1958 GMC PM151 Performance Engines

Essential 1958 GMC PM151 Performance Engines

Mr. Gasket – Water Pump (Part No.7011)

Water Pump

from

$279.99
This high flow pump is chrome plated cast iron and will keep your engine cool while looking cool.

Product Features:
  • Chrome Plated Cast Iron
  • Heavy Duty Shaft & Bearings
  • Dual Pulley Bolt Pattern
  • Small Block Chevy – Short Style
  • Tested for reliability
See More

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

from

$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Performer Small-Block Chevy Intake Manifold for Street Performance

from

$339.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

from

$195.99


Product Features:
  • Maximizes Performance with Edelbrock Carburetors
  • Runners Tuned to Match Square Bore Carburetor
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold

from

$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)

C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern

from

$473.99
Product Features:
  • Designed for Idle to 5500 RPM
  • Manifold has a Balanced 180+ Firing Order
  • Contains Exhaust Gas Heat Riser
  • Offers Excellent Performance Potential
  • Front Oil Filler Tube Boss Included
  • Carburetor Center-to-Center Dimensions = 5-1/2 in
  • Also Available Polished PN[5419] But Not Fit HEI
  • Use Rochester 2GC (small 1-7/16 in bore)
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$504.99


Product Features:
  • Polished Version Of Edelbrock PN[2701]
  • Polish is Hand-Buffed for Brilliant Shine
  • Maximizes Performance with Edelbrock Carburetors
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
See More

Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7310)

Cylinder Head Gasket Set for Chevrolet

from

$58.99
Product Features:
  • 4.125 in. Cylinder Bore Diameter
  • 0.039 in. Thickness
  • 8.7cc Volume
  • Charcoal Color
  • Two Piece Configuration
See More

1958 GMC PM151 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1958 GMC PM151. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 9 different Performance Engines in our inventory ranging from $58.99 to $504.99. That means you can find the exact parts or products you need to keep that 1958 GMC PM151 running smoothly.

Performance Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1958 GMC PM151. Edelbrock and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1958 GMC PM151, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1958 GMC PM151 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1958 GMC PM151 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 GMC PM151 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your PM151 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1958 GMC PM151, our most popular Edelbrock Performance Engines include:
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
from $195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds

FAQs for 1958 GMC PM151 Performance Engines

What are the most purchased Performance Engines for the 1958 GMC PM151?

Out of 9 Performance Engines for the 1958 GMC PM151, the most popular in our inventory are:
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
from $65.99
This product is not rated
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
Performance Engine Valve Springs
Performer Small-Block Chevy Intake Manifold for Street Performance
from $339.99
This product is not rated
Performer Small-Block Chevy Intake Manifold for Street Performance
Performance Intake Manifolds
C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern
from $473.99
This product is not rated
C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern
Performance Intake Manifolds