1963 GMC 1500 Series Performance and Racing Products

Name: Accel Ignition Coil - SuperStock - Breakerless Electronic Coil - Chrome - This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00...
Brand: Accel
SKU: 8145C
Price: 84.29 USD

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1963 1500 Series. Advance Auto Parts has popular 1500 Series parts like Performance Fuel Systems, Performance Ignition Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other 1500 Series model years including 1960, 1961, 1962, 1964, 1965 and more. Select a category of 1963 GMC 1500 Series Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1963 GMC 1500 Series Performance and Racing Products Categories

Performance Oil Filters

Performance Carburetors

Performance Starters

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Exhaust Headers

Performance Shifters

Performance Valve Covers

Performance Water Outlet Gaskets

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Clutch Pressure Plate and Disc Sets

Performance Engine Valve Cover Gasket Sets

Performance Exhaust Manifold Gaskets

Performance Timing Covers and Tabs

Performance Camshaft and Lifter Kits

Performance Valve Cover Hardware

Performance Engine Rocker Arms

Performance Exhaust Header Hardware

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ignition Parts

Performance Engine Main Bearing Gasket Sets

Performance Engine Cylinder Heads

Performance Flywheels

Specialty and Racing Shifters

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1963 GMC 1500 Series

Accel Ignition Coil - SuperStock - Breakerless Electronic Coil - Chrome - This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00...

from

$84.29

“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”

Top Street Performance Chevy V8 3HP High Torque Chrome Tilton Style Starter, JM7001C

from

$189.99

TSP Starters guarantee reliable starting power. After all, what?s the point of a high performance engine if it doesn?t start? These reliable high torque starters feature a compact design for added clearance to fit most engine configurations. They are available in multiple styles and finishes.

Edelbrock Performer RPM Series fuel pump for SBC and W Series Chevy, 1721

from

$177.99

Edelbrock Performer RPM Series fuel pump for SBC and W Series Chevy, 1721.

Flowtech Universal Block Hugger, 10010FLT

from

$88.59

Hugger Toobs part number 10010FLT offers a universal installation solution for all small block Chevy V-8 applications. Includes left and right side pipes. (Headers sold separately)

Edelbrock Engine Water Pump Gasket Set, 7251

from

$14.99

Edelbrock No: 7251 Engine Water Pump Gasket Set Chevy Small Block. Is it time to rebuild your Edelbrock mechanical water pump- No problem- these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications

B & M Automatic Shifter - Megashifter - Universal, 80690

from

$549.99

“An icon for a reason: the MegaShifter’s positive ratcheting action and reverse lockout deliver confident shifts and NHRA/IHRA compliance, wrapped in classic T-handle and accordion-boot style. Comes with a trim-to-fit console, 5-ft cable, brackets, levers, chrome top plate with lighted indicator, and everything needed for most Chrysler, Ford, and GM 3-/4-speed autos (additional kits may be required). Overall: 13″” L x 6.6″” W x 12.6″” H.”

Mallory Distributor Wiring Harness, 29349

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

Competition Cams Mutha' Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit, CL12-601-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

from

$549.99

The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.

"Competition Cams Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16"" Stud, 1605-16"

from

$523.99

“Competition Cams Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16″” Stud, 1605-16. ”

from

$34.99

Edelbrock part No: 4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for preventing camshaft walk when used with a thrust button. Includes front crankshaft seal and features a bright chrome finish.

Mr. Gasket Alternator Bracket - F-Style - Chrome, 9850

from

$27.69

Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with No:9852.

Competition Cams Magnum 224/224 Hydraulic Flat Cam K-Kit, K12-211-2

from

$549.99

SMALL BLOCK CHEVY HYDRAULIC COMPLETE KIT – High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

from

$799.99

Engineered and built as a matched assembly, these Hays street/strip clutch kits will provide exceptional performance, durability and long term dependability. Kits designed for street and street strip applications to fit popular applications.

