1959 Chevrolet Corvette Distributors
More 1959 Chevrolet Corvette Distributors
Find your specific 1959 Chevrolet Corvette original or aftermarket Distributors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1959 Chevrolet Corvette Distributors
Forecast – Forecast Distributor Rotor (Part No.F2020326365FOR)
from
$6.18
Forecast Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Resistors (Asian) / RFI Suppression (European)
- Installation Screws
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve (Asian)
Carquest Premium – Distributor Rotor (Part No.DAA1001)
from
$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1033)
from
$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Rotor (Part No.23A1019)
from
$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1101)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1099)
from
$29.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1088)
from
$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
PerTronix – D703700 Vacuum Lockout Kit for Flame-Thrower Counter Clockwise Billet Distributor (Part No.D703700)
from
$18.99Product Features:
- PerTronix D703700 Vacuum Lockout Kit for PerTronix Flame-Thrower Counter Clockwise Billet Distributor
- Replacement Part (only) for PerTronix Flame Thrower Distributors
MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)
from
$46.99
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
ACDelco – Ignition Distributor Cap (Part No.D308R)
from
$24.29
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Distributor Cap (Part No.CAE1055)
from
$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MSD Ignition – LT-1 Distributor Cap and Rotor Kit; GM; LT-1; 350/5.7L SFI; 93-94 (Part No.8481)
from
$235.99
Finally a high quality cap and rotor for the front mount LT1 distributor! LT1 fans have been searching for a cap that could deliver the performance of the LT1 and MSD is happy to bring it to them. Remember, changing the cap and rotor on this engine is no.
Product Features:
See More
Product Features:
- Fits MSD LT1 Distributor PN[8381]
- Injection molded housing from DuPont material
- Extreme strength; high dielectric properties
- Terminal paths encased in epoxy compound
- Brass/stainless steel rotor tip design
- Includes fresh air vacuum kit
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
Carquest – Distributor Cap (Part No.24E1025)
from
$17.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Mr. Gasket – Transparent Distributor Cap (Part No.1263C)
from
$80.99
With twice the dielectric strength of stock caps (no more shorting or arcing), these caps will not carbon track. Fits all 1957-74 V8 Chevrolet, Cadillac, Buick, Oldsmobile and Pontiac with window cap.
Product Features:
See More
Product Features:
- Will not carbon track
- No more shorting or cracking
Accel – Distributor, Performance Replacement HEI-Chev V8 265-454, No Coil (Part No.59107)
from
$184.99
ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature: High performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug in replacement with factory type connectors for plug and play installation.
Product Features:
See More
Product Features:
- Direct Plug In Factory Replacement Plug And Play
- CNC Machined 6061 T6 Billet Aluminum Housing
- High Dielectric Strength Thermoplastic Cap with Br
- 4 Topin Module with Dwell Control Triggers At 75 R
- Easy Access Fully Adjustable Mechanical Advance
- Adjustable Vacuum Advance
- Fit Non Computerized Vehicles
MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)
from
$481.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
Accel – Distributor, Performance Replacement GM Opti-Spark-II-GM V8 5.7L LT1/LT4 (Part No.59125)
from
$419.99
ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature: High performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug in replacement with factory type connectors for plug and play installation.
Product Features:
See More
Product Features:
- Direct Plug In Factory Replacement Plug And Play
- High Dielectric Strength Thermoplastic Cap with Brass Terminals
- Cap Is Sealed To Eliminate Corrosion
- Cap Is Vented To Remove Captured Heat
- Cap Traces Are Over molded To Eliminate Arc Over
- Rotor Blade Is Coated For Longer Life
- High Strength Dielectric Glass Filled Cap with Brass Contacts
- All New Unit with New Hardware
Cardone – New Ignition Distributor (Part No.F2000862923CAR)
from
$259.70
Based on over 40 years of making top-rated remanufactured products, we’ve seen where: and why:original parts fail. This unique, reverse-engineering expertise is the foundation of CARDONE Select Engineered (CSE) Technology. The CSE process identifies and corrects original design flaws, resulting in longer-lasting, reliable electronics parts.
Product Features:
See More
Product Features:
- CARDONE Select Engineered (CSE) Technology ensures that all distributors meet or exceed O.E. form, fit and function.
- The only NEW distributor in the aftermarket that is 100% computer tested for guaranteed, long-lasting performance.
- This distributor includes the cap and rotor to make installation a snap. Dust cover and gasket are also included on Honda applications.
- When CAM sizes are consolidated, the rotor number is placed on the unit to make service easy later on.
Spectra Premium – Distributor (Part No.GM10)
from
$132.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium distributors meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
- OE design cap and replacement rotor included for fast installation
- All units new, no rebuilds or core charges
- All unit components are computer tested to ensure full functionality
- Each new distributor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100701)
from
$371.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D100701 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Red Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
National – Multi Purpose Seal (Part No.100058)
from
$10.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; single-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
Felpro – Distributor Mounting Gasket (Part No.12665)
from
$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Popular 1959 Chevrolet Corvette Distributors Categories
1959 Chevrolet Corvette Distributors
Maybe you’re in the middle of a full rebuild of that 1959 Chevrolet Corvette. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 32 different Distributors in our inventory ranging from $2.29 to $481.99. That means you can find the exact parts or products you need to keep that 1959 Chevrolet Corvette running smoothly.
Distributors are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1959 Chevrolet Corvette. Felpro, Carquest, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Distributors for your 1959 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 56 reviews in this category, some of the top rated parts include Distributor Cap and Rotor; MSD/GM V8 Points with 2.3 stars and D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black with 1.0 stars.
So if you’re in the market for aftermarket Distributors to keep your 1959 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Distributors Brands To Make Your 1959 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1959 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Distributors brands and parts.
Popular Felpro Distributors
We carry Felpro parts in our stock across Distributor Small Parts categories, plus more. For a 1959 Chevrolet Corvette, our most popular Felpro Distributors include:
Top 1959 Chevrolet Corvette Distributors from Carquest
Carquest products are another trusted brand when it comes to Distributors for your 1959 Chevrolet Corvette. Popular Carquest parts include:
FAQs for 1959 Chevrolet Corvette Distributors
What are the most purchased Distributors for the 1959 Chevrolet Corvette?
Out of 32 Distributors for the 1959 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1959 Chevrolet Corvette Distributors?
Top-rated Distributors for your 1959 Chevrolet Corvette based on customer reviews/ratings are:
from
$46.99
(7)
Distributor Cap and Rotor; MSD/GM V8 Points
“I’ve used this on my 1969 Chevy Camaro Z/28 (DZ302) on an MSD distributor and works great. MSD puts out quality stuff.”
from
$41.99
(1)
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
“The slots made in the distributor cap for the wiring terminal blades do not have the correct clearance for the blades to be installed properly. The s”
from
$481.99
(1)
Distributor; Chevy V8 with Internal Module
“I bought one of these distributors Jan 2014. It worked well until a month ago when it stopped passing power to the spark plugs. I sent that one in to ”
