1961 Chevrolet C20 Pickup Air Intakes

Name: Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs
Brand: Edelbrock
SKU: 12624
Price: 13.99 USD

Below you will find various in-demand Chevrolet Air Intakes, components and accessories for your 1961 C20 Pickup. Advance Auto Parts has popular C20 Pickup parts like Carburetor Kits, Carburetor Parts, Air Cleaner Parts and more. You’ll also find aftermarket and OEM Air Intakes for other C20 Pickup model years including 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 and more. Select a category of 1961 Chevrolet C20 Pickup Air Intakes below and start saving instantly.

Popular 1961 Chevrolet C20 Pickup Air Intakes Categories

Intake Manifolds

Carburetors

Intake Manifold Gasket Sets

Intake Manifold Bolt Sets

Carburetor and Injector Seal Kits

Carburetor Accelerator Pump Diaphragms

Air Cleaner Mount Gaskets

Intake Manifold Expansion Plugs

Carburetor and Injector Mount Gaskets

Carburetor Power Valves

Carburetor Needle and Seats

Carburetor Metering Jets

Carburetor Secondary Diaphragms

Carburetor Gasket Kit

Carburetor Transfer Tube O-Ring

Carburetor Needle and Seat Hardware Kit

Engine Intake Manifold Installation Kit

Essential Air Intakes for 1961 Chevrolet C20 Pickups

from

$13.99

The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:

Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
Includes Gasket
1/2 in. x 28 Power Valve Thread
For Applications That Prefer To Run Carbs Without The Power Valves
Made In The USA

from

$18.99

Product Features:

The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.

from

$22.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$14.99

The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

57 Maximum Jet Size
0.056 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$429.99

Product Features:

High Rise/Dual Plane Design For Maximum Torque
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability
Permanent Mold Casting Process
Lighter/Smoother/Better Looking
More Consistent Castings

from

$1865.99

Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Convert From Single To Dual-Quad Intake
Produces Incredible Top-End Horsepower
Edelbrock Total Power Package Maximizes Gains

from

$80.99

Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:

Nominally Rated At 170,000 Psi Tensile Strength
Precision Machined Threads For Secure Engagement, And Would not Rust
Wide Under Head Flange And Companion Washers Provide Even Load Distribution
Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
Facilitates Optimum Sealing Of Gasket Surfaces

from

$60.99

Nominally Rated At 170,000 PSI Tensile Strength
Precision Machined Threads For Secure Engagement, And Would not Rust
Wide Under Head Flange And Companion Washers Provide Even Load Distribution
Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
Facilitates Optimum Sealing Of Gasket Surfaces

from

$5.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$1.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$599.99

Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 adjustable float carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they’re available in your choice of universal or direct fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!

Product Features:

Universal Holley 4-Barrel Carburetor

from

$237.99

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

from

$18.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$27.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$5.99

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Manufactured from high quality materials for a long service life
Torque values listed on parts (where applicable)
Easy to install
Constructed to strict engineering quality standards

from

$26.99

The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Product Features:

Steel Material
For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
Includes Lightest To Heavy
Set of 7
Made in The USA

from

$14.99

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

from

$20.99

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block, Fuel Bowl Type
Set of 4
Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
Made In The USA

from

$20.99

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block Type
Set of 4
Fits Holley® 4160 Carburetors
Made In The USA

from

$4.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.49

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$299.99

Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i

from

$13.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Upgrade your 1961 Chevrolet C20 Pickup with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1961 Chevrolet C20 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your C20 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 136 Air Intakes for the 1961 Chevrolet C20 Pickup, designed to meet your needs without breaking the bank. From Carburetor Kit replacements to Carburetor Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1961 Chevrolet C20 Pickup at great prices. Our Air Intakes inventory for this model ranges from just $1.99 to $2,075.99, with an average price of $563.33. Our 136 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 1961 Chevrolet C20 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1961 Chevrolet C20 Pickup, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, Edelbrock, Holley, and more. FELPRO Air Intakes start at just $2.49 and boast an impressive 4.6 stars average rating from customers. Edelbrock and Holley also bring quality to the table, with Air Intakes available starting at $13.99, and at an average 4.4 stars rating. With 137 customer reviews and counting, our 1961 Chevrolet C20 Pickup Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1961 Chevrolet C20 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your C20 Pickup in top shape, all in one place. Start shopping confidently below for your 1961 Chevrolet C20 Pickup!

