1963 Cadillac Series 75 Fleetwood Alternators and Starters
Find Your Specific 1963 Cadillac Series 75 Fleetwood Alternators and Starters
Below you will find various in-demand Cadillac Alternators and Starters, components and accessories for your 1963 Series 75 Fleetwood. Advance Auto Parts has popular Series 75 Fleetwood parts like Ignition Lock Parts, Voltage Regulator Parts, Alternator Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Series 75 Fleetwood model years including
1955,
1956,
1957,
1958,
1959,
1960,
1961,
1962,
1964 and more. Select a category of 1963 Cadillac Series 75 Fleetwood Alternators and Starters below and start saving instantly.
Popular 1963 Cadillac Series 75 Fleetwood Alternators and Starters Categories
Essential Alternators and Starters for 1963 Cadillac Series 75 Fleetwoods
Carquest Premium – Alternator Diode (Part No.SCA1043)
from
$4.79
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – New Voltage Regulator, Electronic, 5 Amps (Part No.RAA1051)
from
$62.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – New Voltage Regulator (Part No.RAA1016)
from
$139.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – Multi-Use Connector (Part No.PTA1263)
from
$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Lock Cylinder (Part No.CSA3357)
from
$20.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.203-F)
from
$18.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Alternator: Remanufactured, 63 Amps, Limited Lifetime Warranty (Part No.7111A)
from
$125.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Premium – Starter Brush (Part No.XAA1014)
from
$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Brush Set (Part No.X265)
from
$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Multi-Use Connector (Part No.PTA1097)
from
$3.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest – Starter Bushing (Part No.SB0)
from
$3.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Bushing (Part No.SBA5143)
from
$1.79
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5145)
from
$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5148)
from
$2.79
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1005)
from
$30.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.S100)
from
$32.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
- The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Solenoid (Part No.SAC1146)
from
$39.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Solenoid (Part No.SBC3855)
from
$86.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Upgrade your 1963 Cadillac Series 75 Fleetwood with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 1963 Cadillac Series 75 Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Alternators and Starters are key to keeping your Series 75 Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Alternators and Starters for the 1963 Cadillac Series 75 Fleetwood, designed to meet your needs without breaking the bank.
From
Ignition Lock Part
replacements to
Voltage Regulator Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1963 Cadillac Series 75 Fleetwood at great prices.
Our Alternators and Starters inventory for this model
ranges from just $1.79 to $559.99, with
an average price of $82.48.
Our 18 Alternators and Starters in stock come from 4 trusted brands, so you’re sure to find the right part for your 1963 Cadillac Series 75 Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1963 Cadillac Series 75 Fleetwood, we stock popular OEM and aftermarket Alternators and Starters from top names
like Carquest Premium, and more.
Carquest Premium Alternators and Starters
start at just $125.99 and boast an impressive 4.4 stars average rating from customers.
With 8 customer reviews and counting, our 1963 Cadillac Series 75 Fleetwood Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1963 Cadillac Series 75 Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Series 75 Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1963 Cadillac Series 75 Fleetwood!
Best-Selling Ignition Lock Parts for 1963 Cadillac Series 75 Fleetwoods
Enhance the driving experience in your Cadillac with 1 quality Ignition Lock Part components, starting at $20.99.
Carquest Premium – Ignition Lock Cylinder (Part No.CSA3357)
from
$20.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Most Popular 1963 Cadillac Series 75 Fleetwood Voltage Regulator Parts
Customize your Cadillac with 2 Voltage Regulator Parts products
like Voltage Regulators and
Voltage Regulator Connectors, all
priced under $62.99.
Carquest Premium – Multi-Use Connector (Part No.PTA1263)
from
$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – New Voltage Regulator, Electronic, 5 Amps (Part No.RAA1051)
from
$62.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Top Picks for 1963 Cadillac Series 75 Fleetwood Alternator Parts
Upgrade Cadillac Series 75 Fleetwoods with top-quality Alternator Parts parts, including 7 OEM and aftermarket selections for your 1963 model.
Carquest Premium – Alternator: Remanufactured, 63 Amps, Limited Lifetime Warranty (Part No.7111A)
from
$125.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.203-F)
from
$18.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Multi-Use Connector (Part No.PTA1097)
from
$3.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Powermaster Performance – Alternator: 75 Amps Within Generator Style Case, 12V, 3/8" W Belt, Black (Part No.82051-2)
from
$559.99
The PowerGEN alternator delivers the classic appearance of a generator while offering the modern performance and reliability of an advanced alternator. Engineered from scratch with cutting-edge materials, it ensures durability and efficiency for your vehicle’s electrical system. Featuring one-wire operation, it simplifies installation and reduces clutter under the hood. Equipped with a heavy-duty regulator, it provides consistent and dependable power output, ranging from 75 amperes to 60 amperes at idle, making it ideal for demanding applications. Designed to fit generator bracketry seamlessly, this alternator is a perfect upgrade for vehicles requiring both style and functionality. With its robust construction and high-tech design, the PowerGEN alternator is a smart investment for enhancing your vehicle’s electrical performance while maintaining a vintage aesthetic.
