1960 Ford Fairlane Drivetrains

Essential 1960 Ford Fairlane Drivetrains

Yukon Gear – Pinion Install Kit For Ford 8" Differential (Part No.13040)

Pinion Install Kit For Ford 8" Differential

from

$251.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 8″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Extra HD 3.062" Nodular Iron Dropout For Ford 9" (Part No.32099)

Extra HD 3.062" Nodular Iron Dropout For Ford 9"

from

$615.99
Yukon Extra HD 3.062″ nodular Iron dropout for Ford 9″. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Rated up to 1200HP!

Product Features:
  • Fits Ford 9″
  • 3.062″ carrier race diameter
  • Nodular iron for added strength
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

USA Standard Gear – Mini Spool For Ford 9" With 28 Spline Axles (Part No.59022)

Mini Spool For Ford 9" With 28 Spline Axles

from

$59.99
Product Features:
  • Fits Ford 9″ with 28 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Felpro – AXLE FLANGE GASKET (Part No.4828)

AXLE FLANGE GASKET

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support)

from

$74.99
1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:
  • Adapter sleeve
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More

Motive Gear – Differential Gear Install Kit (Part No.F9IKN)

Differential Gear Install Kit

from

$46.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Driveworks – Taper Bearing Set (Part No.S-A-6)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPF9)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Mr. Gasket – Rear End Gasket – Ford 9" – Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability (Part No.82)

Rear End Gasket - Ford 9" - Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability

from

$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

1310 U/Joint With Zerk Fitting On Cross

from

$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)

Spindle Washer - I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each)

from

$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

National – Bearings (Part No.207-L)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)

Ford 7.5", 8", 8.8", & 9" Axle Stud

from

$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:
  • Axle stud for Ford 7.5″, 8.8″ and 9″
  • 1/2″ x 20 thread
  • 1 7/8″ long
  • 29/64″ shoulder length
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)

Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes

from

$67.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits large bearing applications
  • 1/2″ bolt holes
  • 3 1/2″ x 2 3/8″ bolt pattern
See More

Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-013)

Spindle Washer - I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each)

from

$1.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Powertrax – Grip PRO Traction System (Part No.GT109031)

Grip PRO Traction System

from

$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Flat Side Gear Without Hub For 9" Ford With 31 Splines (Part No.16162)

Flat Side Gear Without Hub For 9" Ford With 31 Splines

from

$46.99
Flat side gear without hub for 9″ Ford with 31 splines.

Product Features:
  • Side gear without hub
  • Fits Ford 8″ and 9″ Trac Loc positraction with 31 spline axles
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)

Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

from

$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
  • 1.0″ long
See More

National – Multi Purpose Seal (Part No.8181NA)

Multi Purpose Seal

from

$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Preload Shim Kit For Chrysler 8.75" & Ford 9"

from

$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:
  • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Fill Plug For Ford 9", 1/2" Thread

from

$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fill plug
  • Fits Ford 9″
See More

Popular 1960 Ford Fairlane Drivetrains Categories

1960 Ford Fairlane Drivetrains

You count on your 1960 Ford Fairlane to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 353 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1960 Ford Fairlane.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Moog, Driveworks, and National. 1960 Ford Fairlane Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 915 extensive product reviews on 1960 Ford Fairlane Drivetrains. Some of the top-rated Drivetrains products we carry are Tapered Cone/Cup Wheel Bearing Set with 4.4 stars and Universal Joint with 4.9 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1960 Ford Fairlane below to get started!

Top-Rated Drivetrains Brands For Your 1960 Ford Fairlane

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1960 Ford Fairlane running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1960 Ford Fairlane back on the road. Some of the top-rated Felpro products in these categories are:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1960 Ford Fairlane Drivetrains

What are the most purchased Drivetrains for the 1960 Ford Fairlane?

Out of 353 Drivetrains for the 1960 Ford Fairlane, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Bearings
from $16.99
(25)
Bearings
Differential Bearings

What are the top-rated 1960 Ford Fairlane Drivetrains?

Top-rated Drivetrains for your 1960 Ford Fairlane based on customer reviews/ratings are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
“Advance Auto website when entering my 1989 Ford F150 doesn’t ask if it is 2 wheel or 4 wheel drive. So I had to return the first set”
Universal Joint
from $28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
Bearings
from $15.99
(9)
Bearings
“as advertised”