Best-Selling Carburetor Kits for 1961 Chevrolet C20 Pickups

Enhance the driving experience in your Chevrolet with 6 quality Carburetor Kit components, starting at $20.99.

show more show less

from

$47.99

Product Features:

The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
The kit comes with the necessary components to rebuild a 4160 style Carburetor.

from

$60.99

Product Features:

The Edelbrock #12760 4150 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
The kit comes with the necessary components to rebuild a 4150 style Carburetor.

from

$35.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$27.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$20.99

Nitrile Rubber Material
Metering Block Type
Set of 4
Fits Holley® 4160 Carburetors
Made In The USA

from

$20.99

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block, Fuel Bowl Type
Set of 4
Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
Made In The USA

Most Popular 1961 Chevrolet C20 Pickup Carburetor Parts

Customize your Chevrolet with 93 Carburetor Parts products like Carburetors, Carburetor and Injector Mount Gaskets, and Carburetor Accelerator Pump Diaphragms, all priced under $1,949.99.

show more show less

from

$13.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

from

$799.99

The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Optimized Street/Strip Calibration That Works Out Of The Box
Man. Choke Cable Hand Controlled For Cold Start Control
Mechanical Secondaries For Awesome Tire Turning Performance
Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
100% Wet Flow Tested By Holley Technicians

from

$428.99

The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$394.99

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$474.99

The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$599.99

Universal Holley 4-Barrel Carburetor

from

$524.99

One of the most widely used Holley carbs of all times -the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.

Product Features:

Vibratory Polished For Good Looks

from

$849.99

Classic Holley carbs have been a staple for rodders around the world for decades. They’re calibrated for use on stock to mildly modified vehicles and have that classic Holley look. Holley’s 0-8007 is calibrated and intended for small V8s or 6 cylinder engines as well as 2×4 street tunnel ram style set ups. Plus, it is Gold Dichromate coated for durability and classic Holley looks. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Factory Preset Elec Choke For Easy Startups
For All Weights/Gearing/Trans For Smooth Open Of Secondaries
Single Feed Fuel Inlet For Easy Installation
Power Valve Blow-Out Protection
Does Not Work w/A.O.D. Transmissions
Installation/Tuning DVD Incl.

from

$671.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Manual Choke For Precise Cold Start Control
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$631.99

The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Performance Upgrade For Stock To Mildly Modified Vehicles
Universal calibration for easy bolt-on performance
Man. Choke Cable Hand Controlled For Cold Start Control
Vacuum Secondaries For Use On Wide Variety Of Vehicles
Dual feed fuel inlets for constant high volume fuel delivery
Power Valve Blow Out Protection
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$437.99

The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

from

$480.99

Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
Performance Upgrade For Stock To Mildly Modified Vehicles
Universal Calibration For Easy Bolt-On Performance
Man. Choke Cable Hand Controlled For Cold Start Control
Vacuum Secondaries For Use On Wide Variety Of Vehicles
Single Feed Fuel Inlet For Easy Installation

from

$16.99

Product Features:

The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
Kit includes two black nitrile fuel bowl gaskets.

from

$1.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$17.99

Product Features:

The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

from

$599.99

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Performance Upgrade For Stock To Mildly Modified Vehicles
Universal Calibration For Easy Bolt-On Performance
Man. Choke Cable Hand Controlled For Cold Start Control
Vacuum Secondaries For Use On Wide Variety Of Vehicles
Single Feed Fuel Inlet For Easy Installation
Power Valve Blow Out Protection
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run
Compensates For All Vehicle Weights Gearing/Transmissions

from

$22.99

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

Center Hung Floats
0.11 in. Needle Diameter
Viton® Needle Material
Sold Individually
Non-Adjustable Type

from

$799.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

from

$534.99

The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.

