1961 Pontiac Bonneville Performance and Racing Products
Find Your Specific 1961 Pontiac Bonneville Performance and Racing Products
Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1961 Bonneville. Advance Auto Parts has popular Bonneville parts like Performance Ignition Products, Performance Fuel Systems, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Bonneville model years including
1997,
1998,
1999,
2000,
2001,
2002,
2003,
2004,
2005 and more. Select a category of 1961 Pontiac Bonneville Performance and Racing Products below and start saving instantly.
Popular 1961 Pontiac Bonneville Performance and Racing Products Categories
Essential Performance and Racing Products for 1961 Pontiac Bonnevilles
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)
from
$334.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Mallory – Distributor Condenser (Part No.401)
from
$17.09
Distributor Condenser
Mallory – Mallory Unilite Dist.: Pontiac 301-455 (Part No.3758001)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1016)
from
$67.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum (Part No.4145)
from
$371.99
The Edelbrock #4145 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Small Block Chevy 262-400 1959-86
- Tall
- Polished Aluminum
- Set Of Two
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1623)
from
$23.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Edelbrock – CARBURETOR (Part No.14054)
from
$488.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
MSD Ignition – Distributor Cap and Rotor; GM 4.3L; External Coil (Part No.8430)
from
$48.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/performance in mind
- High quality; voltage insulating material
- Stainless Terminals
- High dielectric properties
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)
from
$18.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)
from
$63.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)
from
$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.
Product Features:
See More
Product Features:
- They Are Zinc Dichromate Plated Steel
- They Have Black Oxide Coated Set Screws
- Keeps Rocker Arms Positively Locked
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Includes Locks and Hex Wrench
- Shank O.D. .603″
Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)
from
$213.99
These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed
Product Features:
See More
Product Features:
- Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
- For applications with less than 350 lbs. of open spring pressure
- Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
- Ultimate street roller rocker arm designed for serious performance enthusiasts
Mr. Gasket – Bolt Water Pump (Part No.4998)
from
$32.99
This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.
Product Features:
See More
Product Features:
- Chrome Plated
- Grade 5
- AN washers with no exposed shoulder for a professional appearance
Weiand – Action Plus Water Pumps (Part No.9240P)
from
$215.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.
Product Features:
See More
Product Features:
- Twisted Snout Water Pump Design For Updated Style
- Street Performance
- Heavy Duty Shaft w/5/8 in. Pilot
- Six-Blade Stamped Steel
- Anti-Cavitation Impeller
- 100 Percent Leak Tested
Spectre – Oil Pan (Part No.5482)
from
$129.99
This Spectre Oil Pan was designed for the small block Chevys 1986 and up with 305-350 engines, a passenger side dipstick and 1-piece rear main seal. This triple chrome plated oil pan is an oem replacement oil pan.
Product Features:
See More
Product Features:
- Triple chrome-plated
- Steel construction
- Stock capacity
- Made from high quality material
Mr. Gasket – Oil Pan Bolt Kit (Part No.6086)
from
$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)
from
$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s
Product Features:
See More
Product Features:
- Ratchet Action Shifter
- Cable Operated
- Quick Installation
- Accurate Shifting
- Reverse Lockout Feature
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$479.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Upgrade your 1961 Pontiac Bonneville with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1961 Pontiac Bonneville, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Bonneville functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Performance and Racing Products for the 1961 Pontiac Bonneville, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1961 Pontiac Bonneville at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $10.99 to $622.99, with
an average price of $199.43.
Our 40 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1961 Pontiac Bonneville without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1961 Pontiac Bonneville, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Accel, Edelbrock, Mr. Gasket, and more.
Accel Performance and Racing Products
start at just $42.49 and boast an impressive 4 stars average rating from customers.
Edelbrock and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $25.99, and at an average 4 stars rating.
With 7,257 customer reviews and counting, our 1961 Pontiac Bonneville Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1961 Pontiac Bonneville is always ready to roll. We’re committed to providing you with everything you need to keep your Bonneville in top shape, all in one place.
Start shopping confidently below for your 1961 Pontiac Bonneville!
Best-Selling Performance Ignition Products for 1961 Pontiac Bonnevilles
Enhance the driving experience in your Pontiac with 9 quality Performance Ignition Product components, starting at $17.09.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$176.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Condenser (Part No.401)
from
$17.09
Distributor Condenser
Most Popular 1961 Pontiac Bonneville Performance Fuel Systems
Customize your Pontiac with 8 Performance Fuel Systems products
like Performance Carburetors, all
priced under $541.99.
