1962 Pontiac Catalina Performance and Racing Products
Find Your Specific 1962 Pontiac Catalina Performance and Racing Products
Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1962 Catalina. Advance Auto Parts has popular Catalina parts like Performance Ignition Products, Performance Distributors, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Catalina model years including
1973,
1974,
1975,
1976,
1977,
1978,
1979,
1980,
1981 and more. Select a category of 1962 Pontiac Catalina Performance and Racing Products below and start saving instantly.
Popular 1962 Pontiac Catalina Performance and Racing Products Categories
Essential Performance and Racing Products for 1962 Pontiac Catalinas
Competition Cams – Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud (Part No.1605-16)
from
$476.99
Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud
Competition Cams – 10 Degree Steel Retainer for 26120 Beehive Spring (Part No.795-1)
from
$10.99
10 Degree Steel Retainer for 26120 Beehive Spring
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
B & M – Automatic Shifter, Sport Shifter (Part No.80776)
from
$371.99
The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.
Product Features:
See More
Product Features:
- Base Trims For Custom Fit
- Neutral Safety Switch
- Backup Light Switch
- Lighted Gear Indicator
- Black T-Handle and Cable
Mr. Gasket – Valve Cover (Part No.9800)
from
$75.99
Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.
Product Features:
See More
Product Features:
- Fits 1960-1986 Chevy 262-400 Small Block
- OEM height, short-style covers
- Chrome plated steel construction
- Perimeter style bolt pattern
- Features 1 breather/oil fill cap opening per valve cover
- Sold as a pair
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$17.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-222-4)
from
$403.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 8.280" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8 (Part No.7131-8)
from
$80.99
Magnum 8.280" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Accel – Contact Set Hp 32 Oz (Part No.110128)
from
$60.99
Heavy duty points sets are quipped with extra think contact arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mr. Gasket – Intake Gasket (Part No.502G)
from
$35.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals and distributor gasket where applicable
- For OE replacement, high performance street, drag race and oval track use
Competition Cams – Valve Seals, O-Ring 11/32" 1 St (Part No.501-16)
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1622)
from
$34.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$30.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Competition Cams – Single Outer Valve Springs: 1.494" Od, 1.080" Id (Part No.901-16)
from
$83.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance.
Product Features:
See More
Product Features:
- COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers
Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)
from
$405.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.50 in. Block To Hub Height
- Black Finish
Competition Cams – Magnum/Marine 244/244 Hydraulic Flat Cam (Part No.42-236-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – High Energy Timing Set for ’65-’83 Oldsmobile 260-455 (Part No.3213)
from
$51.99
High Energy Timing Set for ’65-’83 Oldsmobile 260-455
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
Product Features:
See More
Product Features:
- Classic good looks
- High current / voltage output
- Spark plug style terminal for excellent coil wire retention
- Brass contact terminals
- Mounting bracket included
- Can be used on inductive and CD ignitions
Mallory – Distributor Wiring Harness (Part No.29349)
from
$34.49
3-wire for ignition box.
Product Features:
See More
Product Features:
- Service Part
- Makes Connections Quick And Easy
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Accel – Gm HEI Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$53.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breaker less electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)
from
$61.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Cylinder Head Gasket Set for Pontiac, 4.20" bore size (Part No.7381)
Accel – Adj:Vac Adv GM V8 Point Dist (Part No.31034)
from
$60.99
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
- Instantly Increase Horsepower
- Maximum Possible Spark Advance
- Not Legal For Sale/Use In CA
Upgrade your 1962 Pontiac Catalina with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1962 Pontiac Catalina, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Catalina functioning at its best. At Advance Auto Parts, we offer a wide selection of 91 Performance and Racing Products for the 1962 Pontiac Catalina, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1962 Pontiac Catalina at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.99 to $819.99, with
an average price of $168.64.
Our 91 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1962 Pontiac Catalina without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1962 Pontiac Catalina, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, B & M, Holley, and more.
Edelbrock Performance and Racing Products
start at just $405.99 and boast an impressive 4.4 stars average rating from customers.
B & M and Holley also bring quality to the table, with Performance and Racing Products available starting at $371.99, and at an average 4.3 stars rating.