Product Features:

Vibratory Polished For Good Looks
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

from

$18.99

Product Features:

The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.

from

$849.99

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Optimized Street/Strip Calibration That Works Out Of The Box
Manual Choke For Precise Cold Start Control
Mechanical Secondaries For Awesome Tire Turning Performance
4 Corner Idle Allows You To Precisely Control Your Idle System
Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Features A Tumble Polished Finish Can Also Be Hand Polished
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Glass Fuel Level Sight Windows For Easy Safe Float Adjustments
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
4 Corner Idle Allows You To Precisely Control Your Idle System
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians

from

$671.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Manual Choke For Precise Cold Start Control
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians

Top Picks for 1961 Chevrolet C20 Pickup Air Cleaner Parts

Upgrade Chevrolet C20 Pickups with top-quality Air Cleaner Parts parts, including 1 OEM and aftermarket selections for your 1961 model.

show more show less

from

$2.49

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

In-Demand Intake Manifold Parts for 1961 Chevrolet C20 Pickups

Select from 36 premium Intake Manifold Parts parts for your 1961 Chevrolet C20 Pickup, with prices ranging from $5.99 to $2,075.99.

show more show less

from

$395.99

Product Features:

Based on Performer Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg .Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
Fits Both Spread and Square Bore Carburetors
Also in Polished/PermaStar/EnduraShine Finish

from

$564.99

This is a great Manifold designed for competition engines built for circle track and drag racing using 23 degree standard port heads. Ideal for classes that require cast iron heads that require an unported intake manifold.

Product Features:

Single Plane With Isolated Plenum
Square Bore Carburetor Mounting Flange
Isolated Water Cross Over
Power Band 4500-8500 rpm
w/Maximum Velocity At Ports
Crisp Throttle Response

from

$34.99

Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals and distributor gasket
For OE replacement, high performance street, drag race and oval track use

from

$36.99

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:

Features 12-point Smaller-than-standard Bolt Head
Thick Flat Washers Distribute Optimum Clamp Load
Ideal Use Where Space Is Minimal On Race Manifolds
Bolts And Washers Zinc Plated For Protection
Zinc Plated For Protection

from

$17.99

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$20.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$5.99

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Manufactured from high quality materials for a long service life
Torque values listed on parts (where applicable)
Easy to install
Constructed to strict engineering quality standards

from

$374.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake
For Square Bore Carburetors Only

from

$356.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes and Accepts EGR

from

$296.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed for 1500 to 6550 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains
Also in Polished/PermaStar/EnduraShine Finish

from

$46.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material.
Provides excellent sealing and durability.
Can be trimmed if necessary for modified port applications.
Complete with manifold end seals and distributor gasket.
For OE replacement, high performance street, drag race and oval track use.

from

$60.99

Nominally Rated At 170,000 PSI Tensile Strength
Precision Machined Threads For Secure Engagement, And Would not Rust
Wide Under Head Flange And Companion Washers Provide Even Load Distribution
Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
Facilitates Optimum Sealing Of Gasket Surfaces

from

$2075.99

POWER PKG

from

$1865.99

Based on Performer RPM-Series with Unique Air Gap
Convert From Single To Dual-Quad Intake
Produces Incredible Top-End Horsepower
Edelbrock Total Power Package Maximizes Gains

from

$1022.99

POWER PKG

from

$830.99

POWER PKG

from

$749.99

Polished Version Of Edelbrock PN[7501]
Polish is Hand-Buffed for Brilliant Shine
Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades

from

$746.99

Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp

Product Features:

1500-7000 RPM Range
Single Plane Type-Throttle Body XT Style Flange
9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
Black Powder Coated Finish
Made In The USA