Edelbrock – CARBURETOR (Part No.14054)
from
$488.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)
from
$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$498.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Edelbrock – CARBURETOR (Part No.14064)
from
$541.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Electric Choke Installed from Factory
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)
from
$413.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Aluminum Body Material
- Manual Choke Type
- 800 cfm Maximum Flow Rating
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Top Picks for 1961 Pontiac Bonneville Performance Engines
Upgrade Pontiac Bonnevilles with top-quality Performance Engines parts, including 12 OEM and aftermarket selections for your 1961 model.
Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)
from
$385.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.50 in. Block To Hub Height
- Black Finish
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (Part No.2157)
from
$358.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Cylinder Head Gasket Set for Pontiac (Part No.7381)
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1622)
from
$32.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)
from
$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.
Product Features:
See More
Product Features:
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Shank O.D. .540″
- Includes Locks and Hex Wrench
- High-Quality Grade Steel
- Heat-Treated For Ex Strength
- Plated With Durable Gold Tone Finish
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1016)
from
$67.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit (Part No.K51-230-3)
from
$622.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Pontiac (Part No.7382)
from
$118.99
Product Features:
See More
- Head: 4.300″ Bore/0.038″ Thick/8.96cc Vol.
- Intake: 1.18″x2.20″ Port/.060″ Thick
- Exhaust: 1.880″ Port
- 3/16″ Valve Cover
- Multi Piece Configuration
Edelbrock – Valve Cover Gasket Set for Pontiac (Part No.7590)
from
$34.99
Product Features:
See More
- 0.1875 in. Thickness
- Core-Reinforced-Composite Material
- For 326-455 Pontiac Engines
- Set of 2
- Made In The USA
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1623)
from
$23.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
In-Demand Performance Distributors for 1961 Pontiac Bonnevilles
Select from 5 premium Performance Distributors parts for your 1961 Pontiac Bonneville, with prices ranging from $10.99 to $538.99.
Accel – Distributor Cap And Rotor Kit (Part No.8124)
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Mallory – Mallory Unilite Dist.: Pontiac 301-455 (Part No.3758001)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Most Sold 1961 Pontiac Bonneville Performance Exhaust Products
Explore our best-selling Pontiac parts for the 1961 Bonneville among 1 OEM and aftermarket options starting from $25.99.
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Top-Rated Performance and Racing Products Brands For Your 1961 Pontiac Bonneville
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1961 Pontiac Bonnevilles. Below you’ll find some of our best rated Performance and Racing Products from Accel, Edelbrock, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1961 Bonneville start at just $25.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Accel 1961 Pontiac Bonneville Performance and Racing Products
When it comes to maintaining or upgrading your 1961 Pontiac Bonneville, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1961 Pontiac Bonneville. With over 3 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $42.49, with an average price of just $65.66. Plus, with over 55 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$42.49
$42.49
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
“Hot spark”
Popular Edelbrock 1961 Pontiac Bonneville Performance and Racing Products
Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1961 Pontiac Bonneville owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1961 Bonneville, Advance Auto Parts carries a full inventory of 13 Edelbrock Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $34.99 to $541.99, plus, with more than 76 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$498.99
$498.99
This product is not rated
Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“”
FAQs for 1961 Pontiac Bonneville Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1961 Pontiac Bonnevilles?
Out of 40 Performance and Racing Products that fit 1961 Pontiac Bonnevilles, the following parts are the top sellers:
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $42.49
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
- Alternator Bracket (6124151) – $25.99
What’s the price range for 1961 Pontiac Bonneville Performance and Racing Products?
Performance and Racing Product prices for the 1961 Pontiac Bonneville start at $10.99 and go up to $622.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1961 Pontiac Bonneville?
The average price for Performance and Racing Products for the 1961 Pontiac Bonneville is $199.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Bonneville model years?
What are the cheapest Performance and Racing Products for my 1961 Pontiac Bonneville?
The cheapest 1961 Pontiac Bonneville Performance and Racing Products we carry in stock are:
- D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $10.99
- D4061 Flame-Thrower HEI Distributor Rotor Red (10111583) – $15.99
- D4062 Flame-Thrower HEI Distributor Rotor Blue (10111488) – $15.99
- Distributor Condenser (17350019) – $17.09
- Performance Valve Cover Gasket Set (19781562) – $23.29
What are the top-rated Performance and Racing Products that fit the 1961 Pontiac Bonneville?
Out of 7,257 reviews by customers, our 1961 Pontiac Bonneville Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1961 Pontiac Bonneville and their top-rated products:
- Performance Exhaust Products
- Alternator Bracket (6124151) – $25.99
- Performance Fuel Systems
- Alternator Bracket (6124151) – $25.99
- Performance Distributors
- Alternator Bracket (6124151) – $25.99
What types of Performance and Racing Products do you sell for my 1961 Pontiac Bonneville?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1961 Pontiac Bonneville:
Can I get help with 1961 Pontiac Bonneville Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.
What is your return policy for Pontiac Bonneville Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Pontiac Bonneville Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
