1959 Chevrolet Bel Air Drivetrains

Essential 1959 Chevrolet Bel Air Drivetrains

National – Bearings (Part No.LM603049)

Bearings

from

$12.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – Differential Carrier Gasket (Part No.RDS 5008)

Differential Carrier Gasket

from

$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

1330 Dual-Size Cap U/Joint

from

$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More

Pro-King – Differential Crush Sleeve (Part No.742G034)

Differential Crush Sleeve

from

$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

Dana 44 Pinion Gear Thrust Washer

from

$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

from

$109.99
12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
See More

Richmond Gear – RngPnn (Part No.69-0169-1)

RngPnn

from

$351.99
RngPnn

Yukon Gear – Chevy ’55-’64 Car And Truck Dropout Gasket (Part No.23017)

Chevy '55-'64 Car And Truck Dropout Gasket

from

$13.99
55P Chevy Passenger Drop Out gasket.

Product Features:
  • Cover gasket
  • Fits 1955-1964 GM passenger car
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

USA Standard Gear – 12 Bolt GM Spartan Locker Cross Pin (Part No.17023)

12 Bolt GM Spartan Locker Cross Pin

from

$49.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits GM 12 bolt car and truck and 9.5″ Toyota Landcruiser
  • Works with Spartan Locker or standard open spider gears
See More

National – Multi Purpose Seal (Part No.7412S)

Multi Purpose Seal

from

$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Powertrax – Grip LS Traction System (Part No.LS231230)

Grip LS Traction System

from

$480.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

from

$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1310 u-joint size
  • Includes two u-bolts and four nuts
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2002
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 3.50 INCH / 89 MM
  • MOUNT WIDTH: 1.50 INCH / 38 MM
  • COMPLETE MOUNT
See More

Yukon Gear – Master Overhaul Kit For ’64-’72 GM 8.2" Differential (Part No.14082)

Master Overhaul Kit For '64-'72 GM 8.2" Differential

from

$289.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits GM 8.2″
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)

Pinion Install Kit For GM 55P And 55T Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1955-1964 GM truck and passenger car
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

National – Multi Purpose Seal (Part No.6818)

Multi Purpose Seal

from

$21.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – Spider Gear Kit For GM 12 Bolt Car And Truck (Part No.39021)

Spider Gear Kit For GM 12 Bolt Car And Truck

from

$161.99
Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

from

$40.49
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Heat Treated
  • Nominally Rated At 200,000 Psi Tensile Strength
  • Specially Hardened, Precision Ground Washers
  • 3/8″-24 RH Thread Size
  • 0.8″ Underhead Length
  • 200,000 PSI
See More

Yukon Gear – Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)

Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design

from

$198.99
Yukon yoke for GM 12 bolt car & truck, 1310 u/joint size, u-bolt design. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 12 bolt passenger car and truck
  • 30 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

Standard Open Side Gear Thrust Washer For 8.5" GM

from

$15.99
Standard open side gear thrust washer for 8.5″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.5″
See More

National – Multi Purpose Bearing (Part No.HB-206-FF)

Multi Purpose Bearing

from

$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1959 Chevrolet Bel Air Drivetrains

You count on your 1959 Chevrolet Bel Air to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 84 Drivetrains ranging in price from $4.49 to $883.99, you’re sure to find everything you need for your 1959 Chevrolet Bel Air.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Moog, and Driveworks. 1959 Chevrolet Bel Air Drivetrains start as low as $4.49!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,962 extensive product reviews on 1959 Chevrolet Bel Air Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Universal Joint with 4.9 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1959 Chevrolet Bel Air below to get started!

Top-Rated Drivetrains Brands For Your 1959 Chevrolet Bel Air

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 Chevrolet Bel Air running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1959 Chevrolet Bel Air back on the road. Some of the top-rated Felpro products in these categories are:
Differential Carrier Gasket
from $5.29
(2)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1959 Chevrolet Bel Air Drivetrains

What are the most purchased Drivetrains for the 1959 Chevrolet Bel Air?

Out of 84 Drivetrains for the 1959 Chevrolet Bel Air, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1959 Chevrolet Bel Air Drivetrains?

Top-rated Drivetrains for your 1959 Chevrolet Bel Air based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Universal Joint
from $28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
Multi Purpose Seal
from $12.99
(5)
Multi Purpose Seal
“It seals great so far”