1963 Chrysler New Yorker Drivetrains
More 1963 Chrysler New Yorker Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1963 Chrysler New Yorker, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1963 Chrysler New Yorker Drivetrains
Driveworks – Camshaft Seal (Part No.S-99139)
Motive Gear – Differential Gear Install Kit (Part No.C8.25IK)
Motive Gear – Differential Carrier Gear Kit (Part No.C7.25BI)
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.245)
from
$29.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)
from
$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 60
- Fits standard open and Trac Loc applications
USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #41 Housing with 25520/90 Differential bearings (Part No.37092)
from
$349.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’41’ case housing with 25520 carrier races
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Driveworks – Tapered Roller Bearing (Part No.S-JLM-704610)
Dorman – Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (sold by each) (Part No.615-144)
from
$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21042)
from
$252.99
Yukon 1541H alloy rear axle for Chrysler 8.75″ measuring 30″ with 30 splines and 5×4.5 bolt pattern. for use with C & E-Body only. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- 30″ long
- 5 x 4.5″ bolt pattern
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Pinion Install Kit For ’76 And Newer Chrysler 8.25" Differential (Part No.13004)
from
$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1976 and up Chrysler 8.25″
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)
from
$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.
Product Features:
See More
Product Features:
- U-Joint strap bolt
- Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
- 7290 u-joint size
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 4.88 Ratio (Part No.36268)
from
$334.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″
- 8.25″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 4.88 ratio
USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)
from
$474.99
Product Features:
See More
- Dropout housing
- Fits Chrylser 8.75″
- ’89’ case design
- Nodular iron for added strength
Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)
from
$8.99
Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
- 3/8″ x 24 thread
- .866″ long
Yukon Gear – Powr Lok Drive Belleville Plate For Dana 44 (Part No.16171)
National – Bearings (Part No.107-DD)
from
$38.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.8660S)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Motive Gear – Differential Crush Sleeve (Part No.3507575)
Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)
from
$5.99
Product Features:
See More
- Floater roll pin
- Fits Dana Spicer 44 and Chrysler 8.75″
- Powr Lok positraction only
National – Multi Purpose Seal (Part No.8516N)
from
$17.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Differential Pinion Yoke Assembly (Part No.697-528)
from
$136.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Motive Gear – Differential Pinion Shim Kit (Part No.1109)
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Popular 1963 Chrysler New Yorker Drivetrains Categories
1963 Chrysler New Yorker Drivetrains
You count on your 1963 Chrysler New Yorker to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 159 Drivetrains ranging in price from $2.49 to $919.99, you’re sure to find everything you need for your 1963 Chrysler New Yorker.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Driveworks, National, and Yukon Gear. 1963 Chrysler New Yorker Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 202 extensive product reviews on 1963 Chrysler New Yorker Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Greaseable Premium Universal Joint with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1963 Chrysler New Yorker below to get started!
Top-Rated Drivetrains Brands For Your 1963 Chrysler New Yorker
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1963 Chrysler New Yorker running right for years to come. In our inventory you’ll find brands like Driveworks, National, Yukon Gear, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1963 Chrysler New Yorker back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1963 Chrysler New Yorker, and some of our most reviewed National parts include:
FAQs for 1963 Chrysler New Yorker Drivetrains
What are the most purchased Drivetrains for the 1963 Chrysler New Yorker?
Out of 159 Drivetrains for the 1963 Chrysler New Yorker, the most popular in our inventory are:
What are the top-rated 1963 Chrysler New Yorker Drivetrains?
Top-rated Drivetrains for your 1963 Chrysler New Yorker based on customer reviews/ratings are:
from
$26.99
(1)
Greaseable Premium Universal Joint
“the u-joint itself fit fine however the grease fitting is too large for the hole provided in the u-joint. I had to enlarge the hole to fit the fitting”
