1962 Chevrolet K10 Drive Shafts and Axles
More 1962 Chevrolet K10 Drive Shafts and Axles
Find your specific 1962 Chevrolet K10 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1962 Chevrolet K10 Drive Shafts and Axles
Yukon Gear – Wheel Lug Stud (Part No.33571)
from
$7.99
Wheel Lug Stud
Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)
from
$5.99
Product Features:
See More
- Rear axle stud for Dana Spicer 44 and AMC Model 35
- 1/2″ x 20 thread
- 0.618″ knurl diameter
- 1 15/32″ long
- 31/64″ shoulder length
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)
from
$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2002
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 3.50 INCH / 89 MM
- MOUNT WIDTH: 1.50 INCH / 38 MM
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)
from
$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Product Features:
See More
Product Features:
- Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)
from
$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).
Product Features:
See More
Product Features:
- Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
- Intalls next to side gear
National – Shaft Repair Sleeve (Part No.99162)
from
$25.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99112)
from
$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)
from
$189.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 30 spline
- Mechanics 3R u-joint size
- 2.556″ snap ring span
- 1.125″ cap diameter
- Inside snap ring design
- Strap style
Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)
from
$225.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Bearings (Part No.B-2610)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.107)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-B-2610)
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)
from
$28.99
Product Features:
See More
- Bearing retainer
- Fits Dana Spicer 44 in Jeep TJ
- 1 5/8″ x 3 3/16″ bolt pattern
- 3/16″ bolt holes
Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)
from
$17.99
Product Features:
See More
- Bearing retainer
- Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)
from
$19.99
Product Features:
See More
- Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
- 3/8″ bolt holes
- 1 5/8öx3 3/16ö bolt pattern
Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)
Pro-King – Axle Seal (Part No.714G076)
from
$10.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Driveworks – Oil Seal (Part No.S-5131)
from
$9.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.5131)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8835S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Mighty Seal (Part No.30083)
from
$7.99
Front wheel seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front wheel bearing seal
- Fits 1955-1993 GM half ton front
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Yukon Gear – Axle Seal For ’55 To ’62 1/2 Ton GM (Part No.30056)
from
$108.99
Axle seal for ’55 to ’62 1/2 ton GM.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle seal
- Fits 1955-1964 GM passenger car
Popular 1962 Chevrolet K10 Drive Shafts and Axles Categories
1962 Chevrolet K10 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1962 Chevrolet K10. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 27 different Drive Shafts and Axles in our inventory ranging from $4.99 to $312.99. That means you can find the exact parts or products you need to keep that 1962 Chevrolet K10 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1962 Chevrolet K10. Spicer, Anchor, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1962 Chevrolet K10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1962 Chevrolet K10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1962 Chevrolet K10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1962 Chevrolet K10 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your K10 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Spicer Drive Shafts and Axles
We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1962 Chevrolet K10, our most popular Spicer Drive Shafts and Axles include:
Top 1962 Chevrolet K10 Drive Shafts and Axles from Anchor
Anchor products are another trusted brand when it comes to Drive Shafts and Axles for your 1962 Chevrolet K10. Popular Anchor parts include:
FAQs for 1962 Chevrolet K10 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1962 Chevrolet K10?
Out of 27 Drive Shafts and Axles for the 1962 Chevrolet K10, the most popular in our inventory are:
from
$13.49
This product is not rated
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
from
$6.99
This product is not rated
Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub)
Axle Shaft Snap Rings
