1963 Toyopet Crown Belts and Hoses
Find Your Specific 1963 Toyopet Crown Belts and Hoses
Below you will find various in-demand Toyopet Belts and Hoses, components and accessories for your 1963 Crown. Advance Auto Parts has popular Crown parts like Engine Cooling Hoses, Serpentine and V Belts, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Crown model years including
1961
1962 and more. Select a category of 1963 Toyopet Crown Belts and Hoses below and start saving instantly.
Popular 1963 Toyopet Crown Belts and Hoses Categories
Essential Belts and Hoses for 1963 Toyopet Crowns
Gates – Automotive XL High Capacity V-Belt (Part No.9360)
from
$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
Gates – Premium Molded Coolant Hose (Part No.21942)
from
$19.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Upgrade your 1963 Toyopet Crown with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1963 Toyopet Crown, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyopet or enhancing its overall performance, Belts and Hoses are key to keeping your Crown functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Belts and Hoses for the 1963 Toyopet Crown, designed to meet your needs without breaking the bank.
From
Engine Cooling Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1963 Toyopet Crown at great prices.
Our Belts and Hoses inventory for this model
ranges from just $9.79 to $26.49, with
an average price of $18.76.
Our 3 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1963 Toyopet Crown without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters
and more to make sure your 1963 Toyopet Crown is always ready to roll. We’re committed to providing you with everything you need to keep your Crown in top shape, all in one place.
Start shopping confidently below for your 1963 Toyopet Crown!
Best-Selling Engine Cooling Hoses for 1963 Toyopet Crowns
Enhance the driving experience in your Toyopet with 1 quality Engine Cooling Hose components, starting at $19.99.
Gates – Premium Molded Coolant Hose (Part No.21942)
from
$19.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Popular 1963 Toyopet Crown Serpentine and V Belts
Customize your Toyopet with 1 Serpentine and V Belts products
like V-Belts, all
priced under $26.49.
Gates – Automotive XL High Capacity V-Belt (Part No.9360)
from
$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
Top Picks for 1963 Toyopet Crown Heater Hoses
Upgrade Toyopet Crowns with top-quality Heater Hoses parts, including 1 OEM and aftermarket selections for your 1963 model.
Gates – Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
FAQs for 1963 Toyopet Crown Belts and Hoses
Which Belts and Hoses are best-sellers for 1963 Toyopet Crowns?
Out of 3 Belts and Hoses that fit 1963 Toyopet Crowns, the following parts are the top sellers:
- Premium Molded Coolant Hose (10511393) – $9.79
- Automotive XL High Capacity V-Belt (11520338) – $26.49
- Premium Molded Coolant Hose (10512140) – $19.99
What’s the price range for 1963 Toyopet Crown Belts and Hoses?
Belts and Hose prices for the 1963 Toyopet Crown start at $9.79 and go up to $26.49 for the most premium parts.
What’s the average price of a Belts and Hose for a 1963 Toyopet Crown?
The average price for Belts and Hoses for the 1963 Toyopet Crown is $18.76. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Toyopet Crown model years?
What are the cheapest Belts and Hoses for my 1963 Toyopet Crown?
The cheapest 1963 Toyopet Crown Belts and Hoses we carry in stock are:
- Premium Molded Coolant Hose (10511393) – $9.79
- Premium Molded Coolant Hose (10512140) – $19.99
- Automotive XL High Capacity V-Belt (11520338) – $26.49
What types of Belts and Hoses do you sell for my 1963 Toyopet Crown?
As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1963 Toyopet Crown:
Can I get help with 1963 Toyopet Crown Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyopet Belts and Hoses and more.
What is your return policy for Toyopet Crown Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Toyopet Crown Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