B & M Master Overhaul Kit For Powerglide Transmission, 21040

from

$459.99

The B&M Master Racing Overhaul Kit includes all gaskets, seals, bushings and high performance friction materials. No transbrake body gaskets or instructions included.

B & M Flexplate For 168 Tooth, 2-Piece Rear Main Seal, Chevy V8, 20230

from

$179.99

As performance levels increase, an O.E. style flex plate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance SFI approved flex plate designed for 1955-1985 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1965-up GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Mr. Gasket Thermocap Radiator Cap, 2471S

from

$55.29

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Edelbrock Performer RPM Small Block Chevy AIR-Gap Intake Manifold, 7501

from

$374.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

FEL-PRO Performance Engine Crankshaft Seal Kit, 2912

from

$38.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002

from

$18.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

B & M Automatic Shifter - Pro Stick - Universal, 80702

from

$511.99

The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add a billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and you end up with one good looking bullet-proof race shifter. This model Pro Stick comes out of the box ready for action for 1962-1973 GM Powerglide transmissions with forward shift pattern, includes a 5-foot Super Duty shift cable, cable bracket, PG Pro Lever, hardware and detailed instructions for an easy installation. Be sure to check out the optional brushed aluminum cover, classic white shift knob with a 12-volt momentary switch, or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Overall Dimensions – 8.25L x 2.92W x 9.25H Note: This model does not include an aluminum shift cover.

Mr. Gasket Chrome Valve Cover Wing Bolts, 9824

from

$19.59

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010

from

$51.99

FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1640

from

$22.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1802

from

$25.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

from

$10.39

This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

from

$207.99

High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

Competition Cams Magnum 252/252 Hydraulic Roller Cam, 12-470-8

from

$577.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Upgrade your 1963 GMC 1500 Series with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1963 GMC 1500 Series, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your 1500 Series functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Performance and Racing Products for the 1963 GMC 1500 Series, designed to meet your needs without breaking the bank. From Performance Fuel System replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1963 GMC 1500 Series at great prices. Our Performance and Racing Products inventory for this model ranges from just $10.39 to $1,332.99, with an average price of $303.95. Our 94 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1963 GMC 1500 Series without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1963 GMC 1500 Series, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, B & M, FEL-PRO Performance, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. B & M and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.3 stars rating. With 293 customer reviews and counting, our 1963 GMC 1500 Series Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1963 GMC 1500 Series is always ready to roll. We’re committed to providing you with everything you need to keep your 1500 Series in top shape, all in one place. Start shopping confidently below for your 1963 GMC 1500 Series!

Best-Selling Performance Fuel Systems for 1963 GMC 1500 Series

Enhance the driving experience in your GMC with 4 quality Performance Fuel System components, starting at $177.99.

show more show less

from

$177.99

Edelbrock Performer RPM Series fuel pump for SBC and W Series Chevy, 1721.

from

$549.99

Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX

from

$799.99

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C

from

$665.99

Most Popular 1963 GMC 1500 Series Performance Ignition Products

Customize your GMC with 6 Performance Ignition Products products like Performance Coils and Performance Ignition Parts, all priced under $204.99.

show more show less

from

$99.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

Accel Ignition Coil - Yellow - 42000v 1.4 ohm primary - Points - up to 6500 RPM - The 8140 super stock ignition coil is a canister style coil that ...

from

$49.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.

Accel Ignition Coil - Chrome - 42000v 1.4 ohm primary - Points - up to 6500 RPM - 8140C superstock ignition coil is a chrome canister style high pe...

from

$55.19

from

$84.29

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

Mallory Promaster Classic Series Ignition Coil, 29440

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Top Picks for 1963 GMC 1500 Series Performance Engines

Upgrade GMC 1500 Series with top-quality Performance Engines parts, including 56 OEM and aftermarket selections for your 1963 model.

show more show less

from

$10.39

This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

Edelbrock Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, 2701

from

$227.99

“Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “”tuned”” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!”

