1963 Chevrolet Impala Wheels and Tires
More 1963 Chevrolet Impala Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1963 Chevrolet Impala, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1963 Chevrolet Impala Wheels and Tires
McGard – Black Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64015)
from
$34.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
McGard – SplineDrive Lug Nut Installation Tool for McGard SplineDrive Lug Nuts (Part No.65200)
from
$129.99
SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a M14x1.5 thread size. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- For use only with McGard SplineDrive lug nuts with a M14x1.5 thread size.
- Installation Tool has 1″ Hex Size
- Bulk Box of 10 Installation Tools
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Bearing and Hub Assembly: Front/Rear, 5 Studs (Part No.951-301)
from
$211.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Driveworks – Wheel Hub Assembly (Part No.NT513121)
from
$105.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
KAI – Wheel Bring Dust Cap (Part No.GMK4043595611P)
from
$34.99
New Goodmark Pair Of Front Wheel Bearing Caps
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Spindle Dust Cap 2-3/32 In. Diameter (sold by each) (Part No.618-102)
from
$2.79
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 1/2-20 Thread, Flanged, Cragar SST Mag, 2.237"" Length, Chrome, 1 Pack (Part No.611-157.1)
from
$3.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 7/16-20 Thread, Flanged, Mag, 1.684" Length, Chrome, 4 Pack (Part No.711-108)
from
$8.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – M12-1.50 Serrated Wheel Stud – 12.73mm Knurl, 41.5mm Length (Part No.610-254)
from
$3.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – 7/16-20 Serrated Wheel Stud – .472 In. Knurl, 1-1/2 In. Length (Part No.610-186)
from
$2.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Driveworks – Oil Seal (Part No.S-8871)
from
$3.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Oil Seal (Part No.S-7934S)
from
$9.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
KAI – Wheel Housing (Part No.GMK404467565R)
from
$119.99
New Goodmark Wheelhouse Rear Passenger Side Outer
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Housing (Part No.GMK4043670612R)
from
$74.99
New Goodmark Passenger Side Wheelwell Box Brace Cover, For All Models Except Wagon
Product Features:
See More
Product Features:
- For All Models Except Wagon
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" L, Gunmetal, 16 Nuts/4 Locks/1 Key (Part No.711-235H)
from
$61.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-255)
from
$40.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Gunmetal, 20 Locks/1 Key (Part No.711-355H)
from
$44.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.5573)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ACDelco – Tire Pressure Monitoring System (TPMS) Sensor (Part No.20925924)
from
$114.99
ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Battery is made to last up to 10 years of normal use
- Designed to communicate perfectly with your GM vehicle’s TPMS Module
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
REDI-Sensor – REDI-Sensor Rubber Snap-in Stem 315 Mhz — 1 Sensor (Part No.SE10006)
from
$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Rubber clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65515BK)
from
$299.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
McGard – Chrome Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size) (Part No.84550)
from
$104.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.406" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-341)
from
$40.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Black Bulge Cone Seat Wheel Installation Kit for 5 Lug Vehicles (1/2"-20 Thread Size) (Part No.84551)
from
$134.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Popular 1963 Chevrolet Impala Wheels and Tires Categories
1963 Chevrolet Impala Wheels and Tires
You count on your 1963 Chevrolet Impala to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 38 Wheels and Tires ranging in price from $1.79 to $414.99, you’re sure to find everything you need for your 1963 Chevrolet Impala.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 6 different brands like Dorman, Schrader, and National. 1963 Chevrolet Impala Wheels and Tires start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 400 extensive product reviews on 1963 Chevrolet Impala Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Lug Nut & Lock Set: 7/16-20 Thread, Conical 60, Acorn, 1.432" L, Chrome, 16 Nuts/4 Locks/1 Key with 4.7 stars and Wheel Lug Nut: 7/16-20 Thread, Conical 60, Acorn, 1.375" Length, Chrome, 4 Pack with 4.7 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1963 Chevrolet Impala below to get started!
Top-Rated Wheels and Tires Brands For Your 1963 Chevrolet Impala
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1963 Chevrolet Impala running right for years to come. In our inventory you’ll find brands like Dorman, Schrader, National, and even more.
Popular McGard Wheels and Tires
You’ll find popular McGard brand products across Wheel Hardware. All are waiting to get your 1963 Chevrolet Impala back on the road. Some of the top-rated McGard products in these categories are:
from
$124.99
(1)
Chrome Cone Seat Wheel Installation Kit for 5 Lug Vehicles (7/16"-20 Thread Size)
Custom Wheel Lug Nut and Lock Sets
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1963 Chevrolet Impala, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 1963 Chevrolet Impala Wheels and Tires
What are the most purchased Wheels and Tires for the 1963 Chevrolet Impala?
Out of 38 Wheels and Tires for the 1963 Chevrolet Impala, the most popular in our inventory are:
from
$1.79
This product is not rated
Wheel Nut 7/16-20 Standard – 3/4 In. Hex, 9/16 In. Length
Wheel Lug Nuts
from
$2.49
This product is not rated
7/16-20 Serrated Wheel Stud – .472 In. Knurl, 1-1/2 In. Length
Wheel Studs
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
What are the top-rated 1963 Chevrolet Impala Wheels and Tires?
Top-rated Wheels and Tires for your 1963 Chevrolet Impala based on customer reviews/ratings are:
from
$33.49
(3)
Wheel Lug Nut & Lock Set: 7/16-20 Thread, Conical 60, Acorn, 1.432" L, Chrome, 16 Nuts/4 Locks/1 Key
“Nice set, everything in one package!!!”
from
$5.29
(3)
Wheel Lug Nut: 7/16-20 Thread, Conical 60, Acorn, 1.375" Length, Chrome, 4 Pack
“Nice product. However I found it somewhat odd that these are sold in a package of 4. Most cars that I have owned have 5 lug nuts per wheel. This singl”
from
$2.99
(2)
Wheel Lug Nut: 7/16-20 Thread, Flanged, Cragar SST Mag, 2.234"" Length, Chrome, 1 Pack
“Perfect fit
Great finish”
