1962 Chevrolet Biscayne Suspension Parts
More 1962 Chevrolet Biscayne Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1962 Chevrolet Biscayne, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1962 Chevrolet Biscayne Suspension Parts
MOOG – Control Arm Bumper (Part No.K6606)
from
$16.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
KAI – Control Arm Bumper (Part No.GMK4041972582)
from
$10.99
New Goodmark Front Upper Control Arm Bumper, Use 2
Product Features:
See More
Product Features:
- Use 2
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
MOOG – Coil Spring Set (Part No.6084)
from
$129.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.6033)
from
$178.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
MOOG – Coil Spring Insulator (Part No.K6203-2)
from
$5.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Rare Parts – Control Arm Bush (Part No.RP15801)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
MOOG – Control Arm Bushing (Part No.K6075)
from
$33.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metro Mould – Shock Absorber Bushing (Part No.BN 11)
from
$12.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Shock Absorber Grommet. 1 In. bottom O.D. 3/4 In. high, with 5/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KYB – Gas Shock (Part No.343130)
from
$53.99
Product Features:
See More
- Recommended OEM replacement shock for classic, domestic cars
- Specifically calibrated to help restore original handling and control characteristics
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Lakewood – Drag Shock-50/50:GM (Part No.40300)
from
$91.99
Drag Shock-50/50:GM
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5766)
from
$35.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rare Parts – Control Arm Shaft Kit (Part No.RP15354)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Rare Parts – Control Arm Shaft Kit (Part No.RP15364)
from
$163.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
MOOG – Control Arm Shaft Kit (Part No.K6104)
from
$51.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
KYB – Gas Shock (Part No.344081)
from
$68.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Shock For Domestic Vehicles
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)
from
$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5765)
from
$35.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KYB – Gas Shock (Part No.343128)
from
$54.99
Product Features:
See More
- Recommended OEM replacement shock for classic, domestic cars
- Specifically calibrated to help restore the original handling and control characteristics of the Ford Focus
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)
from
$99.19
Drag Shock-90/10:Ford/GM/Mopar
KYB – High Pressure Monotube Gas Shock (Part No.KG4515)
from
$72.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5458)
from
$92.99
Product Features:
See More
- Adds up to 25% more damping performance over original equipment shocks
- Vehicle specific components and valving
- High gas pressure design provides instant, extra control
- Monotube design outperforms all other standard shock absorbers
- Unique, air-free, hydraulic unit eliminates performance fade
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)
from
$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Popular 1962 Chevrolet Biscayne Suspension Parts Categories
1962 Chevrolet Biscayne Suspension Parts
You count on your 1962 Chevrolet Biscayne to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 24 Suspension Parts ranging in price from $10.99 to $178.99, you’re sure to find everything you need for your 1962 Chevrolet Biscayne.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 10 different brands like Valvoline, Moog, and Monroe. 1962 Chevrolet Biscayne Suspension Parts start as low as $10.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 232 extensive product reviews on 1962 Chevrolet Biscayne Suspension Parts. Some of the top-rated Suspension Parts products we carry are Drag Shock-70/30:GM (Rear) with 5.0 stars and High Pressure Monotube Gas Shock with 3.0 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1962 Chevrolet Biscayne below to get started!
Top-Rated Suspension Parts Brands For Your 1962 Chevrolet Biscayne
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Chevrolet Biscayne running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Monroe, and even more.
Popular Driveworks Suspension Parts
You’ll find popular Driveworks brand products across Control Arms. All are waiting to get your 1962 Chevrolet Biscayne back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1962 Chevrolet Biscayne, and some of our most reviewed Monroe parts include:
FAQs for 1962 Chevrolet Biscayne Suspension Parts
What are the most purchased Suspension Parts for the 1962 Chevrolet Biscayne?
Out of 24 Suspension Parts for the 1962 Chevrolet Biscayne, the most popular in our inventory are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 1962 Chevrolet Biscayne Suspension Parts?
Top-rated Suspension Parts for your 1962 Chevrolet Biscayne based on customer reviews/ratings are:
from
$104.99
(1)
Drag Shock-70/30:GM (Rear)
“I installed these on my 1966 chevelle.they were easy to in stall and they look and perform great.”
from
$83.99
(1)
High Pressure Monotube Gas Shock
“Will be installed on `57 Chevy restoration within the next 3 months. Shocks have great reputation as replacement / performance in the collector/restor”