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003

from

$42.49

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004

from

$44.99

FEL-PRO Performance Engine Valve Cover Gasket Set, 1603

from

$31.99

FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Mr. Gasket Intake Manifold Bolt Set, 6091

from

$39.29

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Mr. Gasket Intake Manifold Bolt Set - Hex Head, 955G

from

$18.79

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Edelbrock Performer Plus Cam and Lifter Kit, Hydraulic Flat Tappet, 2102

from

$302.99

“Edelbrock Performer-Plus Camshaft No: 2102 is designed for 265-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2102 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 320HP and 382 Ft Lbs of Torque when paired with Performer EPS intake manifold No: 2701 and Performer cylinder heads No: 60909. 50-State Legal E.O. No: D-215-19 for 1957-86 small-block Chevrolet. Camshaft specifications: – Intake duration: 204 Degrees – Exhaust duration: 214 Degrees – Intake lift: .420″” – Exhaust lift: .442″” – Lobe separation: 112 Degree – Intake Center Line: 107 Degree – Vacuum: 14″””

Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Competition Cams Big Mutha' Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

from

$374.99

from

$51.99

Edelbrock Torker II Intake Manifold Small-Block Chevy, 5001

from

$281.99

Edelbrock part #5001 Torker II intake manifold is designed for 1955-86 high-performance’s street 262-400 c.i.d. small-block Chevys. This Torker manifold is a singe plane low rise intake that’s great for high performance applications that have limited hood clearance. The manifold has an exhaust crossover for easy cold weather warm-ups, but no provisions for exhaust heated chokes or EGR. Customers will need either electric or manual choke carburetors. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Intake manifold will fit Corvette and ’87 and later stock heads. Will not fit ’87 and later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles (trucks, vans etc.)

from

$22.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1819

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Edelbrock Performer Small-Block Chevy Intake Manifold for Street Performance, 3701

from

$359.99

Edelbrock Performer Small-Block Chevy Intake Manifold for Street Performance, 3701.

FEL-PRO Performance Performance Cylinder Head Gasket, 1025

from

$74.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Competition Cams Magnum 224/224 Hydraulic Flat Cam, 12-211-2

from

$293.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

from

$14.99

from

$25.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Edelbrock Small-Block Chevy E-Street Cylinder Head 70cc Pair, 5073

from

$1332.99

Edelbrock Small-Block Chevy E-Street Cylinder Head 70cc Pair, 5073.

Edelbrock Small-Block Chevy E-Street Cylinder Heads 64cc, 5089

from

$1292.00

Edelbrock Small-Block Chevy E-Street Cylinder Heads 64cc, 5089.

Competition Cams Magnum 252/252 Hydraulic Roller Cam and Lifter Kit, CL12-470-8

from

$1210.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

In-Demand Performance Oil Filters for 1963 GMC 1500 Series

Select from 2 premium Performance Oil Filters parts for your 1963 GMC 1500 Series, with prices ranging from $17.99 to $18.99.

show more show less

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N Limited Warranty.

from

$18.99

Most Sold 1963 GMC 1500 Series Performance Exhaust Products

Explore our best-selling GMC parts for the 1963 1500 Series among 7 OEM and aftermarket options starting from $21.39.

show more show less

FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1444

from

$32.99

from

$88.59

Hugger Toobs part number 10010FLT offers a universal installation solution for all small block Chevy V-8 applications. Includes left and right side pipes. (Headers sold separately)

from

$27.69

Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with No:9852.

from

$21.39

Flowtech Gaskets, 99161FLT. PERFORMANCE PARTS>PERFORMANCE EXHAUST>EXHAUST SYSTEMS>EXHAUST ACCESSORIES & OTHER from Flowtech

Flowtech Header Gaskets - Aluminum-Layered, 99150FLT

from

$99.99

“gasket will not because the “”Dead Soft”” aluminum conforms to create a leak-proof seal. REAL-SEALS can also be easily trimmed for port-matching and”

FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1448

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

from

$29.99

Taylor Gaskets Header Gasket, 66123.

