1961 Ford F-100 Pickup Drive Shafts and Axles

More 1961 Ford F-100 Pickup Drive Shafts and Axles

Find your specific 1961 Ford F-100 Pickup original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1961 Ford F-100 Pickup Drive Shafts and Axles

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

(1 reviews)
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

(13 reviews)
View Product

National – Bearings (Part No.207-L)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(25 reviews)
View Product

National – Multi Purpose Bearing (Part No.HB-88508-A)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(17 reviews)
View Product

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Fill Plug For Ford 9", 1/2" Thread

from

$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fill plug
  • Fits Ford 9″
See More
View Product

Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)

Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford

from

$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:
  • Adapter washer
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More
View Product

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More
View Product

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

(1 reviews)
View Product

Spicer – Universal Joint (Part No.5-760X)

Universal Joint

from

$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(7 reviews)
View Product

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(12 reviews)
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More
View Product

Yukon Gear – Axle Bearing For 9" Ford, 3.150" O.D. (Part No.10062)

Axle Bearing For 9" Ford, 3.150" O.D.

from

$128.99
F9″ Large sealed able bearing , ID = 1.562″ OD = 3.150″ w/Outer O-ring (no Inner seal required) . This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing for Ford 9″
  • Sealed design
  • 3.150″ O.D.
  • 1.562″ I.D.
  • Services one side
See More
View Product

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$92.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

Driveworks – Axle Shaft Seal (Part No.S-710043)

Axle Shaft Seal

from

$10.99
Product Features:
  • Brand may vary by location
See More
View Product

Driveworks – Oil Seal (Part No.S-2146)

Oil Seal

from

$4.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

(4 reviews)
View Product

Yukon Gear – Outer Axle Seal To Be Used With Set10 Bearing (Part No.30218)

Outer Axle Seal To Be Used With Set10 Bearing

from

$19.99
Outer axle seal to be used with set10 bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • For use with Set10 bearing
See More
View Product

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$32.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More
View Product

Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)

Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes

from

$22.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits large and small bearing applications
  • 3/8″ bolt holes
  • 3 9/16″ x 2″ bolt pattern
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)

Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X

from

$17.99
Product Features:
  • Bearing retainer
  • Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
See More
View Product

Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)

Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes

from

$67.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits large bearing applications
  • 1/2″ bolt holes
  • 3 1/2″ x 2 3/8″ bolt pattern
See More
View Product

Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)

Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes

from

$22.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits small bearing applications
  • 3/8″ bolt holes
  • 3 5/16″ x 2″ bolt pattern
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear (Part No.33542)

Axle Bearing Retainer For Dana 44 Rear

from

$30.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 with Set 10 bearing
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)

Axle Bearing Retainer Plate For Dana 44 TJ Rear

from

$19.99
Product Features:
  • Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
  • 3/8″ bolt holes
  • 1 5/8öx3 3/16ö bolt pattern
See More
View Product

1961 Ford F-100 Pickup Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1961 Ford F-100 Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 21 different Drive Shafts and Axles in our inventory ranging from $5.99 to $883.99. That means you can find the exact parts or products you need to keep that 1961 Ford F-100 Pickup running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Ford F-100 Pickup. National, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1961 Ford F-100 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1961 Ford F-100 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1961 Ford F-100 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Ford F-100 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your F-100 Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1961 Ford F-100 Pickup, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints

Top 1961 Ford F-100 Pickup Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1961 Ford F-100 Pickup. Popular National parts include:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports

FAQs for 1961 Ford F-100 Pickup Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1961 Ford F-100 Pickup?

Out of 21 Drive Shafts and Axles for the 1961 Ford F-100 Pickup, the most popular in our inventory are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Center Support Bearing Motor Mount: Center, 1 Piece
from $34.49
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Ford 7.5", 8", 8.8", & 9" Axle Stud
from $6.99
This product is not rated
Ford 7.5", 8", 8.8", & 9" Axle Stud
Axle Shaft Studs

More Popular Parts for All Makes