some of our most reviewed Monroe parts include:
FAQs for 1964 Cadillac Series 60 Fleetwood Suspension Parts
What are the most purchased Suspension Parts for the 1964 Cadillac Series 60 Fleetwood?
Out of 12 Suspension Parts for the 1964 Cadillac Series 60 Fleetwood, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
