1958 Chrysler New Yorker Filters and PCVs
More 1958 Chrysler New Yorker Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 1958 Chrysler New Yorker, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 1958 Chrysler New Yorker Filters and PCVs
FRAM Drive – Engine Air Filter: Standard, Meets or Exceeds Manufacturer Specifications (Part No.FDA160)
from
$11.29
FRAM Drive engine air filter prevents damaging road dust and dirt particles from entering your vehicle’s engine. Replacing your engine air filter every 12 months can help improve acceleration and optimizes overall engine efficiency.
Product Features:
See More
Product Features:
- Proven performance for up to 12 months
- Installs quickly in as little as 5 minutes
- Provides trusted protection by trapping dirt, dust, and other harmful contaminants
Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R87020)
from
$8.49
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More
Carquest Premium – Air Filter (Part No.87044)
from
$9.99
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
Purolator ONE – PurolatorONE Air Filter (Part No.A13192)
from
$13.49
Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE┐ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier
See More
Imperial – Remote Mount Filter Kit – Universal (Part No.240291)
from
$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.
Product Features:
See More
Product Features:
- Remote mount filter kit
- For use when relocation of the oil filter is necessary
- Comes with all necessary hardware except hoses
Carquest Premium – Oil Filler Cap (Part No.10070)
from
$21.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Carquest Premium – Engine Oil Filler Cap: 10061, Push Fit, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10061)
from
$12.49
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Carquest Premium – Oil Filler Cap (Part No.10075)
from
$8.79
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
FRAM Titanium – Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles (Part No.FS3614)
from
$12.99
FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.
Product Features:
See More
Product Features:
- Proven protection for up to 20,000 miles
- Total Grip textured surface for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Powerflow technology allows for efficient oil flow over the filter media
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85381)
from
$5.99
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.
See More
Mobil 1 – MOBIL 1 – OIL FILTER (Part No.M1-301A)
from
$16.99
Mobil 1¿ Extended Performance Oil Filters are built with strong, durable components and are tested and proven to protect 2X as long as auto manufacturers¿ recommended oil change intervals. A high-efficiency synthetic blend media removes over 99% of harmful contaminants keeping oil cleaner, longer. Enhanced nitrile gasket remains pliable to help prevent oil leaks while a durable anti-drain back valve protects against dry starts. Durable, heavy-duty filter canister withstands 9X the normal vehicle oil system operating pressure. These are just some of the advanced technologies that go into making an oil filter that can provide proven protection for up to one full year or 20,000 miles. Meets requirements of the Mobil 1¿ annual protection limited warranty.
Product Features:
See More
Product Features:
- Protects for 20,000 Miles or up to 1 year – GUARANTEED*
- Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
- Removes over 99% of contaminants – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
- Heavy duty canister withstands 9x the normal vehicle oil system operating pressure
- Designed for use with all engine oil types and brands
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85348)
from
$5.49
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.
See More
Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-300)
from
$8.79
The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
Product Features:
See More
Product Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
Purolator – Fuel Filter (Part No.F53190)
from
$22.99
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Fram – In-Line Gasoline Filter (Part No.G3587)
from
$7.79
This high-volume accessory is designed to promote efficient fuel injection performance. FRAM® offers exceptional domestic and import fuel filter coverage to meet the needs of virtually all engine configurations.
Product Features:
See More
Product Features:
- Designed for use in modern fuel injection systems and with oxygenated fuels
Purolator – Fuel Filter (Part No.F44705)
from
$29.99
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Purolator – Fuel Filter (Part No.F29160)
from
$4.49
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Purolator – Fuel Filter (Part No.F43176)
from
$14.49
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.
Product Features:
See More
Product Features:
- Removes water from the fuel system
- Prevents rust and corrosion in your engine
- Keeps fuel contaminant free
- Replace annually for peak performance
- Meets or exceeds OE specifications
Accufit – Oil Drain Plug, 1/2"-20 (Part No.ODP-00016B)
from
$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.
Product Features:
See More
Product Features:
- Easy Install – Finger-grip wing for ease of installation
- All plugs have 14mm hex – just one wrench works for all
- Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
Dorman – Pilot Point Engine Oil Drain Plug: 43832, Unified National Fine Thread, 5/8 " Head, 1 Pack (Part No.090-058CD)
from
$9.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No.090-075CD)
from
$4.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Pilot Point Engine Oil Drain Plug: 1/2-20 Thread, 5/8 " Head, 1 Pack (Part No.090-058.1)
from
$5.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Pilot Point Engine Oil Drain Plug: 1/2 " -20, Unified National Coarse Thread, 9/16 " Head, 1 Pack (Part No.090-052CD)
from
$4.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Mahle – Oil Drain Plug Gaske (Part No.A6120121244MAH)
from
$1.91
Oil Drain Plug Gaske
Dorman – Crush Drain Plug Gasket, Fits 1/2So, M14 (Part No.095-141CD)
from
$4.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Oil Pan Drain Plug Washers (Part No.16)
from
$14.99
Mr. Gasket manufactures a variety of performance parts and accessories, including carburetor and fuel accessories, cooling system accessories, engine components, fasteners, gaskets, and suspension and drive line components. Besides gaskets and fasteners, the Mr. Gasket brand provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools and suspension and driveline components. Mr .Gasket also includes Ultra-Seal gaskets and fasteners.
Product Features:
See More
Product Features:
- Replacement part
- For nylon oil pan drain plug
- Skin packaged
Dorman – Oil Drain Plug Gasket – Nylon Fits 1/2 Inch TO, 5/8 Inch M14 SO, M16 (sold by each) (Part No.097-002)
from
$7.99
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Nylon Drain Plug Gasket, Fits 1/2,M12 (1 In., 25mm Od) (Part No.097-022CD)
from
$4.49
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1958 Chrysler New Yorker Filters and PCVs Categories
1958 Chrysler New Yorker Filters and PCVs
You count on your 1958 Chrysler New Yorker to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 8 Filters and PCVs ranging in price from $1.29 to $95.99, you’re sure to find everything you need for your 1958 Chrysler New Yorker.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 5 different brands like Carquest Premium, GM Genuine Parts, and Imperial. 1958 Chrysler New Yorker Filters and PCVs start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 1958 Chrysler New Yorker Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are HD By-Pass Lube Cartridge with 5.0 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1958 Chrysler New Yorker below to get started!
Top-Rated Filters and PCVs Brands For Your 1958 Chrysler New Yorker
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 Chrysler New Yorker running right for years to come. In our inventory you’ll find brands like Carquest Premium, GM Genuine Parts, Imperial, and even more.
Popular Carquest Premium Filters and PCVs
You’ll find popular Carquest Premium brand products across Positive Crankcase Ventilation (PCV) Parts. All are waiting to get your 1958 Chrysler New Yorker back on the road. Some of the top-rated Carquest Premium products in these categories are:
from
$12.49
(4)
Engine Oil Filler Cap: 10061, Push Fit, Direct Fit, Provides Tight Seal, 1 Pack
Oil Breather Caps
FAQs for 1958 Chrysler New Yorker Filters and PCVs
What are the most purchased Filters and PCVs for the 1958 Chrysler New Yorker?
Out of 8 Filters and PCVs for the 1958 Chrysler New Yorker, the most popular in our inventory are:
from
$13.49
This product is not rated
Engine Air Filter 87030: Removes up to 99% of Dirt & Debris
Air Filters
What are the top-rated 1958 Chrysler New Yorker Filters and PCVs?
Top-rated Filters and PCVs for your 1958 Chrysler New Yorker based on customer reviews/ratings are:
