1962 Chevrolet P20 Series Ignition and Tune-Up Products

Essential 1962 Chevrolet P20 Series Ignition and Tune-Up Products

Carquest – Distributor Rotor (Part No.D152)

Distributor Rotor

from

$8.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Carquest Premium – Distributor T1612: 100% New, With Cap and Rotor (Part No.T1612)

Distributor T1612: 100% New, With Cap and Rotor

from

$73.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100811 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Carquest Premium – Ignition Contact Set (Part No.AKA1002)

Ignition Contact Set

from

$21.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Contact Set (Points) (Part No.A120V)

Contact Set (Points)

from

$24.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
  • Stainless steel spring resists corrosion
See More

Carquest Premium – Distributor Cap (Part No.CAE1058)

Distributor Cap

from

$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1786)

Distributor Cap and Rotor Kit

from

$13.79
Distributor Cap and Rotor Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1799)

Ignition Conversion Kit

from

$415.99
Ignition Conversion Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1756)

Ignition Conversion Kit

from

$234.99
Ignition Conversion Kit

NGK – NGK Wire Set (Part No.51426)

NGK Wire Set

from

$28.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8328)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Felpro – Distributor Mounting Gasket (Part No.12665)

Distributor Mounting Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8040)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$57.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

NGK – NGK Wire Set (Part No.51434)

NGK Wire Set

from

$40.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP65)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

Champion – Champion Copper Plus Small Engine- Single Card – J8C (Part No.841-1)

Champion Copper Plus Small Engine- Single Card - J8C

from

$2.99
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1015)

Distributor Vacuum Advance

from

$31.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8139)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$40.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

ACDelco – Ignition Capacitor (Part No.D203)

Ignition Capacitor

from

$21.79
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

1962 Chevrolet P20 Series Ignition and Tune-Up Products

You count on your 1962 Chevrolet P20 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 87 Ignition and Tune-Up Products ranging in price from $1.49 to $415.99, you’re sure to find everything you need for your 1962 Chevrolet P20 Series.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like ACDelco, E3, and Carquest. 1962 Chevrolet P20 Series Ignition and Tune-Up Products start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 169 extensive product reviews on 1962 Chevrolet P20 Series Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Coil with 4.5 stars and Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.7 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1962 Chevrolet P20 Series below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1962 Chevrolet P20 Series

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Chevrolet P20 Series running right for years to come. In our inventory you’ll find brands like ACDelco, E3, Carquest, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1962 Chevrolet P20 Series back on the road. Some of the top-rated Champion products in these categories are:

FAQs for 1962 Chevrolet P20 Series Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1962 Chevrolet P20 Series?

Out of 87 Ignition and Tune-Up Products for the 1962 Chevrolet P20 Series, the most popular in our inventory are:

What are the top-rated 1962 Chevrolet P20 Series Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1962 Chevrolet P20 Series based on customer reviews/ratings are:
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”
OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR6S
from $2.99
(6)
OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR6S
“I have a 1969 chevy c10 truck and this made my truck run ten times better. im pretty sure i gained a few more horse power. it was super easy to instal”