1963 Mercury Comet Differentials

Essential 1963 Mercury Comet Differentials

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Preload Shim Kit For Chrysler 8.75" & Ford 9"

from

$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:
  • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
See More

Yukon Gear – 8" Ford Pilot Bearing Retainer (Part No.33254)

8" Ford Pilot Bearing Retainer

from

$13.99
8″ Ford pilot bearing retainer.

Product Features:
  • Pilot bearing retainer for Ford 8″
See More

National – Bearings (Part No.R-1535-TAV)

Bearings

from

$41.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • High radial load capacity makes them suitable for high speed applications
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)

Ring Gear Bolt

from

$1.99


Product Features:
  • BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200
See More

USA Standard Gear – Spool For Ford 9", 35 Spline (Part No.59025)

Spool For Ford 9", 35 Spline

from

$294.99
9″ FORD 35Spline SPOOL 30deg (EXCL M.WLMS) 2-3/16″ DECK , 2″ Journal .

Product Features:
  • Fits Ford 9″ with 35 spline axles
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – 8" Dropout Housing Gasket (Part No.23010)

8" Dropout Housing Gasket

from

$11.99
8″ dropout housing gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 8″
See More

Yukon Gear – 8" Ford Pinion Seal (Part No.30180)

8" Ford Pinion Seal

from

$24.99
8″ Ford pinion seal.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Ford 8″
See More

Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)

Pinion Install Kit For Ford 9" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ without aftermarket Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

Trac Loc Spring Plate For Ford 9" & 8"

from

$10.99
Product Features:
  • Trac Loc spring plate for Ford 8″ and 9″
See More

Yukon Gear – 9" Ford Pinion Nut, 35 Spline Large Pinion Oversize (Part No.33161)

9" Ford Pinion Nut, 35 Spline Large Pinion Oversize

from

$26.99
9″ Ford pinion nut, 35 spline Large pinion oversize.

Product Features:
  • Pinion nut
  • Fits Ford 9″ with 35 spline pinion
See More

Yukon Gear – O-Ring For 9" Ford (Part No.30028)

O-Ring For 9" Ford

from

$14.99
O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion support o-ring
  • Fits Ford 9″
See More

USA Standard Gear – Master Overhaul Kit for the Ford 8" Differential (Part No.37028)

Master Overhaul Kit for the Ford 8" Differential

from

$275.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 8″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 9" (Part No.55041)

Crush Sleeve Eliminator Kit For Ford 9"

from

$68.99
9″ Ford 2 piece solid preload pinion spacer, Daytona or standard.

Product Features:
  • Crush sleeve eliminator kit for Ford 9″ with 28 spline pinion
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Grizzly Locker For Ford 9" With 31 Spline Axles, Racing Design (Part No.28010)

Grizzly Locker For Ford 9" With 31 Spline Axles, Racing Design

from

$1183.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. This unit requires the use of a 3.250″ dropout. Use carrier bearing/race numbers LM104949/LM104911. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
  • Aggressive design for racing applications only
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford (Part No.33333)

Standard Open Or Tracloc Cross Pin Shafts And Block In Four Pinion Design For 9" Ford

from

$207.99
Standard open or TracLoc cross pin shafts and block in four pinion design for 9″ Ford.

Product Features:
  • Cross pin shaft and block kit
  • Fits Ford 9″
  • Includes cross pin block and three cross pin shafts
See More

Felpro – Differential Cover Gasket (Part No.RDS 13073)

Differential Cover Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

Pro-King – Differential Clutch Pack (Part No.763A119)

Differential Clutch Pack

from

$119.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Trac-Loc For Ford 8" Wtih 28 Spline Axles – Street Design (Part No.26002)

Trac-Loc For Ford 8" Wtih 28 Spline Axles - Street Design

from

$889.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8″ with 28 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 3.00 Ratio (Part No.24363)

High Performance Ring & Pinion Gear Set For Ford 9" In A 3.00 Ratio

from

$509.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 3.00 ratio
See More

National – Bearings (Part No.HM89443)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Standard Open Spider Gear Kit For 8" And 9" Ford With 28 Spline Axles And 2-Pinion Design (Part No.16031)

Standard Open Spider Gear Kit For 8" And 9" Ford With 28 Spline Axles And 2-Pinion Design

from

$285.99
Yukon standard open spider gear kit for 8″ and 9″ Ford with 28 spline axles and 2-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Ford 8″ and 9″ open differential with 28 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Powertrax – No-Slip Traction System (Part No.9206902800)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    1963 Mercury Comet Differentials

    Maybe you’re in the middle of a full rebuild of that 1963 Mercury Comet. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 97 different Differentials in our inventory ranging from $2.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1963 Mercury Comet running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1963 Mercury Comet. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1963 Mercury Comet, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 15 reviews in this category, some of the top rated parts include No-Slip Traction System with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1963 Mercury Comet rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1963 Mercury Comet Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1963 Mercury Comet demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Comet the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular National Differentials

    We carry National parts in our stock across Differential Pinion Pilot Bearings categories, plus more. For a 1963 Mercury Comet, our most popular National Differentials include:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    Differential Pinion Pilot Bearings

    FAQs for 1963 Mercury Comet Differentials

    What are the most purchased Differentials for the 1963 Mercury Comet?

    Out of 97 Differentials for the 1963 Mercury Comet, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $9.49
    This product is not rated
    Bearings
    Rear Differential Pinion Bearings
    Crush Sleeve
    from $10.99
    This product is not rated
    Crush Sleeve
    Differential Crush Sleeves

    What are the top-rated 1963 Mercury Comet Differentials?

    Top-rated Differentials for your 1963 Mercury Comet based on customer reviews/ratings are:
    No-Slip Traction System
    from $551.99
    (1)
    No-Slip Traction System
    “Installed, no issues, works great.”