Top-Rated Performance and Racing Products Brands For Your 1963 GMC 1500 Series

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1963 GMC 1500 Series. Below you’ll find some of our best rated Performance and Racing Products from K&N, B & M, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1963 1500 Series start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1963 GMC 1500 Series Performance and Racing Products

When it comes to maintaining or upgrading your 1963 GMC 1500 Series, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1963 GMC 1500 Series. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $18.49. Plus, with over 53 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(35)

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002

“K&n makes a great filter good racing purposes”

from $18.99

(18)

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002

“Good brand right price”

Popular B & M 1963 GMC 1500 Series Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1963 GMC 1500 Series owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1963 1500 Series, Advance Auto Parts carries a full inventory of 2 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $549.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $549.99

(1)

B & M Automatic Shifter – Megashifter – Universal, 80690

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

B & M Automatic Shifter - Unimatic - Universal, 80775

from $299.99

(3)

B & M Automatic Shifter – Unimatic – Universal, 80775

“Super easy to install, works nice.”

FAQs for 1963 GMC 1500 Series Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1963 GMC 1500 Series?

Out of 94 Performance and Racing Products that fit 1963 GMC 1500 Series, the following parts are the top sellers:

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (6120010) – $17.99
K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
Mr. Gasket Water Outlet Gasket, 740C (6120954) – $10.39

What’s the price range for 1963 GMC 1500 Series Performance and Racing Products?

Performance and Racing Product prices for the 1963 GMC 1500 Series start at $10.39 and go up to $1,332.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1963 GMC 1500 Series?

The average price for Performance and Racing Products for the 1963 GMC 1500 Series is $303.95. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC 1500 Series model years?

Yes, we currently carry Performance and Racing Products for 4 model years of GMC 1500 Series between 1960 and 1965. Performance and Racing Products are bought most frequently for the following model years: 1965, 1964, 1962, 1961, and 1960.

What are the cheapest Performance and Racing Products for my 1963 GMC 1500 Series?

The cheapest 1963 GMC 1500 Series Performance and Racing Products we carry in stock are:

Mr. Gasket Water Outlet Gasket, 740C (6120954) – $10.39
Edelbrock Engine Water Pump Gasket Set, 7251 (10441724) – $14.99
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (6120010) – $17.99
Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (6120970) – $18.79
K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99

What are the top-rated Performance and Racing Products that fit the 1963 GMC 1500 Series?

Out of 293 reviews by customers, our 1963 GMC 1500 Series Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1963 GMC 1500 Series and their top-rated products:

Performance Oil Filters
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (6120010) – $17.99
Performance Shifters
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (6120010) – $17.99
Performance Fuel Systems
- K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (6120010) – $17.99

What types of Performance and Racing Products do you sell for my 1963 GMC 1500 Series?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1963 GMC 1500 Series:

Can I get help with 1963 GMC 1500 Series Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC 1500 Series Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC 1500 Series Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1963 GMC 1500 Series Performance and Racing Products

Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)

Top Street Performance – Top Street Performance Chevy V8 3HP High Torque Chrome Tilton Style Starter, JM7001C (Part No.JM7001C)

Edelbrock – Edelbrock Performer RPM Series fuel pump for SBC and W Series Chevy, 1721 (Part No.1721)

Flowtech – Flowtech Universal Block Hugger, 10010FLT (Part No.10010FLT)

Edelbrock – Edelbrock Engine Water Pump Gasket Set, 7251 (Part No.7251)

B & M – B & M Automatic Shifter – Megashifter – Universal, 80690 (Part No.80690)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

Competition Cams – Competition Cams Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit, CL12-601-4 (Part No.CL12-601-4)

Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)

Competition Cams – "Competition Cams Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16"" Stud, 1605-16" (Part No.1605-16)

Edelbrock – Edelbrock Timing Chain Cover, 4860 (Part No.4860)

Mr. Gasket – Mr. Gasket Alternator Bracket – F-Style – Chrome, 9850 (Part No.9850)

Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam K-Kit, K12-211-2 (Part No.K12-211-2)

Hays – Hays Power Train, 85-113 (Part No.85-113)

