1961 Jeep DJ3 Brake Parts
More 1961 Jeep DJ3 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1961 Jeep DJ3, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1961 Jeep DJ3 Brake Parts
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA84517)
from
$25.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA381242)
from
$23.79
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Rugged Ridge – Brake Hose (Part No.16735.01)
from
$56.99
Rugged Ridge Braided Stainless Steel Brakes Hoses feature a tuff stainless steel braided outer cover with a Teflon inner hose, withstanding trail hazards better than OE. They provide up to 4 inch of additional length over OE hoses, a must for any lifted v
Product Features:
See More
Product Features:
- Stainless Steel
- Corrosion Resistant
- Each
- Improved Performance
- Limited 5 Year Warranty
Carquest Wearever – Brake Master Cylinder MCA2796: New, With Reservoir (Part No.MCA2796)
from
$165.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Wearever – Remanufactured Brake Master Cylinder (Part No.10-57585)
from
$71.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Popular 1961 Jeep DJ3 Brake Parts Categories
1961 Jeep DJ3 Brake Parts
You count on your 1961 Jeep DJ3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 3 Brake Parts ranging in price from $25.99 to $165.99, you’re sure to find everything you need for your 1961 Jeep DJ3.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 2 different brands like Carquest and Rugged Ridge. 1961 Jeep DJ3 Brake Parts start as low as $25.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1961 Jeep DJ3 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1961 Jeep DJ3 below to get started!
Top-Rated Brake Parts Brands For Your 1961 Jeep DJ3
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1961 Jeep DJ3 running right for years to come. In our inventory you’ll find brands like Carquest Rugged Ridge, and even more.
Popular Carquest Wearever Brake Parts
You’ll find popular Carquest Wearever brand products across Brake Master Cylinders and Brake Hoses. All are waiting to get your 1961 Jeep DJ3 back on the road. Some of the top-rated Carquest Wearever products in these categories are:
