1962 Dodge Custom Transmission Parts
Find Your Specific 1962 Dodge Custom Transmission Parts
Below you will find various in-demand Dodge Transmission Parts, components and accessories for your 1962 Custom. Advance Auto Parts has popular Custom parts like Automatic Transmission Pan and Gaskets, Automatic Transmission Parts, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other Custom model years including
1955,
1956,
1957,
1958,
1959,
1960,
1961,
1964,
1965 and more. Select a category of 1962 Dodge Custom Transmission Parts below and start saving instantly.
Popular 1962 Dodge Custom Transmission Parts Categories
Essential Transmission Parts for 1962 Dodge Customs
B & M – Transmission Cast Deep Pan, Brushed Finish TF727/ 518&618/48RE Cummins (Part No.10280)
from
$340.99
Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4 quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8 inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Note: Does not increase fluid capacity for the 48RE transmission.
Product Features:
See More
Product Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
- Cast Aluminum
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Clutch Pilot Bushing (Part No.690-005.1)
from
$4.29
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Tapered Roller Bearing Cone (Part No.25590)
from
$25.49
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)
from
$85.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
- Compatible with OEM cooler systems
- 33% more efficient than a comparable tube and fin design
National – Multi-Purpose Bearing (Part No.1307)
from
$73.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Seal (Part No.6879H)
from
$34.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
- Good dry heat resistance
- Excellent low temperature capability
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-331227H)
from
$11.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Seal (Part No.8160S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.7300S)
from
$17.79
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
B & M – Automatic Shifter, Sport Shifter (Part No.80776)
from
$362.99
The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.
Product Features:
See More
Product Features:
- Base Trims For Custom Fit
- Neutral Safety Switch
- Backup Light Switch
- Lighted Gear Indicator
- Black T-Handle and Cable
B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)
from
$472.99
The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H
Product Features:
See More
Product Features:
- All One-Handed
- Reverse Lockout Meets NHRA And IHRA Requirements
- Mount Directly To Floor/Chassis/Or w/Quick Release
- Ultimate For Powerglide Applications
- Lightweight Brushed Alum. Cover
- Cover Removed Quickly and Easily
- Includes 5 Ft. Super Duty Race Cable
- Quick Change Plate Design
Felpro – Transmission Oil Pan Gasket 18 Bolt Hole One Piece Gasket (Part No.TOS 18407)
from
$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Victor Reinz – Transmission Oil Pan Gasket (Part No.71-14935-00)
from
$10.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)
National – Multi Purpose Seal (Part No.8609)
from
$9.99
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8697)
from
$26.99
Chrysler 727 Transmission Pan Gasket – Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
Felpro – Transmission Oil Pan Gasket 18 Bolt Hole One Piece Gasket (Part No.TOS 18333)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi-Purpose Bearing (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Hays – Hays Race Tq Conv Tf727 36-4200 Stall (Part No.97-3A36F)
from
$1049.99
Hays Race Tq Conv Tf727 36-4200 Stall
Hays – Hays Race Convtr Tf727 24-2800 Stall (Part No.97-3A24F)
from
$899.99
Hays Race Convtr Tf727 24-2800 Stall
Hays – Hays Race Conv 727 W/O Weights: 32-3600 (Part No.97-3A32F)
from
$999.99
Hays Race Conv 727 W/O Weights: 32-3600
B & M – Torque Converter, Tork Master 2000 (Part No.10416)
from
$389.99
Similar in performance characteristics to the Holes hot series, the Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Upgrade your 1962 Dodge Custom with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 1962 Dodge Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Transmission Parts are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Transmission Parts for the 1962 Dodge Custom, designed to meet your needs without breaking the bank.
From
Automatic Transmission Pan and Gasket
replacements to
Automatic Transmission Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1962 Dodge Custom at great prices.
Our Transmission Parts inventory for this model
ranges from just $3.99 to $1,049.99, with
an average price of $177.88.
Our 38 Transmission Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1962 Dodge Custom without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1962 Dodge Custom, we stock popular OEM and aftermarket Transmission Parts from top names
like National, DriveWorks, Imperial, and more.
National Transmission Parts
start at just $15.99 and boast an impressive 4.3 stars average rating from customers.
DriveWorks and Imperial also bring quality to the table, with Transmission Parts available starting at $10.99, and at an average 4.3 stars rating.
With 356 customer reviews and counting, our 1962 Dodge Custom Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1962 Dodge Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place.
Start shopping confidently below for your 1962 Dodge Custom!
Best-Selling Automatic Transmission Pan and Gaskets for 1962 Dodge Customs
Enhance the driving experience in your Dodge with 7 quality Automatic Transmission Pan and Gasket components, starting at $9.99.
Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18583)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Mr. Gasket – Auto Trans Oil Pan (Part No.9745CMRG)
from
$87.99
These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.
Product Features:
See More
Product Features:
- Chrome / Steel
- Stock capacity
- Includes drain plug, gasket and hardware
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8697)
from
$26.99
Chrysler 727 Transmission Pan Gasket – Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
B & M – Transmission Cast Deep Pan, Brushed Finish TF727/ 518&618/48RE Cummins (Part No.10280)
from
$340.99
Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4 quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8 inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Note: Does not increase fluid capacity for the 48RE transmission.
Product Features:
See More
Product Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
- Cast Aluminum
Mr. Gasket – Auto Trans Oil Pan (Part No.9745BMRG)
from
$81.99
These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.
Product Features:
See More
Product Features:
- EDP Black Steel
- Stock capacity
- Includes drain plug, gasket and hardware
Mr. Gasket – Gaskets (Part No.61090MRG)
from
$56.99
These transmission oil pan gaskets are made with a glass-filled nylon carrier with molded rubber on both the top and bottom of the gasket. Each bolt hole has a torque limiter that helps to avoid over-torqueing the bolts for a reliable seal. These gasket are reusable and can be cleaned using soap and water. Ideal for applications that require frequent service. Made in the USA.
Product Features:
See More
Product Features:
- Molded rubber over glass filled nylon carrier
- Reusable ¿ easy cleaning w/ soap & water
- Reusable ┐ easy cleaning w/ soap & water
- Torque Limiters ¿ helps to avoid over torqueing gaskets
- Torque Limiters ┐ helps to avoid over torqueing gaskets
- Applications for many common transmissions
- Ideal for applications that require frequent service
- Made in the USA
Victor Reinz – Transmission Oil Pan Gasket (Part No.71-14935-00)
from
$10.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Most Popular 1962 Dodge Custom Automatic Transmission Parts
Customize your Dodge with 1 Automatic Transmission Parts products
like Transmission Bushings, all
priced under $4.29.
Dorman – Clutch Pilot Bushing (Part No.690-005.1)
from
$4.29
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 1962 Dodge Custom Transmission Bearings
Upgrade Dodge Customs with top-quality Transmission Bearings parts, including 7 OEM and aftermarket selections for your 1962 model.
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.A-2)
from
$15.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.205)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.25520)
from
$9.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Tapered Roller Bearing Cone (Part No.25590)
from
$25.49
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.25821)
from
$13.29
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Tapered Roller Bearing (Part No.S-25520)
In-Demand Transmission Cooler and Parts for 1962 Dodge Customs
Select from 10 premium Transmission Cooler and Parts parts for your 1962 Dodge Custom, with prices ranging from $25.99 to $85.99.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
Product Features:
See More
- Imperial Maxi-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)
from
$85.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
- Compatible with OEM cooler systems
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)
from
$65.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)
from
$80.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)
from
$52.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$83.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- Up to Class C motorhomes, towing up to 5,000 pounds
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)
from
$65.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Most Sold 1962 Dodge Custom Transmission Seals
Explore our best-selling Dodge parts for the 1962 Custom among 4 OEM and aftermarket options starting from $3.99.
Driveworks – Oil Seal (Part No.S-331227H)
from
$11.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.8609)
from
$9.99
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Seal (Part No.8160S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)
Top-Rated Transmission Parts Brands For Your 1962 Dodge Custom
Shop for the best-rated brands offering Transmission Parts and other products for your 1962 Dodge Customs. Below you’ll find some of our best rated Transmission Parts from National, DriveWorks, and Imperial, and more. Transmission Parts from these brands that fit a 1962 Custom start at just $10.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1962 Dodge Custom Transmission Parts
When it comes to maintaining or upgrading your 1962 Dodge Custom, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1962 Dodge Custom. With over 2 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $16.49. Plus, with over 63 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular DriveWorks 1962 Dodge Custom Transmission Parts
DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 1962 Dodge Custom owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1962 Custom, Advance Auto Parts carries a full inventory of 2 DriveWorks Transmission Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $10.99 to $11.49, plus, with more than 125 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
FAQs for 1962 Dodge Custom Transmission Parts
Which Transmission Parts are best-sellers for 1962 Dodge Customs?
Out of 38 Transmission Parts that fit 1962 Dodge Customs, the following parts are the top sellers:
- High Performance Transmission Oil Cooler (3670013) – $83.99
- Multi-Purpose Bearing (3275973) – $16.99
- Multi-Purpose Bearing (3275809) – $15.99
What’s the price range for 1962 Dodge Custom Transmission Parts?
Transmission Part prices for the 1962 Dodge Custom start at $3.99 and go up to $1,049.99 for the most premium parts.
What’s the average price of a Transmission Part for a 1962 Dodge Custom?
The average price for Transmission Parts for the 1962 Dodge Custom is $177.88. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Dodge Custom model years?
What are the cheapest Transmission Parts for my 1962 Dodge Custom?
The cheapest 1962 Dodge Custom Transmission Parts we carry in stock are:
- Auto Transmission Manual Shaft Seal (11494000) – $3.99
- Clutch Pilot Bushing (22972511) – $4.29
- Tapered Roller Bearing (10659703) – $4.99
- Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (5785235) – $9.99
- Bearing Race (18440327) – $9.99
What are the top-rated Transmission Parts that fit the 1962 Dodge Custom?
Out of 356 reviews by customers, our 1962 Dodge Custom Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1962 Dodge Custom and their top-rated products:
- Transmission Cooler and Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Econo-Kool® Transmission Oil Cooler (20230020) – $52.99
- Automatic Transmission Pan and Gaskets
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Econo-Kool® Transmission Oil Cooler (20230020) – $52.99
- Transmission Seals
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Econo-Kool® Transmission Oil Cooler (20230020) – $52.99
What types of Transmission Parts do you sell for my 1962 Dodge Custom?
As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1962 Dodge Custom:
Can I get help with 1962 Dodge Custom Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Transmission Parts and more.
What is your return policy for Dodge Custom Transmission Parts?
Advance Auto Parts keeps returns simple. For new Dodge Custom Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