With 2,532 customer reviews and counting, our 1962 Pontiac Catalina Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1962 Pontiac Catalina is always ready to roll. We’re committed to providing you with everything you need to keep your Catalina in top shape, all in one place.
Start shopping confidently below for your 1962 Pontiac Catalina!
Best-Selling Performance Ignition Products for 1962 Pontiac Catalinas
Enhance the driving experience in your Pontiac with 8 quality Performance Ignition Product components, starting at $34.49.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Kit: Unil Conv: Delco: V8 (Part No.501)
from
$152.99
Domestic V8 with factory OEM distributors 50 STATES LEGAL OE D70-6 and D70-9
Product Features:
See More
Product Features:
- Easy to install with simple hand tools
- Improves performance and fuel efficiency
- Reduced maintenance
- Latest Thermal Clad based surface mount construction for maximum dependability and long life
- Available for all popular 12-volt negative ground domestic cars and trucks
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$53.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breaker less electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$116.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breaker less electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Contact Set Hp 32 Oz (Part No.110128)
from
$60.99
Heavy duty points sets are quipped with extra think contact arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Accel – Adj:Vac Adv GM V8 Point Dist (Part No.31034)
from
$60.99
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
- Instantly Increase Horsepower
- Maximum Possible Spark Advance
- Not Legal For Sale/Use In CA
Mallory – Distributor Wiring Harness (Part No.29349)
from
$34.49
3-wire for ignition box.
Product Features:
See More
Product Features:
- Service Part
- Makes Connections Quick And Easy
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
Product Features:
See More
Product Features:
- Classic good looks
- High current / voltage output
- Spark plug style terminal for excellent coil wire retention
- Brass contact terminals
- Mounting bracket included
- Can be used on inductive and CD ignitions
Most Popular 1962 Pontiac Catalina Performance Distributors
Customize your Pontiac with 3 Performance Distributors products
like Performance Distributor Components, all
priced under $17.99.
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$17.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)
from
$17.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$12.29
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Top Picks for 1962 Pontiac Catalina Performance Engines
Upgrade Pontiac Catalinas with top-quality Performance Engines parts, including 63 OEM and aftermarket selections for your 1962 model.
Competition Cams – Valve Seals, O-Ring 11/32" 1 St (Part No.501-16)
Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)
from
$405.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.50 in. Block To Hub Height
- Black Finish
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 12 Piece Set (Part No.1233)
from
$34.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)
from
$223.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$30.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – Cylinder Head Gasket Set for Pontiac, 4.20" bore size (Part No.7381)
Edelbrock – Intake Manifold Gasket for 1961-79 3626-389-400-421-428-455 Pontiac (Part No.7280)
from
$30.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1622)
from
$34.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1016)
from
$54.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Competition Cams – Ultra-Gold ARC Rocker Set with 1.5 Ratio for Pontiac 265-455 with 7/16" Stud (Part No.19060-16)
from
$621.99
Ultra-Gold ARC Rocker Set with 1.5 Ratio for Pontiac 265-455 with 7/16" Stud
Competition Cams – Ultra-Gold ARC Rocker Set with 1.65 Ratio for Pontiac 265-455 with 7/16" Stud (Part No.19061-16)
from
$621.99
Ultra-Gold ARC Rocker Set with 1.65 Ratio for Pontiac 265-455 with 7/16" Stud
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-600-5)
from
$429.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Magnum 248/248 Solid Flat Cam for Pontiac 265-455 (Part No.51-246-4)
from
$428.99
Magnum 248/248 Solid Flat Cam for Pontiac 265-455
Competition Cams – Magnum Muscle 232/237 Hydraulic Flat Cam for Pontiac 265-455 (Part No.51-314-4)
from
$428.99
Magnum Muscle 232/237 Hydraulic Flat Cam for Pontiac 265-455
Competition Cams – Factory Muscle 231/240 Hydraulic Flat Cam for Pontiac 265-455 (Part No.51-116-3)
from
$426.99
Factory Muscle 231/240 Hydraulic Flat Cam for Pontiac 265-455
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-223-4)
from
$416.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – 7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring (Part No.743-100)
from
$408.99
7 Degree Steel Retainer Set of 100 for 11/32" Valve with 1.437"-1.500" Spring
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-232-3)
from
$403.99
PONTIAC HYDRAULIC CAM AND LIFTER KIT – High Energy: Good low end and mid-range torque. Street performance, noticeable idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Pontiac engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good low end and mid-range torque. Street performance, noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-222-4)
from
$403.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 230/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-234-4)
from
$403.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
In-Demand Performance Valve Covers for 1962 Pontiac Catalinas
Select from 2 premium Performance Valve Covers parts for your 1962 Pontiac Catalina, with prices ranging from $106.99 to $403.99.
