1958 GMC 150 Fuel and Emissions Systems
Find Your Specific 1958 GMC 150 Fuel and Emissions Systems
Below you will find various in-demand GMC Fuel and Emissions Systems, components and accessories for your 1958 150. Advance Auto Parts has popular 150 parts like Gas Caps, Exhaust Gas Recirculation (EGR) Parts, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 150 model years including
1951,
1952,
1953,
1954,
1955,
1956,
1957,
1959 and more. Select a category of 1958 GMC 150 Fuel and Emissions Systems below and start saving instantly.
Popular 1958 GMC 150 Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1958 GMC 150s
Carquest Premium – Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10623)
from
$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Upgrade your 1958 GMC 150 with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1958 GMC 150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Fuel and Emissions Systems for the 1958 GMC 150, designed to meet your needs without breaking the bank.
From
Gas Cap
replacements to
Exhaust Gas Recirculation (EGR) Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1958 GMC 150 at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $10.99 to $211.99, with
an average price of $70.37.
Our 10 Fuel and Emissions Systems in stock come from 4 trusted brands, so you’re sure to find the right part for your 1958 GMC 150 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 GMC 150, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Carquest Premium, Mr. Gasket, Edelbrock, and more.
Carquest Premium Fuel and Emissions Systems
start at just $12.99 and boast an impressive 4 stars average rating from customers.
Mr. Gasket and Edelbrock also bring quality to the table, with Fuel and Emissions Systems available starting at $34.99, and at an average 4 stars rating.
With 194 customer reviews and counting, our 1958 GMC 150 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1958 GMC 150 is always ready to roll. We’re committed to providing you with everything you need to keep your 150 in top shape, all in one place.
Start shopping confidently below for your 1958 GMC 150!
Best-Selling Gas Caps for 1958 GMC 150s
Enhance the driving experience in your GMC with 2 quality Gas Cap components, starting at $12.99.
Carquest Premium – Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10623)
from
$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Most Popular 1958 GMC 150 Exhaust Gas Recirculation (EGR) Parts
Customize your GMC with 1 Exhaust Gas Recirculation (EGR) Parts products
like EGR Valve Adapters, all
priced under $83.99.
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Top Picks for 1958 GMC 150 Fuel Pumps
Upgrade GMC 150s with top-quality Fuel Pumps parts, including 6 OEM and aftermarket selections for your 1958 model.
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
In-Demand Fuel Rails for 1958 GMC 150s
Select from 1 premium Fuel Rails parts for your 1958 GMC 150.
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Top-Rated Fuel and Emissions Systems Brands For Your 1958 GMC 150
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1958 GMC 150s. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, Mr. Gasket, and Edelbrock, and more. Fuel and Emissions Systems from these brands that fit a 1958 150 start at just $12.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1958 GMC 150 Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1958 GMC 150, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1958 GMC 150. With over 2 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $18.99. Plus, with over 9 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$12.99
$12.99
(9)
Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“Emergency replacement of missing gas cap”
from
$24.99
$24.99
This product is not rated
Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“”
Popular Mr. Gasket 1958 GMC 150 Fuel and Emissions Systems
Mr. Gasket auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1958 GMC 150 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1958 150, Advance Auto Parts carries a full inventory of 1 Mr. Gasket Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these Mr. Gasket Fuel and Emissions Systems range up to $64.99, plus, with more than 37 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 1958 GMC 150 Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1958 GMC 150s?
Out of 10 Fuel and Emissions Systems that fit 1958 GMC 150s, the following parts are the top sellers:
- Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (18481448) – $24.99
- Performer RPM Series fuel pump for SBC and W Series Chevy (17140009) – $168.99
- EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (6340091) – $83.99
What’s the price range for 1958 GMC 150 Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1958 GMC 150 start at $10.99 and go up to $211.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1958 GMC 150?
The average price for Fuel and Emissions Systems for the 1958 GMC 150 is $70.37. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC 150 model years?
What are the cheapest Fuel and Emissions Systems for my 1958 GMC 150?
The cheapest 1958 GMC 150 Fuel and Emissions Systems we carry in stock are:
- For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (11530006) – $10.99
- Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (18481482) – $12.99
- Chrome Moly (11530123) – $22.99
- Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (18481448) – $24.99
- Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (12257407) – $34.99
What are the top-rated Fuel and Emissions Systems that fit the 1958 GMC 150?
Out of 194 reviews by customers, our 1958 GMC 150 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1958 GMC 150 and their top-rated products:
- Gas Caps
- Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (18481482) – $12.99
What types of Fuel and Emissions Systems do you sell for my 1958 GMC 150?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1958 GMC 150:
Can I get help with 1958 GMC 150 Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.
What is your return policy for GMC 150 Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new GMC 150 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
