1961 Chevrolet K10 Differentials

Essential 1961 Chevrolet K10 Differentials

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Yukon Gear – Bearing Install Kit For GM 8.5" HD Front Differential (Part No.11070)

Bearing Install Kit For GM 8.5" HD Front Differential

from

$271.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ front with aftermarket positraction
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – Mini Spool For GM 8.5" With 30 Spline Axles (Part No.32233)

Mini Spool For GM 8.5" With 30 Spline Axles

from

$188.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ with 30 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Minor Install Kit For GM 12 Bolt Truck Differential (Part No.12044)

Minor Install Kit For GM 12 Bolt Truck Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:
  • Fits GM 12 bolt truck
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Front Differential (Part No.13070)

Pinion Install Kit For GM 8.5" Front Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ front
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)

Spartan Locker Replacement Cross Pin For Dana 44

from

$46.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Dana Spicer 44
  • Works with Spartan Locker or standard open spider gears
See More

Mr. Gasket – Differential Gasket (Part No.84B)

Differential Gasket

from

$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

from

$28.99
Positraction cross pin bolt for GM 12P and 12T.

Product Features:
  • Cross pin bolt for GM 12 bolt passenger car and truck
  • For OEM positraction applications only
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 12 Bolt Truck (Part No.55046)

Crush Sleeve Eliminator Kit For GM 12 Bolt Truck

from

$47.99
12T solid crush sleeve replacement spacer, pinion preload.

Product Features:
  • Crush sleeve eliminator kit for GM 12 bolt truck
See More

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

    Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

    from

    $41.99
    Product Features:
    • Shim kit
    • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
    See More

    Motive Gear – Differential Pinion Nut (Part No.3752901)

    Differential Pinion Nut

    from

    $7.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Motive Gear – Axle Shaft (Part No.14039547)

    Axle Shaft

    from

    $137.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • AXLE SHAFT 8.5 4X4 28 SPL 6 LUG 31 1/2 OA EARLY 88 DOWN
    See More

    Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.34020)

    Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up

    from

    $1302.99
    The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

    Product Features:
    • Fits Dana Spicer 44 with 30 spline axles
    • 3.92 and up ratio only
    • Forged case and 8620 internals for added strength
    • Works with a variety of air delivery systems
    • Assembled in the USA
    See More

    Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

    Differential Yoke including Seal and Pinion Nut

    from

    $139.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

    8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

    from

    $10.99
    8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

    Product Features:
    • Pinion gear thrust washer for GM 8.5″ and 8.6″
    • Fits standard open differentials only
    • 0.795″ I.D.
    See More

    Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

    Air Line Repair Kit, Zip Locker

    from

    $52.99
    Air line repair kit, ZIP locker.

    Product Features:
    • Air line repair kit
    • Includes 20′ air line and two repair fittings
    See More

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Motive Gear – Axle Shaft (Part No.GM10FAXR)

    Axle Shaft

    from

    $207.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • GM 10BL 8.5 AXLE RIGHT SIDE, 77-87 1/2 & 3/4 TON
    See More

    Driveworks – Oil Seal (Part No.S-471424)

    Oil Seal

    from

    $4.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

    Replacement Clutch Set For Dana 44 Powr Lok, Aggressive

    from

    $232.99
    Product Features:
    • Clutch kit
    • Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
    • Aggressive design
    See More

    Popular 1961 Chevrolet K10 Differentials Categories

    1961 Chevrolet K10 Differentials

    Maybe you’re in the middle of a full rebuild of that 1961 Chevrolet K10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 190 different Differentials in our inventory ranging from $3.99 to $1,302.99. That means you can find the exact parts or products you need to keep that 1961 Chevrolet K10 running smoothly.

    Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Chevrolet K10. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1961 Chevrolet K10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 473 reviews in this category, some of the top rated parts include Oil Seal with 4.3 stars and Taper Bearing Cone with 3.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1961 Chevrolet K10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1961 Chevrolet K10 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Chevrolet K10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1961 Chevrolet K10 Differentials

    What are the most purchased Differentials for the 1961 Chevrolet K10?

    Out of 190 Differentials for the 1961 Chevrolet K10, the most popular in our inventory are:
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Axle Housing Cover Gasket
    from $6.49
    (10)
    Axle Housing Cover Gasket
    Rear Housing Cover Gaskets
    Bearings
    from $9.99
    (8)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1961 Chevrolet K10 Differentials?

    Top-rated Differentials for your 1961 Chevrolet K10 based on customer reviews/ratings are:
    Oil Seal
    from $10.49
    (3)
    Oil Seal
    “Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”
    Taper Bearing Cone
    from $17.99
    (2)
    Taper Bearing Cone
    “good deal”
    Shaft Repair Sleeve
    from $37.99
    (1)
    Shaft Repair Sleeve
    “Very delicate piece, but came shipped quite safely and not damaged. High quality.”