1959 Jeep CJ6 Drivetrains
More 1959 Jeep CJ6 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1959 Jeep CJ6, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1959 Jeep CJ6 Drivetrains
Omix – Axle Bearing Kit (Part No.16560.41)
from
$94.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Includes Wheel Bearing; Seals; And Retainers
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Master Overhaul Kit For Dana 30 Front Differential (Part No.14017)
from
$302.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30 front
- Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Crown Auto Jeep Replacmnt – OE Replacement, With Retaining Plates/ Felt Seal/ Rubber Seal (Part No.J0915664)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Omix – Axle Snap Ring (Part No.18670.35)
from
$1.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Corrosion Resistant
- Limited 5 Year Warranty
Rugged Ridge – DiffrlCover (Part No.16595.13)
from
$197.99
DiffrlCover
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J0649784)
from
$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Omix – Transfer Case Output Shaft Sliding Gear (Part No.18670.10)
from
$99.99
Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Transfer Case Output Shaft Hub (Part No.18670.15)
from
$39.49
Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Transfer Case (Part No.18880.01)
from
$311.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Case Only
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)
Omix – Transfer Case Snubber (Part No.18670.36)
from
$8.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head, 1 Pack (Part No.090-018)
from
$11.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Omix – Transfer Case Intermediate Shaft Kit (Part No.18605.03)
from
$49.49
Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Includes 1-1/4 in. Shaft/Bearings/Washers
- Limited 5 Year Warranty
National – Multi Purpose Seal (Part No.5778V)
from
$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Omix – Transfer Case Overhaul Repair Kit (Part No.18601.02)
from
$331.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Incl. Front And Rear Bearings/Cups/Front Ball Bearing
- Incl. Gaskets/Oil Seal Kit/Needle Bearings/Small Parts Kit
- Limited 5 Year Warranty
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Omix – Axle Shaft Assembly (Part No.16523.02)
from
$342.99
Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.
Product Features:
See More
Product Features:
- Front Right Passenger Side
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Transfer Case Output Shaft Bearing Snap Ring (Part No.18670.02)
from
$2.49
Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Front
- Limited 5 Year Warranty
Dorman – Standard Spindle Nut 1 In.-5/8 In.-16 Hex 2-1/16 In. (sold by each) (Part No.615-126)
from
$12.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Inner Axle Seal For Dana 30 (Part No.30141)
from
$16.99
Replacement Inner axle seal for Dana 30, 2.125″ OD.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front inner axle seal
- Fits Dana Spicer 30
Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)
from
$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- 3.73 and up ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Omix – Drive Shaft Pinion Yoke (Part No.16580.04)
from
$84.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Popular 1959 Jeep CJ6 Drivetrains Categories
1959 Jeep CJ6 Drivetrains
You count on your 1959 Jeep CJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 125 Drivetrains ranging in price from $1.79 to $883.99, you’re sure to find everything you need for your 1959 Jeep CJ6.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, DriveWorks, and Spicer. 1959 Jeep CJ6 Drivetrains start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 220 extensive product reviews on 1959 Jeep CJ6 Drivetrains. Some of the top-rated Drivetrains products we carry are Non-Greaseable Super Strength Universal Joint with 2.3 stars and Universal Joint U-Bolt Kit with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1959 Jeep CJ6 below to get started!
Top-Rated Drivetrains Brands For Your 1959 Jeep CJ6
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 Jeep CJ6 running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular National Drivetrains
You’ll find popular National brand products across Transfer Cases and Differentials. All are waiting to get your 1959 Jeep CJ6 back on the road. Some of the top-rated National products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1959 Jeep CJ6, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1959 Jeep CJ6 Drivetrains
What are the most purchased Drivetrains for the 1959 Jeep CJ6?
Out of 125 Drivetrains for the 1959 Jeep CJ6, the most popular in our inventory are:
What are the top-rated 1959 Jeep CJ6 Drivetrains?
Top-rated Drivetrains for your 1959 Jeep CJ6 based on customer reviews/ratings are:
from
$25.99
(6)
Non-Greaseable Super Strength Universal Joint
“Nice machining and construction on these joints. Fit my 78 CJ7 front shafts without trouble. The main issue folks are having is being shadetree mech”
from
$9.99
(4)
Universal Joint U-Bolt Kit
“I used these to replace the factory originals that had over 80K miles on a 1964 Chevelle Malibu. I had a strange click in the differential area and s”
from
$36.99
(4)
Greaseable Super Strength Universal Joint
“Replaced all u joints frt axles frt drive and main shaft, time will tell.”