Performer EPS Manifold withOil Fill Tube for Small-Block Chevy, Polished Finish

from

$652.99

Edelbrock part No. 27031 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No. 4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer intake manifold No. 21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. This manifold offers a polished finish for a brilliant shine and classic look.

from

$607.99

Product Features:

Polished Version Of Edelbrock PN[7101]
Polish is Hand-Buffed for Brilliant Shine
Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades

from

$595.99

Edelbrock part #21011 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle respons

from

$530.99

Product Features:

Polished Version Of Edelbrock PN[2701]
Polish is Hand-Buffed for Brilliant Shine
Maximizes Performance with Edelbrock Carburetors
Maximizes Peak Torque Around 3500 RPM
Excellent Throttle Response and Mid-Range Power
Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order

from

$509.99

Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:

Based on C26 Low Profile with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
1.625 in. Taller Than Low-Profile PN[5425]
Also Available In EnduraShine Finish PN[75254]
Also Available As Complete Kit PN[2025/20254]
Best When Matched with Edelbrock 500cfm Carburetor
Use Fuel Line Kit PN[8088/8091]
Use Progressive Throttle Linkage Kit PN[7094]

from

$497.99

Product Features:

Designed for Idle to 5500 RPM
Manifold has a Balanced 180+ Firing Order
Contains Exhaust Gas Heat Riser
Offers Excellent Performance Potential
Front Oil Filler Tube Boss Included
Carburetor Center-to-Center Dimensions = 5-1/2 in
Also Available Polished PN[5419] But Not Fit HEI
Use Rochester 2GC (small 1-7/16 in bore)

Top-Rated Air Intakes Brands For Your 1961 Chevrolet C20 Pickup

Shop for the best-rated brands offering Air Intakes and other products for your 1961 Chevrolet C20 Pickups. Below you’ll find some of our best rated Air Intakes from FELPRO, Edelbrock, and Holley, and more. Air Intakes from these brands that fit a 1961 C20 Pickup start at just $2.49 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1961 Chevrolet C20 Pickup Air Intakes

When it comes to maintaining or upgrading your 1961 Chevrolet C20 Pickup, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 1961 Chevrolet C20 Pickup. With over 2 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $11.74. Plus, with over 2 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $20.99

(1)

Engine Intake Manifold Gasket Set

“Great gasket set. No issues.”

from $2.49

(1)

Air Cleaner Mounting Gasket

“Installed on a factory GM 4BBL carburetor. It fit perfect, and did exactly what it was supposed to do.”

Popular Edelbrock 1961 Chevrolet C20 Pickup Air Intakes

Edelbrock auto parts is one of the highest quality Air Intake brands in the market. Any 1961 Chevrolet C20 Pickup owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1961 C20 Pickup, Advance Auto Parts carries a full inventory of 3 Edelbrock Air Intakes. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Edelbrock Air Intakes range from $13.99 to $428.99, plus, with more than 57 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

from $13.99

(1)

Carburetor Accelerator Pump Diaphragm #12400 30cc

“exatly what I needed”

from $395.99

(1)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy

“The casting was beautiful in its natural finish. It had a bright appearance and the surface roughness was good for a sand casting. The machine finish ”

from $428.99

(55)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

“Easy bolt on installation”

FAQs for 1961 Chevrolet C20 Pickup Air Intakes

Which Air Intakes are best-sellers for 1961 Chevrolet C20 Pickups?

Out of 136 Air Intakes that fit 1961 Chevrolet C20 Pickups, the following parts are the top sellers:

Ultra-Seal Intake Manifold Gasket with Silicone Beading (5020476) – $34.99
Intake Manifold Bolts (6120970) – $17.99
Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (10648540) – $47.99

What’s the price range for 1961 Chevrolet C20 Pickup Air Intakes?

Air Intake prices for the 1961 Chevrolet C20 Pickup start at $1.99 and go up to $2,075.99 for the most premium parts.

