1958 Volkswagen Beetle Engine Parts
More 1958 Volkswagen Beetle Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1958 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1958 Volkswagen Beetle Engine Parts
Corteco – Engine Mount (Part No.A7000121461CFW)
from
$72.13
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise Vibration Control Brochure
Whiteline – Engine Pitch Mount Bushing (Part No.KDT977)
from
$160.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Anchor – Engine Mount: Rear, 1 Piece (Part No.9920)
from
$53.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; VW 06-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2021
- Weight approx: 1 Lbs
- ENGINE CRADLE
- HEIGHT: 1.22 INCH / 31 MM
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Rein – Engine Mount (Part No.AVE0363R)
from
$55.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Anchor – Engine Mount: Right, 1 Piece (Part No.10012)
from
$171.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 05-19;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2005-2019
- Weight approx: 5 Lbs
- HYDRAULIC
- COMPLETE MOUNT
- ARM INCLUDED
Rein – Engine Mount (Part No.AVE0381R)
from
$92.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Autopart International Inc – Engine Mount (Part No.A70003156777API)
from
$132.55
Engine Mount
Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-79HV)
from
$153.99
Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and ass
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues
Melling – Stock Replacement OE Type Oil Pump (Part No.M-79C)
from
$111.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement OE Type Oil Pump (Part No.M-79B)
from
$106.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-79AHV)
from
$161.99
Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and ass
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues
Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-79BHV)
from
$131.99
Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and ass
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues
Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-79CHV)
from
$145.99
Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and ass
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues
Melling – Stock Replacement OE Type Oil Pump (Part No.M367)
from
$146.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Dorman – Oil Drain Plug Volkswagen Strainer Kit (Part No.65238)
from
$11.29
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
- Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
- Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
Dorman – Filter Housing Cooler (Part No.918-140)
from
$67.99
This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
- Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Febi – Oil Cooler (Part No.A6070385019FEB)
from
$110.38
All Febi oil coolers are manufactured to meet OE specifications and depending on application are provided with a built-in thermo bypass, and/or pressure bypass.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced lightweight materials
- Low weight and design space requirements
- OE Style connections
NRF B.V. – NRF B.V. Oil Cooler (Part No.A607056557NRF)
from
$67.10
All NRF B.V. oil coolers are manufactured to meet OE specifications and depending on application are provided with a built-in thermo bypass, and/or pressure bypass.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced lightweight materials
- Low weight and design space requirements
- OE Style connections
Behr – Oil Cooler (Part No.A607056557BEH)
from
$68.15
The cooling of high-load motor oils by oil coolers or the guarantee of an almost constant temperature spectrum brings considerable advantages. Oil change intervals are extended and the engine service life is increased. A basic distinction is made between air-cooled and coolant-cooled types. Depending on requirements, this latter type can be installed in the coolant box or engine block or attached externally to the engine, gear, cooling module or oil filter housing. Behr’s latest design is a compact and powerful stack-disc oil cooler. Since it manages without coolant housing and is made completely of aluminum, its outstanding features are its low weight and design space requirements.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced materials
- Low weight and design space requirements
- OE Style connections and mounting hardware
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Febi – Oil Cooler (Part No.A6070233009FEB)
from
$61.80
All Febi oil coolers are manufactured to meet OE specifications and depending on application are provided with a built-in thermo bypass, and/or pressure bypass.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced lightweight materials
- Low weight and design space requirements
- OE Style connections
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$141.99
Product Features:
See More
- Imperial Econo-Kool« engine oil cooler kit
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
- Light duty applications
- All except Chevrolet V8 applications
- Lightweight construction with high-efficiency turbulators
Nissens – Oil Cooler (Part No.A6070923676NSS)
from
$61.81
All Nissens oil coolers are manufactured to meet OEM specifications and depending on application are provided with anodic coating, built-in thermo bypass, and/or pressure bypass.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced lightweight materials
- Low weight and design space requirements
- OE Style connections
Nissens – Nissens Oil Cooler (Part No.A6070233009NSS)
from
$109.09
All Nissens oil coolers are manufactured to meet OEM specifications and depending on application are provided with anodic coating, built-in thermo bypass, and/or pressure bypass.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced lightweight materials
- Low weight and design space requirements
- OE Style connections
APA/URO Parts – Oil Cooler (Part No.A6070309503APA)
from
$109.00
Oil Cooler
Popular 1958 Volkswagen Beetle Engine Parts Categories
1958 Volkswagen Beetle Engine Parts
You count on your 1958 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 6 Engine Parts ranging in price from $6.29 to $216.99, you’re sure to find everything you need for your 1958 Volkswagen Beetle.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 4 different brands like Imperial, Anchor, and Melling. 1958 Volkswagen Beetle Engine Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 8 extensive product reviews on 1958 Volkswagen Beetle Engine Parts.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1958 Volkswagen Beetle below to get started!
Top-Rated Engine Parts Brands For Your 1958 Volkswagen Beetle
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Imperial, Anchor, Melling, and even more.
Popular Imperial Engine Parts
You’ll find popular Imperial brand products across Oil Cooler Parts. All are waiting to get your 1958 Volkswagen Beetle back on the road. Some of the top-rated Imperial products in these categories are:
FAQs for 1958 Volkswagen Beetle Engine Parts
What are the most purchased Engine Parts for the 1958 Volkswagen Beetle?
Out of 6 Engine Parts for the 1958 Volkswagen Beetle, the most popular in our inventory are:
from
$6.29
This product is not rated
Transmission Mount: Right, Left, Front Left, Front Right, 1 Piece
Engine Mounts
