1958 GMC PM152 Performance and Racing Products
More 1958 GMC PM152 Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1958 GMC PM152, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1958 GMC PM152 Performance and Racing Products
Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7310)
from
$58.99
Product Features:
See More
- 4.125 in. Cylinder Bore Diameter
- 0.039 in. Thickness
- 8.7cc Volume
- Charcoal Color
- Two Piece Configuration
Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)
from
$85.39Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)
from
$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)
from
$473.99
Product Features:
See More
- Designed for Idle to 5500 RPM
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)
from
$504.99Product Features:
- Polished Version Of Edelbrock PN[2701]
- Polish is Hand-Buffed for Brilliant Shine
- Maximizes Performance with Edelbrock Carburetors
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Mr. Gasket – Water Pump (Part No.7011)
from
$279.99
This high flow pump is chrome plated cast iron and will keep your engine cool while looking cool.
Product Features:
See More
Product Features:
- Chrome Plated Cast Iron
- Heavy Duty Shaft & Bearings
- Dual Pulley Bolt Pattern
- Small Block Chevy – Short Style
- Tested for reliability
Mr. Gasket – Chrome Plated Engine Oil Pan (Part No.9781)
from
$89.99
This Mr. Gasket Oil Pan comes in chrome plated steel. Complete with drain plug, washer & bolts. Stock depth and capacity. Gasket & chrome-plated dipsticks with tubes sold separately.
Product Features:
See More
Product Features:
- Chrome plated steel
- Complete with drain plug, washer and bolts
- Stock depth and capacity
Popular 1958 GMC PM152 Performance and Racing Products Categories
1958 GMC PM152 Performance and Racing Products
You count on your 1958 GMC PM152 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 13 Performance and Racing Products ranging in price from $25.99 to $504.99, you’re sure to find everything you need for your 1958 GMC PM152.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 3 different brands like Edelbrock, Mr. Gasket, and Flowtech. 1958 GMC PM152 Performance and Racing Products start as low as $25.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 1958 GMC PM152 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Real-Seal; Header Gasket with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1958 GMC PM152 below to get started!
Top-Rated Performance and Racing Products Brands For Your 1958 GMC PM152
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 GMC PM152 running right for years to come. In our inventory you’ll find brands like Edelbrock, Mr. Gasket, Flowtech, and even more.
Popular Edelbrock Performance and Racing Products
You’ll find popular Edelbrock brand products across Performance Engines. All are waiting to get your 1958 GMC PM152 back on the road. Some of the top-rated Edelbrock products in these categories are:
from
$195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds
FAQs for 1958 GMC PM152 Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1958 GMC PM152?
Out of 13 Performance and Racing Products for the 1958 GMC PM152, the most popular in our inventory are:
from
$65.99
This product is not rated
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
Performance Engine Valve Springs
What are the top-rated 1958 GMC PM152 Performance and Racing Products?
Top-rated Performance and Racing Products for your 1958 GMC PM152 based on customer reviews/ratings are:
