1960 Ford Galaxie Performance and Racing Products
Find Your Specific 1960 Ford Galaxie Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1960 Galaxie. Advance Auto Parts has popular Galaxie parts like Performance Engines, Performance Distributors, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Galaxie model years including
1966,
1967,
1968,
1969,
1970,
1971,
1972,
1973,
1974 and more. Select a category of 1960 Ford Galaxie Performance and Racing Products below and start saving instantly.
Popular 1960 Ford Galaxie Performance and Racing Products Categories
Essential Performance and Racing Products for 1960 Ford Galaxies
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$620.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
Accel – Contact And Condenser Kit (Part No.8203)
from
$86.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mr. Gasket – Valve Cover (Part No.9804)
from
$83.99
These valve covers are constructed of a heavy gauge steel that will also help to prevent leaks around sealing flanges. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford small block
- Chrome plated steel construction
- Sold as a pair
- Chrome Plated
Edelbrock – Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2 (Part No.4162)
from
$465.99
The Edelbrock #4162 Classic Series Valve Covers are designed for Ford FE V8 1958-1976 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Ford FE V8 1958-76
- Tall
- Polished Aluminum
- Set Of Two
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
MSD Ignition – Distributor Gear; Ford; 302; Bronze (Part No.8583)
from
$90.99
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Interstitial carbide improves wear resistance/running properties
- Melonite QPQ coated reduces friction and initial wear
- Proprietary formulated ductile iron.
- Micro Polished Surface For Smooth Contact
- Increased outer hardened layer thickness (RC 55-60)
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$11.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)
from
$30.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Motive Gear – PRO Gear Lightweight Differential Ring And Pinion – Small Pinion (Part No.F990543SP)
Richmond Gear – RngPnn (Part No.69-0290-1)
from
$379.99
RngPnn
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1228)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-74; w/4 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)
from
$49.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam K-Kit (Part No.K34-600-5)
from
$1548.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam K-Kit (Part No.K33-234-4)
from
$654.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7228)
from
$29.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7229)
from
$33.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.40 in. x 2.04 in. Port Size
- For 390-428 FE Ford V8
- Gray Color
- Two Piece Configuration
Mr. Gasket – Exhaust Gasket Set (Part No.253)
from
$33.99
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.
Product Features:
See More
Product Features:
- High-Temperature Exhaust Material
- Withstands Extreme Exhaust Heat
- Excellent Sealing Durability And Torque Retention
- Superior Tensile Strength
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Product Features:
See More
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Upgrade your 1960 Ford Galaxie with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Ford Galaxie, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Galaxie functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Performance and Racing Products for the 1960 Ford Galaxie, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1960 Ford Galaxie at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $13.99 to $849.99, with
an average price of $300.63.
Our 40 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1960 Ford Galaxie without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Ford Galaxie, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, Accel, Holley, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
Accel and Holley also bring quality to the table, with Performance and Racing Products available starting at $45.99, and at an average 4.1 stars rating.
With 373 customer reviews and counting, our 1960 Ford Galaxie Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1960 Ford Galaxie is always ready to roll. We’re committed to providing you with everything you need to keep your Galaxie in top shape, all in one place.
Start shopping confidently below for your 1960 Ford Galaxie!
Best-Selling Performance Engines for 1960 Ford Galaxies
Enhance the driving experience in your Ford with 5 quality Performance Engine components, starting at $13.99.
Edelbrock – Performer-Plus Camshaft Kit for Ford FE 352-428 V8 (Part No.2106)
from
$392.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 1985-1976 390-428 FE Fords (Part No.7224)
from
$30.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Competition Cams – High Energy Hydraulic Flat Lifter for Ford 352-428, 144-250 and 2600-2800cc V6. (Part No.834-1)
from
$13.99
High Energy Hydraulic Flat Lifter for Ford 352-428, 144-250 and 2600-2800cc V6.
Most Popular 1960 Ford Galaxie Performance Distributors
Customize your Ford with 4 Performance Distributors products
like Performance Distributors and
Performance Distributor Components, all
priced under $849.99.
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.9860)
from
$15.99
Chrome plated steel. Includes hold-down bolt or stud. Holds the distributor in place for accurate timing. Serrated bottom prevents the distributor from turning.
Product Features:
See More
Product Features:
- Rolled Edges For Strength
- Ideal For Magnetos
- Ideal For Ignition Distributor
MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)
from
$620.99
MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)
from
$849.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Top Picks for 1960 Ford Galaxie Performance Fuel Systems
Upgrade Ford Galaxies with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1960 model.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
In-Demand Performance Ignition Products for 1960 Ford Galaxies
Select from 8 premium Performance Ignition Products parts for your 1960 Ford Galaxie, with prices ranging from $33.99 to $199.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Contact And Condenser Kit (Part No.8203)
from
$86.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$51.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Sold 1960 Ford Galaxie Performance Exhaust Products
Explore our best-selling Ford parts for the 1960 Galaxie among 2 OEM and aftermarket options starting from $33.99.
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7229)
from
$33.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.40 in. x 2.04 in. Port Size
- For 390-428 FE Ford V8
- Gray Color
- Two Piece Configuration
Top-Rated Performance and Racing Products Brands For Your 1960 Ford Galaxie
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1960 Ford Galaxies. Below you’ll find some of our best rated Performance and Racing Products from Mallory, Accel, and Holley, and more. Performance and Racing Products from these brands that fit a 1960 Galaxie start at just $45.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1960 Ford Galaxie Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Ford Galaxie, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1960 Ford Galaxie. With over 2 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99, with an average price of just $121.49. Plus, with over 4 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
from
$149.99
(1)
Mallory Kit: Unil Conv: Delco: V8
“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”
Popular Accel 1960 Ford Galaxie Performance and Racing Products
Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1960 Ford Galaxie owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1960 Galaxie, Advance Auto Parts carries a full inventory of 3 Accel Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Accel Performance and Racing Products range from $45.99 to $86.99, plus, with more than 64 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$45.99
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
“Works just fine”
FAQs for 1960 Ford Galaxie Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1960 Ford Galaxies?
Out of 40 Performance and Racing Products that fit 1960 Ford Galaxies, the following parts are the top sellers:
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $499.99
- Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (6340019) – $682.99
- PERFORMANCE OIL PAN GASKET SET (19781457) – $29.99
What’s the price range for 1960 Ford Galaxie Performance and Racing Products?
Performance and Racing Product prices for the 1960 Ford Galaxie start at $13.99 and go up to $849.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1960 Ford Galaxie?
The average price for Performance and Racing Products for the 1960 Ford Galaxie is $300.63. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Galaxie model years?
What are the cheapest Performance and Racing Products for my 1960 Ford Galaxie?
The cheapest 1960 Ford Galaxie Performance and Racing Products we carry in stock are:
- High Energy Hydraulic Flat Lifter for Ford 352-428, 144-250 and 2600-2800cc V6. (50286487) – $13.99
- Chrome Distributor Hold-Down Clamp (11151950) – $15.99
- Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
- PERFORMANCE OIL PAN GASKET SET (19781457) – $29.99
- Intake Manifold Gasket for 1985-1976 390-428 FE Fords (22342072) – $30.99
What are the top-rated Performance and Racing Products that fit the 1960 Ford Galaxie?
Out of 373 reviews by customers, our 1960 Ford Galaxie Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1960 Ford Galaxie and their top-rated products:
- Performance Ignition Products
- Contact And Condenser Kit (5024293) – $86.99
- Mallory Kit: Unil Conv: Delco: V8 (17350020) – $149.99
- Unilite Ignition Module (17350025) – $92.99
- Performance Engines
- Contact And Condenser Kit (5024293) – $86.99
- Mallory Kit: Unil Conv: Delco: V8 (17350020) – $149.99
- Unilite Ignition Module (17350025) – $92.99
- Performance Exhaust Products
- Contact And Condenser Kit (5024293) – $86.99
- Mallory Kit: Unil Conv: Delco: V8 (17350020) – $149.99
- Unilite Ignition Module (17350025) – $92.99
What types of Performance and Racing Products do you sell for my 1960 Ford Galaxie?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1960 Ford Galaxie:
Can I get help with 1960 Ford Galaxie Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Galaxie Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Galaxie Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
