Toyopet Crown Parts

Please Select your Vehicle to See Exact Fit Parts

Toyopet Crown Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.21942)

Premium Molded Coolant Hose

from

$19.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • The specially designed materials resist collapse under vacuum.
  • Designed to resist electrochemical degradation, the main cause of casing failure
  • Pre-shaped to fit and ensure a perfect seal
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Automotive XL High Capacity V-Belt (Part No.9360)

Automotive XL High Capacity V-Belt

from

$35.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
  • The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
  • Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
  • It resists oil, heat, ozone, weather, and decay to improve belt life.
  • Meets or exceeds SAE J636C specifications
See More
View Product

Gates – ThermalPro Premium Molded Coolant Hose (Part No.20338)

ThermalPro Premium Molded Coolant Hose

from

$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Materials specifically designed to resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Toyopet Crown Air Intakes

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny (Part No.0-4412BKX)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny

from

$819.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:
  • All Aluminum Construction
  • No Choke Tower For Unobstructed Airflow
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Down-Leg Boosters For Improved Fuel Signal
  • Contoured Hex Head Squirter Screw For Streamlined Airflow
  • Internal Pump Passage On Metering Block w/Tunable Bleed Off
  • Built In Drain Plug Provides Easy Access to Empty Bowl
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust
See More
View Product

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)

Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny

from

$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.

Product Features:
  • Vibratory Polished For Good Looks
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
See More
View Product

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412HBX)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet

from

$921.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:
  • All Aluminum Construction
  • No Choke Tower For Unobstructed Airflow
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Down-Leg Boosters For Improved Fuel Signal
  • Contoured Hex Head Squirter Screw For Streamlined Airflow
  • Internal Pump Passage On Metering Block w/Tunable Bleed Off
  • Built In Drain Plug Provides Easy Access to Empty Bowl
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust
See More
View Product

Holley – Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-80500)

Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny

from

$614.99
Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″ fuel line connection so there are no unnecessary trips back to the parts store.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Built In No Trouble Fuel Inlet Filter
  • Provides Precise Fuel Control For Low End Torque/Acceleration
  • Gen Iv No Trouble Power Valve
  • Three Vacuum Ports [1 Pcv/Brake 1 Timed Spark 1 Full]
  • Limited Lifetime Warranty Defects In Material/Workmanship
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More
View Product

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)

Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet

from

$649.99
Competition fuel curves provide safe and reliable horsepower for high performance race engines.

Product Features:
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
See More
View Product

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate (Part No.0-4412C)

Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate

from

$665.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to

Product Features:
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Does Not Work w/A.O.D. Transmissions
  • Installation/Tuning DVD Incl.
See More
View Product

Toyopet Crown Clutch Systems

National – Multi-Purpose Bearing (Part No.201-S)

Multi-Purpose Bearing

from

$24.29
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More
View Product

Driveworks – Ball Bearing (Part No.S-201-CC)

Ball Bearing

from

$2.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

(1 reviews)
View Product

Toyopet Crown Transmission Parts

National – Multi-Purpose Seal (Part No.470460)

Multi-Purpose Seal

from

$13.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

National – Multi-Purpose Seal (Part No.710319)

Multi-Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

National – Multi-Purpose Seal (Part No.223240)

Multi-Purpose Seal

from

$4.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

National – Multi-Purpose Bearing (Part No.30205)

Multi-Purpose Bearing

from

$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS — Precision manufactured using high-quality materials for durability and performance
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

(2 reviews)
View Product

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(8 reviews)
View Product

National – Multi-Purpose Seal (Part No.1177)

Multi-Purpose Seal

from

$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More
View Product

Search Over 55 Toyopet Crown Parts Online for Delivery or Pick Up

Looking for the best Toyopet Crown aftermarket replacement parts? Replacing worn and broken parts on your Toyopet Crown? Check out our online catalog to find the best selection of aftermarket Toyopet Crown parts as well as real user reviews on Toyopet Crown replacement parts. Make an informed decision about every component you add to your Crown.

At Advance Auto, we’ve got you covered when it comes to getting your Toyopet Crown in tip top condition. We’ve got over 55 Toyopet Crown parts to choose from in popular categories like Belts and Hoses, Cooling and Climate Controls and Air Intakes. If you’re looking for the best prices, try searching our Toyopet Crown parts catalog to compare OEM and aftermarket parts for your Toyopet Crown.

Whether you need Toyopet Crown body parts, interior components, or custom Toyopet Crown parts you can find them online at Advance Auto. Want to order your Clutch Systems online? Or maybe you need your Toyopet Transmission Parts same day? No problem, you can pick up Crown parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Toyopet Crown parts has never been easier.

Popular Types of Parts for Toyopet Crown

Advance Auto customers frequently search for the following types of Toyopet Crown auto parts. Check out customer reviews and ratings, and compare prices on the following Toyopet Crown parts:

More Popular Parts for All Makes