1960 GMC Suburban Performance and Racing Products

Essential Performance and Racing Products for 1960 GMC Suburbans

Mr. Gasket – Aluminum Valve Cover (Part No.6854)

Aluminum Valve Cover

from

$179.99
High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

Product Features:
  • Fits small block Chevy engines
  • Polished cast aluminum construction
  • Tall design cover for added rocker clearance
  • Sold as a pair
  • Stops Gasket From Moving
  • A Perfect Fit
  • Beautifully Polished To A High Luster
See More

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Blaster 2 Coil: High Performance Ignition Upgrade

from

$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1640)

Engine Valve Cover Gasket Set

from

$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)

CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA

from

$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)

Automatic Shifter, Quarter Stick Powerglide

from

$429.99
The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.

Product Features:
  • Forward and Reverse Shift Patterns
  • Chrome Plated Trigger for Detent Activity
  • Factory Neutral Safety Switch
  • Compact And Lightweight
  • Roller Detent with Shifter Pattern
See More

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

Motive Gear – Differential Mini Spool (Part No.MS12C)

Differential Mini Spool

from

$108.99


Product Features:
  • MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430
See More

Powertrax – Lock Right Locker (Part No.2415-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Intake Bolt Kit (Part No.5003)

    Intake Bolt Kit

    from

    $75.99
    Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

    Product Features:
    • Chrome plated
    • Grade 8
    • 12-point head
    • AN washers with no exposed shoulder for a professional appearance
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1025)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $72.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

    Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

    from

    $195.99


    Product Features:
    • Maximizes Performance with Edelbrock Carburetors
    • Runners Tuned to Match Square Bore Carburetor
    • Maximizes Peak Torque Around 3500 RPM
    • Excellent Throttle Response and Mid-Range Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

    PERFORMANCE REAR MAIN SEAL SET

    from

    $36.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

    from

    $25.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1819)

    PERFORMANCE OIL PAN GASKET SET

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    from

    $65.99
    Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $147.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Dyno Tested And Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Upgrade your 1960 GMC Suburban with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1960 GMC Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Performance and Racing Products for the 1960 GMC Suburban, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1960 GMC Suburban at great prices. Our Performance and Racing Products inventory for this model ranges from just $20.29 to $999.99, with an average price of $226.68. Our 41 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1960 GMC Suburban without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 GMC Suburban, we stock popular OEM and aftermarket Performance and Racing Products from top names like Edelbrock, FEL-PRO Performance, Mr. Gasket, and more. Edelbrock Performance and Racing Products start at just $35.99 and boast an impressive 4 stars average rating from customers. FEL-PRO Performance and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $20.29, and at an average 4 stars rating. With 29 customer reviews and counting, our 1960 GMC Suburban Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1960 GMC Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your Suburban in top shape, all in one place. Start shopping confidently below for your 1960 GMC Suburban!

    Best-Selling Performance Ignition Products for 1960 GMC Suburbans

    Enhance the driving experience in your GMC with 4 quality Performance Ignition Product components, starting at $30.49.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Popular 1960 GMC Suburban Performance Engines

    Customize your GMC with 27 Performance Engines products like Performance Engine Cylinder Head Gaskets, Performance Intake Manifolds, and Performance Engine Valve Cover Gasket Sets, all priced under $999.99.

    Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

    Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

    from

    $195.99


    Product Features:
    • Maximizes Performance with Edelbrock Carburetors
    • Runners Tuned to Match Square Bore Carburetor
    • Maximizes Peak Torque Around 3500 RPM
    • Excellent Throttle Response and Mid-Range Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

    Engine Valve Cover Gasket Set

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

    Valve Cover Gasket Set for Chevrolet

    from

    $35.99
    Product Features:
    • Valve Cover Gasket
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    from

    $65.99
    Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

    Performer Small-Block Chevy Intake Manifold for Street Performance

    from

    $339.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes and Accepts EGR
    See More

    Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

    Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

    from

    $322.99
    Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

    Product Features:
    • Idle-5500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
    • Satin Finish
    • Non-EGR W/ Oil Fill Tube
    See More

    Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)

    CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA

    from

    $529.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

    CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

    from

    $258.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

    from

    $25.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Weiand – Team G; Intake Manifold (Part No.7531)

    Team G; Intake Manifold

    from

    $999.99


    Product Features:
    • Designed For Today’s Larger Cubic Inch Big Block
    • Perfect For Hard Core Drag Racers
    • Permanent Mold Casting Process
    • For Lighter And More Consistent Castings
    • Dyno Proven To Make 17hp More Than Competitors
    See More

    Edelbrock – Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold (Part No.75013)

    Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold

    from

    $525.99
    Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes.

    Product Features:
    • 1500-6500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
    • Black Powder Coated Finish
    • Non-EGR
    See More

    Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)

    CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA

    from

    $522.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)

    C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern

    from

    $473.99
    Product Features:
    • Designed for Idle to 5500 RPM
    • Manifold has a Balanced 180+ Firing Order
    • Contains Exhaust Gas Heat Riser
    • Offers Excellent Performance Potential
    • Front Oil Filler Tube Boss Included
    • Carburetor Center-to-Center Dimensions = 5-1/2 in
    • Also Available Polished PN[5419] But Not Fit HEI
    • Use Rochester 2GC (small 1-7/16 in bore)
    See More

    Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)

    Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

    from

    $445.99
    Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

    Product Features:
    • Idle-5500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
    • Black Powder Coated Finish
    • Non-EGR W/ Oil Fill Tube
    See More

    Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3706)

    Performer Intake Manifold Small-Block Chevy

    from

    $381.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes and Accepts EGR
    See More

    Weiand – X-CELerator; Intake Manifold (Part No.7547-1)

    X-CELerator; Intake Manifold

    from

    $259.99


    Product Features:
    • 2000-6500 RPM Power Band
    • Single Plane/Open Plenum Design
    • No Provision For Divorced Or Hot Air Choke
    • Square Flange Carburetor Mounting
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $147.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Dyno Tested And Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    Mr. Gasket – Intake Bolt Kit (Part No.5003)

    Intake Bolt Kit

    from

    $75.99
    Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

    Product Features:
    • Chrome plated
    • Grade 8
    • 12-point head
    • AN washers with no exposed shoulder for a professional appearance
    See More

    FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

    PERFORMANCE REAR MAIN SEAL SET

    from

    $36.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Top Picks for 1960 GMC Suburban Performance Exhaust Products

    Upgrade GMC Suburbans with top-quality Performance Exhaust Products parts, including 3 OEM and aftermarket selections for your 1960 model.

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

    Real-Seal; Header Gasket

    from

    $85.39


    Product Features:
    • Water/Weather Resistant
    • Re-Useable
    • Will Not Burn Or Blow Out
    • Suitable For Port-Matching
    • Made In USA
    See More

    Mr. Gasket – Alternator Bracket (Part No.9850)

    Alternator Bracket

    from

    $25.99
    Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

    Product Features:
    • Chrome Plated Steel
    • F-Style
    • Heavy Gauge Steel Construction
    • Fits Small Block Chevy 265-400 CID
    • Must Be Used With Part 9852
    See More

    In-Demand Performance Radiators for 1960 GMC Suburbans

    Select from 1 premium Performance Radiators parts for your 1960 GMC Suburban.

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Most Sold 1960 GMC Suburban Performance Valve Covers

    Explore our best-selling GMC parts for the 1960 Suburban among 1 OEM and aftermarket options starting from $179.99.

    Mr. Gasket – Aluminum Valve Cover (Part No.6854)

    Aluminum Valve Cover

    from

    $179.99
    High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

    Product Features:
    • Fits small block Chevy engines
    • Polished cast aluminum construction
    • Tall design cover for added rocker clearance
    • Sold as a pair
    • Stops Gasket From Moving
    • A Perfect Fit
    • Beautifully Polished To A High Luster
    See More

    Top-Rated Performance and Racing Products Brands For Your 1960 GMC Suburban

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1960 GMC Suburbans. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, FEL-PRO Performance, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1960 Suburban start at just $20.29 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Edelbrock 1960 GMC Suburban Performance and Racing Products

    When it comes to maintaining or upgrading your 1960 GMC Suburban, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1960 GMC Suburban. With over 12 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99, with an average price of just $266.74. Plus, with over 10 customer reviews and an average rating of 4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Performer Small-Block Chevy Intake Manifold for Street Performance
    from
    $339.99
    This product is not rated

    Performer Small-Block Chevy Intake Manifold for Street Performance

    “”

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
    from
    $65.99
    This product is not rated

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    “”

    Popular FEL-PRO Performance 1960 GMC Suburban Performance and Racing Products

    FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1960 GMC Suburban owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1960 Suburban, Advance Auto Parts carries a full inventory of 9 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $20.29 to $52.99, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
    from
    $39.49
    This product is not rated

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    “”

    Engine Timing Cover Gasket
    from
    $20.29
    This product is not rated

    Engine Timing Cover Gasket

    “”

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set
    from
    $25.49
    This product is not rated

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

    “”

    FAQs for 1960 GMC Suburban Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1960 GMC Suburbans?

    Out of 41 Performance and Racing Products that fit 1960 GMC Suburbans, the following parts are the top sellers:

    What’s the price range for 1960 GMC Suburban Performance and Racing Products?

    Performance and Racing Product prices for the 1960 GMC Suburban start at $20.29 and go up to $999.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1960 GMC Suburban?

    The average price for Performance and Racing Products for the 1960 GMC Suburban is $226.68. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other GMC Suburban model years?

    Yes, we currently carry Performance and Racing Products for 6 model years of GMC Suburbans between 1961 and 1966. Performance and Racing Products are bought most frequently for the following model years: 1966, 1965, 1964, 1963, 1962, and 1961.

    What are the cheapest Performance and Racing Products for my 1960 GMC Suburban?

    The cheapest 1960 GMC Suburban Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1960 GMC Suburban?

    Out of 29 reviews by customers, our 1960 GMC Suburban Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1960 GMC Suburban and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1960 GMC Suburban?

    Can I get help with 1960 GMC Suburban Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

    What is your return policy for GMC Suburban Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new GMC Suburban Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.