1959 Ford Ranchero Differentials

Essential 1959 Ford Ranchero Differentials

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

Yukon Gear – 9" Ford HD 6061 Aluminum Pinion Support (Part No.32162)

9" Ford HD 6061 Aluminum Pinion Support

from

$215.99
9″ Ford HD 6061 aluminum pinion support, Daytona, PLAIN-SILVER, NO races.

Product Features:
  • Fits Ford 9″ with 28 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • 6061 aluminum
  • Does not include races
See More

Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)

Pinion Install Kit For Ford 9" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ without aftermarket Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Differential Bearing Cone (Part No.742G255)

Differential Bearing Cone

from

$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O (Part No.28030)

Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O

from

$1211.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.

Product Features:
  • Fits Ford 9″ with 35 spline axles and loadbolt housing
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
  • Aggressive design for racing applications only
See More

FAG US – SHAFT SEAL (Part No.SS2865)

SHAFT SEAL

from

$15.99
SHAFT SEAL

Motive Gear – Differential Pinion Nut (Part No.379570S)

Differential Pinion Nut

from

$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

USA Standard Gear – Master Overhaul Kit for the Ford 8" Differential w/ HD Posi (Part No.37029)

Master Overhaul Kit for the Ford 8" Differential w/ HD Posi

from

$249.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 8″ with aftermarket positraction
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Pinion Support Bolt For 8" And 9" Ford

from

$6.99
Pinion support bolt for 8″ and 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 8″ and 9″
  • 3/8″ x 24 thread
  • 1.0″ long
See More

Pro-King – Differential Cover Gasket (Part No.762B303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Trac Loc Friction Plate, Single Sided, 4 Tab (Part No.16179)

Trac Loc Friction Plate, Single Sided, 4 Tab

from

$29.99
Product Features:
  • Friction plate
  • Fits Ford 8″ and 9″ Trac Loc
See More

Yukon Gear – Steel Spool For Ford 9" With 31 Spline Axles (Part No.32045)

Steel Spool For Ford 9" With 31 Spline Axles

from

$289.99
Yukon Performance 2-1/8″ deck steel spool for 9″ Ford with 31 spline axles. Spool uses 1.785″ journal bearings. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Bearing Install Kit For Ford 9" Differential, Lm501310 Bearings (Part No.11044)

Bearing Install Kit For Ford 9" Differential, Lm501310 Bearings

from

$228.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses carrier bearings & races with an I.D. of 1.625″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Ford 9″ with LM501310 carrier races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, pilot bearing, marking compound and brush.
See More

Yukon Gear – 7.25" Ford Crush Sleeve – 2.00" Long (Part No.33084)

7.25" Ford Crush Sleeve - 2.00" Long

from

$34.99
7.25″ Ford crush sleeve. 2.00″ long.

Product Features:
  • Crush sleeve
  • Fits Ford 7.5″
  • 2.00″ tall
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Trac Loc Spring For Ford 9" & 8"

from

$8.99
Product Features:
  • Trac Loc spring for Ford 8″ and 9″
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Street Design

from

$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1011-B)

RngPnnInstlKt

from

$48.99
RngPnnInstlKt

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)

Ford 8" & 9" Tracloc Ring Gear Bolt

from

$4.99
Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with Trac Loc limited slip
  • 1.25″ long
See More

1959 Ford Ranchero Differentials

Maybe you’re in the middle of a full rebuild of that 1959 Ford Ranchero. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 310 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1959 Ford Ranchero running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1959 Ford Ranchero. Driveworks, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1959 Ford Ranchero, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 93 reviews in this category, some of the top rated parts include Shaft Repair Sleeve with 5.0 stars and No-Slip Traction System with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1959 Ford Ranchero rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1959 Ford Ranchero Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1959 Ford Ranchero demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranchero the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1959 Ford Ranchero, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

Top 1959 Ford Ranchero Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1959 Ford Ranchero. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Oil Seal
from $4.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1959 Ford Ranchero Differentials

What are the most purchased Differentials for the 1959 Ford Ranchero?

Out of 310 Differentials for the 1959 Ford Ranchero, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
Differential Pinion Seals
Differential Pinion Nut
from $6.49
(1)
Differential Pinion Nut
Differential Pinion Shaft Nuts

What are the top-rated 1959 Ford Ranchero Differentials?

Top-rated Differentials for your 1959 Ford Ranchero based on customer reviews/ratings are:
Shaft Repair Sleeve
from $43.99
(2)
Shaft Repair Sleeve
“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
“Installed, no issues, works great.”