What’s the average price of a Air Intake for a 1961 Chevrolet C20 Pickup?

The average price for Air Intakes for the 1961 Chevrolet C20 Pickup is $563.33. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Chevrolet C20 Pickup model years?

Yes, we currently carry Air Intakes for 13 model years of Chevrolet C20 Pickups between 1960 and 1974. Air Intakes are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1970, 1969, 1968, 1967, and 1966.

What are the cheapest Air Intakes for my 1961 Chevrolet C20 Pickup?

The cheapest 1961 Chevrolet C20 Pickup Air Intakes we carry in stock are:

Carburetor Mounting Gasket (5181631) – $1.99
Air Cleaner Mounting Gasket (3203689) – $2.49
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (22140133) – $5.99
Carburetor Accelerator Pump Diaphragm #12400 30cc (10648626) – $13.99
Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (10648376) – $13.99

What are the top-rated Air Intakes that fit the 1961 Chevrolet C20 Pickup?

Out of 137 reviews by customers, our 1961 Chevrolet C20 Pickup Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1961 Chevrolet C20 Pickup and their top-rated products:

Air Cleaner Parts
- Air Cleaner Mounting Gasket (3203689) – $2.49
Intake Manifold Parts
- Air Cleaner Mounting Gasket (3203689) – $2.49

What types of Air Intakes do you sell for my 1961 Chevrolet C20 Pickup?

As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 1961 Chevrolet C20 Pickup:

Can I get help with 1961 Chevrolet C20 Pickup Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.

What is your return policy for Chevrolet C20 Pickup Air Intakes?

Advance Auto Parts keeps returns simple. For new Chevrolet C20 Pickup Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1961 Chevrolet C20 Pickup Air Intakes

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90240-2)

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Weiand – Stealth; Intake Manifold (Part No.8019)

Edelbrock – RPM Dual-Quad manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2025)

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

Felpro – Carburetor Mounting Gasket (Part No.60043)

Felpro – Carburetor Mounting Gasket (Part No.9288)

Holley – Street Carburetor: 450 CFM, No Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate (Part No.0-9776)

United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3395)

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1819)

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1734)

Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)

Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Felpro – Air Cleaner Mounting Gasket (Part No.11528)

Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Edelbrock – Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1781)

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1773)

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Holley – Performance and Race Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet (Part No.0-4776C)

Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Holley – Street Carburetor: 450 CFM, No Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate (Part No.0-9776)

Holley – Street Carbs (Part No.0-80508S)

Holley – Street Carbs (Part No.0-8007)

Holley – Prem Street Carbs (Avengers) (Part No.0-81570)

Holley – Street Carbs (Part No.0-3310C)

Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)

Holley – Street Carbs (Part No.0-1850S)

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Felpro – Carburetor Mounting Gasket (Part No.9288)

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Holley – Street Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate (Part No.0-1850C)

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Holley – Off Road Carbs (Part No.0-90670)

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Holley – Street/Strip Carbs (Part No.0-4779C)

Holley – Carburetor – 770 CFM Alum Street Avenger E/C (Part No.0-83770)

Holley – Prem Street Carbs (Avengers) (Part No.0-81670)

Felpro – Air Cleaner Mounting Gasket (Part No.11528)

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)

Holley – Keith Dorton Series; Intake Manifold (Part No.300-110)

Mr. Gasket – Ultra-Seal Intake Manifold Gasket with Silicone Beading (Part No.5821)

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)

Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)

Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)

Mr. Gasket – Intake Gasket (Part No.116)

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

Edelbrock – POWER PKG (Part No.2069)

Edelbrock – RPM Dual-Quad manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2025)

Edelbrock – POWER PKG (Part No.2020)

Edelbrock – POWER PKG (Part No.2021)

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)

Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)

Edelbrock – Performer EPS Manifold withOil Fill Tube for Small-Block Chevy, Polished Finish (Part No.27031)

Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.21011)

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)