Edelbrock – ELITE (Part No.4130)
from
$403.99
ELITE
Mr. Gasket – Valve Cover (Part No.9805)
from
$106.99
Chrome plated stamped steel valve covers have a flat smooth top, with internal baffles. Tall-style cover provides extra valve train clearance. Sold as a pair.
Product Features:
See More
Product Features:
- Tall-style covers provide extra clearance
- Fits Pontiac 301-455 engines
- Sold as a pair
- Chrome plated steel construction
- Cadmium Plated To Resist Corrosion
- Easy Installation
Most Sold 1962 Pontiac Catalina Performance Fuel Systems
Explore our best-selling Pontiac parts for the 1962 Catalina among 9 OEM and aftermarket options starting from $407.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$474.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carbs (Part No.0-80508S)
from
$539.99
One of the most widely used Holley carbs of all times -the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
Product Features:
See More
Product Features:
Top-Rated Performance and Racing Products Brands For Your 1962 Pontiac Catalina
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1962 Pontiac Catalinas. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, B & M, and Holley, and more. Performance and Racing Products from these brands that fit a 1962 Catalina start at just $371.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1962 Pontiac Catalina Performance and Racing Products
When it comes to maintaining or upgrading your 1962 Pontiac Catalina, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1962 Pontiac Catalina. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $405.99, with an average price of just $439.66. Plus, with over 9 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$474.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
from
$437.99
(1)
Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)
“works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not ”
Popular B & M 1962 Pontiac Catalina Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1962 Pontiac Catalina owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1962 Catalina, Advance Auto Parts carries a full inventory of 2 B & M Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $371.99 to $539.99, plus, with more than 2 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$539.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
from
$371.99
(1)
Automatic Shifter, Sport Shifter
“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and
a knock out to drive.No down falls as far as I’m aw”
FAQs for 1962 Pontiac Catalina Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1962 Pontiac Catalinas?
Out of 91 Performance and Racing Products that fit 1962 Pontiac Catalinas, the following parts are the top sellers:
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
- High Performance Thermostat – 160 Degree Brass & Copper (17360031) – $29.99
- Super Stock Coil Chrome (5024277) – $53.99
What’s the price range for 1962 Pontiac Catalina Performance and Racing Products?
Performance and Racing Product prices for the 1962 Pontiac Catalina start at $7.99 and go up to $819.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1962 Pontiac Catalina?
The average price for Performance and Racing Products for the 1962 Pontiac Catalina is $168.64. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Catalina model years?
What are the cheapest Performance and Racing Products for my 1962 Pontiac Catalina?
The cheapest 1962 Pontiac Catalina Performance and Racing Products we carry in stock are:
- Flat 1 Piece Guide Plate for AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud (50288882) – $7.99
- 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
- 7 Degree Steel Retainer for 11/32" Valve with 1.437"-1.500" Spring (50289120) – $10.99
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $12.29
What are the top-rated Performance and Racing Products that fit the 1962 Pontiac Catalina?
Out of 2,532 reviews by customers, our 1962 Pontiac Catalina Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1962 Pontiac Catalina and their top-rated products:
- Performance Shifters
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Performance Fuel Systems
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
What types of Performance and Racing Products do you sell for my 1962 Pontiac Catalina?
As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1962 Pontiac Catalina:
Can I get help with 1962 Pontiac Catalina Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.
What is your return policy for Pontiac Catalina Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Pontiac Catalina Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
