1962 Chevrolet C50 Brake Parts

Essential 1962 Chevrolet C50 Brake Parts

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-8000)

Remanufactured Brake Master Cylinder

from

$116.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-34405)

Remanufactured Brake Master Cylinder

from

$105.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-34404)

Remanufactured Brake Master Cylinder

from

$49.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-57579)

Remanufactured Brake Master Cylinder

from

$77.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1.5" Bore (Part No.MCA36229)

New Brake Master Cylinder: With Reservoir, Exact Fit, 1.5" Bore

from

$95.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Wearever – Master Cylinder (Part No.10-57597)

Master Cylinder

from

$44.49
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-36366)

Remanufactured Brake Master Cylinder

from

$91.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – BRAKE MASTER CYL NEW (Part No.MCA39457)

BRAKE MASTER CYL NEW

from

$212.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1.75" Bore (Part No.MCA12430)

New Brake Master Cylinder: With Reservoir, Exact Fit, 1.75" Bore

from

$432.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

1962 Chevrolet C50 Brake Parts

You count on your 1962 Chevrolet C50 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 3 Brake Parts ranging in price from $15.99 to $105.99, you’re sure to find everything you need for your 1962 Chevrolet C50.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 2 different brands like Cardone and Wearever. 1962 Chevrolet C50 Brake Parts start as low as $15.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 40 extensive product reviews on 1962 Chevrolet C50 Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1962 Chevrolet C50 below to get started!

Top-Rated Brake Parts Brands For Your 1962 Chevrolet C50

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Chevrolet C50 running right for years to come. In our inventory you’ll find brands like Cardone Wearever, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1962 Chevrolet C50 back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1962 Chevrolet C50 Brake Parts

What are the most purchased Brake Parts for the 1962 Chevrolet C50?

Out of 3 Brake Parts for the 1962 Chevrolet C50, the most popular in our inventory are:
Remanufactured Brake Master Cylinder
from $49.99
This product is not rated
Remanufactured Brake Master Cylinder
Brake Master Cylinders
Remanufactured Brake Master Cylinder
from $105.99
This product is not rated
Remanufactured Brake Master Cylinder
Brake Master Cylinders