B & M – B & M Master Overhaul Kit For Powerglide Transmission, 21040 (Part No.21040)

B & M – B & M Flexplate For 168 Tooth, 2-Piece Rear Main Seal, Chevy V8, 20230 (Part No.20230)

Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2471S (Part No.2471S)

Edelbrock – Edelbrock Performer RPM Small Block Chevy AIR-Gap Intake Manifold, 7501 (Part No.7501)

FEL-PRO Performance – FEL-PRO Performance Engine Crankshaft Seal Kit, 2912 (Part No.2912)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

B & M – B & M Automatic Shifter – Pro Stick – Universal, 80702 (Part No.80702)

Mr. Gasket – Mr. Gasket Chrome Valve Cover Wing Bolts, 9824 (Part No.9824)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010 (Part No.1010)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1640 (Part No.1640)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1802 (Part No.1802)

Mr. Gasket – Mr. Gasket Water Outlet Gasket, 740C (Part No.740C)

Mr. Gasket – Mr. Gasket Aluminum Valve Cover, 6854 (Part No.6854)

Competition Cams – Competition Cams Magnum 252/252 Hydraulic Roller Cam, 12-470-8 (Part No.12-470-8)

Edelbrock – Edelbrock Performer RPM Series fuel pump for SBC and W Series Chevy, 1721 (Part No.1721)

Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)

Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)

Holley – Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C (Part No.0-4412C)

Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)

Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)

Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)

Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)

Mr. Gasket – Mr. Gasket Water Outlet Gasket, 740C (Part No.740C)

Edelbrock – Edelbrock Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, 2701 (Part No.2701)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003 (Part No.1003)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004 (Part No.1004)

FEL-PRO Performance – FEL-PRO Performance Engine Valve Cover Gasket Set, 1603 (Part No.1603)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602 (Part No.1602)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set, 6091 (Part No.6091)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (Part No.955G)

Edelbrock – Edelbrock Performer Plus Cam and Lifter Kit, Hydraulic Flat Tappet, 2102 (Part No.2102)

Competition Cams – Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2 (Part No.CL12-210-2)

Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4 (Part No.CL12-602-4)

Edelbrock – Edelbrock Performer RPM Small Block Chevy AIR-Gap Intake Manifold, 7501 (Part No.7501)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010 (Part No.1010)

Edelbrock – Edelbrock Torker II Intake Manifold Small-Block Chevy, 5001 (Part No.5001)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1640 (Part No.1640)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1819 (Part No.1819)

Edelbrock – Edelbrock Performer Small-Block Chevy Intake Manifold for Street Performance, 3701 (Part No.3701)

FEL-PRO Performance – FEL-PRO Performance Performance Cylinder Head Gasket, 1025 (Part No.1025)

Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam, 12-211-2 (Part No.12-211-2)

Edelbrock – Edelbrock Engine Water Pump Gasket Set, 7251 (Part No.7251)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1802 (Part No.1802)

Edelbrock – Edelbrock Small-Block Chevy E-Street Cylinder Head 70cc Pair, 5073 (Part No.5073)

Edelbrock – Edelbrock Small-Block Chevy E-Street Cylinder Heads 64cc, 5089 (Part No.5089)

Competition Cams – Competition Cams Magnum 252/252 Hydraulic Roller Cam and Lifter Kit, CL12-470-8 (Part No.CL12-470-8)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2002 (Part No.HP-2002)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1444 (Part No.1444)

Flowtech – Flowtech Universal Block Hugger, 10010FLT (Part No.10010FLT)

Mr. Gasket – Mr. Gasket Alternator Bracket – F-Style – Chrome, 9850 (Part No.9850)

Flowtech – Flowtech Gaskets, 99161FLT (Part No.99161FLT)

Flowtech – Flowtech Header Gaskets – Aluminum-Layered, 99150FLT (Part No.99150FLT)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1448 (Part No.1448)

Taylor Gaskets – Taylor Gaskets Header Gasket, 66123 (Part No.66123)