1958 Chevrolet Truck Distributors

Essential 1958 Chevrolet Truck Distributors

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Accel – Adj:Vac Adv GM V8 Point Dist (Part No.31034)

Adj:Vac Adv GM V8 Point Dist

from

$54.39
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.

Product Features:
  • Adjustable Vacuum Advance
  • Increases Horsepower And Throttle Response
  • Includes Allen Wrench For Adjustments
  • Instantly Increase Horsepower
  • Maximum Possible Spark Advance
  • Not Legal For Sale/Use In CA
See More

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

D701700 Vacuum Canister for Flame-Thrower Billet Distributor

from

$36.99


Product Features:
  • PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister

from

$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Distributor Mounting Gasket (Part No.12665)

Distributor Mounting Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ACDelco – Ignition Distributor Cap (Part No.D308R)

Ignition Distributor Cap

from

$24.29
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

PerTronix – D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor (Part No.D650701)

D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

Carquest – Distributor Cap (Part No.C158)

Distributor Cap

from

$18.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
  • Distributor cap has aluminum terminals to match OE performance.
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)

D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600710)

D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

Carquest Premium – Distributor T1835: 100% New, With Cap and Rotor (Part No.T1835)

Distributor T1835: 100% New, With Cap and Rotor

from

$129.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100811 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Accel – Dist:Chev V8 Hei Vac 265-454 (Part No.59130)

Dist:Chev V8 Hei Vac 265-454

from

$115.99
ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesn’t break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • All New Cast Aluminum Housings for durability
  • OEM Style Ignition Modules for Trouble-Free Service
  • High-Quality Distributor Gears
  • Long Sintered Bushings for Long Life
  • Distributor Cap w/Brass Terminals
  • Includes Performance Coil
  • Fit non computerized vehicles
See More

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

Distributor; Chevy V8 with Internal Module

from

$469.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:
  • Simple and clean three wire installation
  • Supplied w/An HEI Style Distributor Cap And Rotor
  • Accepts Cap-A-Dapts
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved
  • Now includes built-in Rev Limiter
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3748201)

Unilite Electronic Ignition Distributor Series 37

from

$437.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Carquest – Distributor Rotor (Part No.D138)

Distributor Rotor

from

$7.05
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Carquest – Distributor Rotor (Part No.23A1019)

Distributor Rotor

from

$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Rotor (Part No.DAA1023)

Distributor Rotor

from

$7.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1025)

Distributor Rotor

from

$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1033)

Distributor Rotor

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Distributor Rotor

from

$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

1958 Chevrolet Truck Distributors

Maybe you’re in the middle of a full rebuild of that 1958 Chevrolet Truck. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 42 different Distributors in our inventory ranging from $1.49 to $472.99. That means you can find the exact parts or products you need to keep that 1958 Chevrolet Truck running smoothly.

Distributors are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Chevrolet Truck. Felpro, Carquest, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1958 Chevrolet Truck, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 205 reviews in this category, some of the top rated parts include Distributor T1835: 100% New, With Cap and Rotor with 2.0 stars and D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black with 1.0 stars.

So if you’re in the market for aftermarket Distributors to keep your 1958 Chevrolet Truck rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1958 Chevrolet Truck Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Chevrolet Truck demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Truck the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Felpro Distributors

We carry Felpro parts in our stock across Distributor Small Parts categories, plus more. For a 1958 Chevrolet Truck, our most popular Felpro Distributors include:
DISTRIBUTOR MOUNTING GASKET
from $2.29
(5)
DISTRIBUTOR MOUNTING GASKET
Distributor Small Parts

Top 1958 Chevrolet Truck Distributors from Carquest

Carquest products are another trusted brand when it comes to Distributors for your 1958 Chevrolet Truck. Popular Carquest parts include:
Distributor Cap
from $18.05
(9)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $7.05
(5)
Distributor Rotor
Distributor Rotor Buttons

FAQs for 1958 Chevrolet Truck Distributors

What are the most purchased Distributors for the 1958 Chevrolet Truck?

Out of 42 Distributors for the 1958 Chevrolet Truck, the most popular in our inventory are:
Ignition Distributor Cap
from $24.29
This product is not rated
Ignition Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $6.99
This product is not rated
Distributor Rotor
Distributor Rotor Buttons
Distributor Cap
from $16.99
This product is not rated
Distributor Cap
Distributor Cap Kits

What are the top-rated 1958 Chevrolet Truck Distributors?

Top-rated Distributors for your 1958 Chevrolet Truck based on customer reviews/ratings are:
Distributor T1835: 100% New, With Cap and Rotor
from $129.99
(1)
Distributor T1835: 100% New, With Cap and Rotor
“I purchased this distributor for a period-correct build with a 400hp 350 Chevy, but my review applies to even stock lower-hp engines. The distributor ”
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
from $41.99
(1)
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
“The slots made in the distributor cap for the wiring terminal blades do not have the correct clearance for the blades to be installed properly. The s”
Distributor; Chevy V8 with Internal Module
from $469.99
(1)
Distributor; Chevy V8 with Internal Module
“I bought one of these distributors Jan 2014. It worked well until a month ago when it stopped passing power to the spark plugs. I sent that one in to ”