Product Features:
See More
Product Features:
- One Wire Operation
- Heavy Duty Regulator
- 75 Ampere To 60 Ampere Idle
- Designed To Fit Generator Bracketry
- Delivers a vintage aesthetic with modern performance, combining durability and efficiency for enhanced vehicle electrical systems.
Powermaster Performance – Alternator: 75 Amps Within Generator Style Case, 12V, 3/8" W Belt, Black (Part No.82051)
from
$534.99
The PowerGEN alternator combines the classic appearance of a generator with the advanced performance and reliability of modern alternator technology. Engineered from scratch using high-tech materials, it delivers dependable power with a heavy-duty regulator and one-wire operation for simplified installation. With an impressive output of 75 amperes and idle performance down to 60 amperes, this alternator ensures consistent energy delivery for demanding applications. Designed to fit generator bracketry seamlessly, it offers a hassle-free upgrade without compromising compatibility. Whether you’re restoring a vintage vehicle or enhancing your current setup, the PowerGEN alternator provides exceptional durability, efficiency, and value, making it a smart choice for reliable power solutions.
Product Features:
See More
Product Features:
- One Wire Operation
- Heavy Duty Regulator
- 75 Ampere To 60 Ampere Idle
- Designed To Fit Generator Bracketry
- Delivers dependable power with advanced alternator technology, ensuring consistent energy delivery for demanding applications.
Carquest Premium – Alternator Diode (Part No.SCA1043)
from
$4.79
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
In-Demand Starter Parts for 1963 Cadillac Series 75 Fleetwoods
Select from 8 premium Starter Parts parts for your 1963 Cadillac Series 75 Fleetwood, with prices ranging from $1.79 to $39.99.
Carquest – Starter Solenoid (Part No.S100)
from
$32.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
- The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Starter Brush Set (Part No.X265)
from
$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Solenoid (Part No.SAC1146)
from
$39.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Bushing (Part No.SB0)
from
$3.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Bushing (Part No.SBA5143)
from
$1.79
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1005)
from
$30.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Brush (Part No.XAA1014)
from
$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5145)
from
$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Top-Rated Alternators and Starters Brands For Your 1963 Cadillac Series 75 Fleetwood
Shop for the best-rated brands offering Alternators and Starters and other products for your 1963 Cadillac Series 75 Fleetwoods. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium, and more. Alternators and Starters from these brands that fit a 1963 Series 75 Fleetwood start at just $125.99 and are rated as high as 4.4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1963 Cadillac Series 75 Fleetwood Alternators and Starters
When it comes to maintaining or upgrading your 1963 Cadillac Series 75 Fleetwood, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 1963 Cadillac Series 75 Fleetwood. With over 1 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $125.99. Plus, with over 3 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$125.99
(3)
Alternator: Remanufactured, 63 Amps, Limited Lifetime Warranty
“Voltage regulator has insulated standoffs. You don’t carry them.”
FAQs for 1963 Cadillac Series 75 Fleetwood Alternators and Starters
Which Alternators and Starters are best-sellers for 1963 Cadillac Series 75 Fleetwoods?
Out of 18 Alternators and Starters that fit 1963 Cadillac Series 75 Fleetwoods, the following parts are the top sellers:
- Starter Brush Set (5260531) – $6.29
- Starter Solenoid (12497506) – $39.99
- Multi-Purpose Bearing (3272710) – $18.99
What’s the price range for 1963 Cadillac Series 75 Fleetwood Alternators and Starters?
Alternators and Starter prices for the 1963 Cadillac Series 75 Fleetwood start at $1.79 and go up to $559.99 for the most premium parts.
What’s the average price of a Alternators and Starter for a 1963 Cadillac Series 75 Fleetwood?
The average price for Alternators and Starters for the 1963 Cadillac Series 75 Fleetwood is $82.48. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Cadillac Series 75 Fleetwood model years?
What are the cheapest Alternators and Starters for my 1963 Cadillac Series 75 Fleetwood?
The cheapest 1963 Cadillac Series 75 Fleetwood Alternators and Starters we carry in stock are:
- Starter Bushing (12522304) – $1.79
- Starter Bushing (12522034) – $1.99
- Multi-Use Connector (12447234) – $3.99
- Starter Bushing (5260582) – $3.99
- Alternator Diode (12522191) – $4.79
What are the top-rated Alternators and Starters that fit the 1963 Cadillac Series 75 Fleetwood?
Out of 8 reviews by customers, our 1963 Cadillac Series 75 Fleetwood Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1963 Cadillac Series 75 Fleetwood and their top-rated products:
- Starter Parts
- Starter Solenoid (18970450) – $32.05
- Alternator Parts
- Starter Solenoid (18970450) – $32.05
What types of Alternators and Starters do you sell for my 1963 Cadillac Series 75 Fleetwood?
As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1963 Cadillac Series 75 Fleetwood:
Can I get help with 1963 Cadillac Series 75 Fleetwood Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Alternators and Starters and more.
What is your return policy for Cadillac Series 75 Fleetwood Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Cadillac Series 75 Fleetwood Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
