1962 Chevrolet Corvette Exhaust Parts
More 1962 Chevrolet Corvette Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1962 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1962 Chevrolet Corvette Exhaust Parts
Walker – Donut Exhaust Pipe Flange Gasket: Iron, Heat Resistant, Premium Materials (Part No.31416)
from
$6.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.60986)
from
$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$436.99
LS Cast Iron Exhaust Manifold
Patriot Exhaust – H8025-1 1 5/8" Tri-5 Header Chevrolet Passenger Car/Wagon Small Block Chevrolet 55-57 Coated (Part No.H8025-1)
from
$571.99
Our popular 55-57 Chevy Passenger Car Headers for small orbig block and LS1 / LS6 swaps offer superior performance andfit. These headers accommodate the GM 605 power steeringbox conversion and fit most motor mounts. Check footnotes forrack and pinion
Product Features:
See More
Product Features:
- Patriot Exhaust H8025-1 1 5/8″ Tri-5 Header Chevrolet Passenger Car/Wagon Small Block Chevrolet 55-57 Coated
- Our popular 55-57 Chevy passenger car headers for small or big block and LS1 / LS6 swaps.
Hooker Headers – Street Force; Emissions Compatible Header (Part No.2061HKR)
from
$737.99
Hooker Street Force Headers are designed to be a high performance alternative to the stock O.E. manifolds. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Borla Performance Exhaust – T-304 Stainless Steel, 2-1/2 Inch Diameter, Without Converters, X-Pipe (Part No.60087)
from
$462.99
This performance X-Pipe creates power while adding a great sound systems. In testing, customers and racers alike noticed the power increase you’ve come to expect from Borla (R), and all commented on the great exhaust tone being emitted. This sophisticated component is a perfect compliment to the famous Borla (R) Cat-Back (TM) systems and is even lighter than the stock system, mainly due to the premium, high-quality T-304 austenitic lightweight stainless steel used in every Borla (R) exhaust component. Additional attributes include an extremely simple, bolt-in replacement for the factory mid-pipe that further enhances that famous Borla (R) growl of power. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. While many exhaust companies talk about racing, Borla (R) mufflers, headers and other exhaust components are tested every single weekend on race tracks around the world. The Borla (R) success is unmatched, and that effort transfers to the Borla (R) street systems.
Product Features:
See More
Product Features:
- Premium, High-Quality T-304 Austenitic Lightweight Stainless Steel Used In Exhaust Component
- This Performance X-Pipe And Connection Pipes Create Power While Adding A Great Sound
- Lighter Than The Stock System
- Great Exhaust Tone Being Emitted
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$75.99
HEADER FLT BLOCK HUGGER
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 0.75"L, Hex Head, Natural, Ss, Set Of 16 (Part No.400-1102)
from
$40.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 1"L, 12Point Head, Natural, Ss, Set Of 16 (Part No.400-1212)
from
$56.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Mahle – Exhaust Manifold Gasket Set (Part No.A8112353763MAH)
from
$15.90
MAHLE Cleveite Inc. is not responsible for failures resulting from owner, operator or third party abuse or neglect including, but not limited to engine operation without adequate lubricant or coolant, over or under-fuelling, over-speeding, lack of proper maintenance to cooling, lubrication or air intake systems, improper storage, starting, warm-up, run-in or shutdown procedures or the continued operation of an engine after the first sign of a malfunction. MAHLE Cleveite Inc. is not responsible for failures resulting from improper installation or repair procedures, alteration or the misapplication of parts, or use in engines modified for competition or levels of performance beyond the engine manufacturers original specifications. Mahle/Cleveite – (The MAHLE Group) is one of the largest global automotive parts manufacturers, specializing in Engine Components, Filtration and Peripherals.
See More
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66013)
from
$48.99
Seal-4-Good Header Flange Gasket
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66031)
from
$48.99
Seal-4-Good Header Flange Gasket
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66086)
from
$48.99
Seal-4-Good Header Flange Gasket
Dorman – Brass Hex Nut – 3/8-16 In. (sold by each) (Part No.680-104)
from
$2.49
This exhaust manifold nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brass Hex Nut – 3/8-16 In. (Part No.680-104CD)
from
$9.99
This exhaust manifold nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – ARP Header Bolt Kit (Part No.100-1402)
from
$69.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.
Product Features:
See More
Product Features:
- 3/8″-16 Thread Size(s)
- Steel
- Black Oxide
- Small Block Chevy
- 12-Point Head
- Set of 12
- 1.670″ Overall Length
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Popular 1962 Chevrolet Corvette Exhaust Parts Categories
1962 Chevrolet Corvette Exhaust Parts
You count on your 1962 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 50 Exhaust Parts ranging in price from $2.29 to $668.99, you’re sure to find everything you need for your 1962 Chevrolet Corvette.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Felpro, Mr. Gasket, and Remflex. 1962 Chevrolet Corvette Exhaust Parts start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 126 extensive product reviews on 1962 Chevrolet Corvette Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Terminator; Exhaust Tips with 4.0 stars and Direct Fit Exhaust Manifold: Without Heat Shield with 4.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1962 Chevrolet Corvette below to get started!
Top-Rated Exhaust Parts Brands For Your 1962 Chevrolet Corvette
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Felpro, Mr. Gasket, Remflex, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1962 Chevrolet Corvette back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1962 Chevrolet Corvette, and some of our most reviewed parts include:
FAQs for 1962 Chevrolet Corvette Exhaust Parts
What are the most purchased Exhaust Parts for the 1962 Chevrolet Corvette?
Out of 50 Exhaust Parts for the 1962 Chevrolet Corvette, the most popular in our inventory are:
from
$42.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Exhaust Manifold Gaskets
from
$27.49
(4)
Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing
Exhaust Manifold Gaskets
What are the top-rated 1962 Chevrolet Corvette Exhaust Parts?
Top-rated Exhaust Parts for your 1962 Chevrolet Corvette based on customer reviews/ratings are:
from
$106.99
(1)
Direct Fit Exhaust Manifold: Without Heat Shield
“I am restoring a 1963 Impala SS….327 4 speed…these manifolds will increase horsepower and give me the look I am looking for without spending $400!”
from
$75.99
(1)
HEADER FLT BLOCK HUGGER
“OK..THE FLANGE SIZE IS IMPORTANT INFO..BUBLEHEAD COULDNT TELL ME THIS INFO..DEAL BREAKER..WHY CANT AMERICAS PARTS PEOPLE ANSWER THE SIMPLE QUESTIONS A”
