1962 Ford Victoria Performance Engines

Essential 1962 Ford Victoria Performance Engines

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Engine Valve Cover Gasket Set

from

$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
  • Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1613)

Engine Valve Cover Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)

Intake Manifold Gasket for 1963-1996 Small-Block Fords

from

$28.99


Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Mr. Gasket – Intake Gasket (Part No.203G)

Intake Gasket

from

$36.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals and distributor gasket where applicable
  • For OE replacement, high performance street, drag race and oval track use
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

Lower Intake Manifold Gasket Set: 11 Piece Set

from

$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6683)

Ultra Seal: Oil Pan Gasket

from

$59.19
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:
  • Steel core provides rigidity, durability and prevents gasket push out
  • Molded rubber coating seals minor irregularities in pan surface
  • One piece design is easier to install and even less prone to leak
  • Direct replacement suitable for all uses – street, racing, heavy duty
  • Include both gasket and new oil pan bolts
  • No Cork Particles
  • Easy Removal For Disassembly
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Head Gasket (Part No.1132G)

Head Gasket

from

$37.59
Mr. Gasket Embossed Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. This is a very unique design that has a solid metal on metal fold at the combustion seal. This fold makes for a very stout seal that is almost the equivalent of a higher-end MLS (multi-layer steel) gasket with a gas stopper layer, but at a much lower cost. This gasket also has embossments around the coolant and oil passages and has a thick aluminum flake coating. All of these features result in a steel shim head gasket that handles extreme cylinder pressures very well. It’s probably the best steel shim head gasket you could ask for. Sold individually.

Product Features:
  • Embossed steel with aluminum flake coating
  • Solid metal over metal fold at the combustion seal
  • Embossed seals at coolant and oil passages
  • Approximately .020″ compressed thickness
  • For high performance street, drag race and oval track use.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1020)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$41.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7337)

Cylinder Head Gasket Set for Ford

from

$61.99
Product Features:
  • Cylinder Head Gasket Set
  • 1958-1976 390-428
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5896)

Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8

from

$125.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Edelbrock – Sure Seat Valve Springs for Ford 289-302 (Part No.5822)

Sure Seat Valve Springs for Ford 289-302

from

$54.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5796)

Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8

from

$186.99
Product Features:
  • Non-Rotator
  • 1.438 in. Outside Diameter
  • 1.024 in. Inside Diameter
  • 1.260 in. Coil Blind
  • Set of 16
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Intake Manifold Bolts

from

$19.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

Product Features:
  • Hex Head
  • Zinc Plated
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

Super Intake Manifold Bolts

from

$43.99
Super Intake Manifold Bolts

Edelbrock – Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish (Part No.1107)

Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish

from

$587.99
Product Features:
  • Flathead 4-Barrel Manifold
  • Dual Plane Type-4150 Style Flange
  • 4.06 in. Front Height, 5.06 in. Center Height, 6.06 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)

Performer 390 Intake Manifold for Ford FE, Satin Finish

from

$597.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – #21053 Performer 390 Intake Manifold, Ford FE, 332-428, Black Finish (Part No.21053)

#21053 Performer 390 Intake Manifold, Ford FE, 332-428, Black Finish

from

$479.99
The Edelbrock Performer 390 #21053 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8’s with medium- or low-rise cylinder heads. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or
See More

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)

Performer 289 Intake Manifold for Small-Block Ford

from

$299.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal
  • Available in Multiple Finishes
See More

Spectre – Water Neck; Ford 390-428 (Part No.4736)

Water Neck; Ford 390-428

from

$47.99
Spectre’s Ford water neck fits Ford 390, 427 and 428 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:
  • Fits Ford 390, 427 and 428 engines
  • Includes bolts and gasket
  • Chrome plated
  • Easy to install
See More

1962 Ford Victoria Performance Engines

Maybe you’re in the middle of a full rebuild of that 1962 Ford Victoria. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 19 different Performance Engines in our inventory ranging from $19.99 to $597.99. That means you can find the exact parts or products you need to keep that 1962 Ford Victoria running smoothly.

Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1962 Ford Victoria. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1962 Ford Victoria, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 17 reviews in this category, some of the top rated parts include Performer 390 Intake Manifold for Ford FE, Satin Finish with 4.0 stars and Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 with 1.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1962 Ford Victoria rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1962 Ford Victoria Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1962 Ford Victoria demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Victoria the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Spectre Performance Engines

We carry Spectre parts in our stock across Performance Water Outlets categories, plus more. For a 1962 Ford Victoria, our most popular Spectre Performance Engines include:
Water Neck; Ford 390-428
from $47.99
(1)
Water Neck; Ford 390-428
Performance Water Outlets

Top 1962 Ford Victoria Performance Engines from FEL-PRO Performance

FEL-PRO Performance products are another trusted brand when it comes to Performance Engines for your 1962 Ford Victoria. Popular FEL-PRO Performance parts include:
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $51.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $41.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets

FAQs for 1962 Ford Victoria Performance Engines

What are the most purchased Performance Engines for the 1962 Ford Victoria?

Out of 19 Performance Engines for the 1962 Ford Victoria, the most popular in our inventory are:
Intake Manifold Bolts
from $19.99
(1)
Intake Manifold Bolts
Performance Intake Manifold Hardware
Engine Valve Cover Gasket Set
from $46.99
(1)
Engine Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets
PERFORMANCE OIL PAN GASKET SET
from $27.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets

What are the top-rated 1962 Ford Victoria Performance Engines?

Top-rated Performance Engines for your 1962 Ford Victoria based on customer reviews/ratings are:
Performer 390 Intake Manifold for Ford FE, Satin Finish
from $597.99
(1)
Performer 390 Intake Manifold for Ford FE, Satin Finish
“lightweight-runs great…took 80lbs off my engine”
Sure Seat Valve Springs for Ford 429/460 V8 1969-1987
from $111.99
(1)
Sure Seat Valve Springs for Ford 429/460 V8 1969-1987
“THIS WAS NOT A COMPLETE KIT!ONLY GOT VALVE SPRINGS!!!”