1958 Chevrolet Brookwood Valve Cover and Cylinder Heads
More 1958 Chevrolet Brookwood Valve Cover and Cylinder Heads
Find your specific 1958 Chevrolet Brookwood original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1958 Chevrolet Brookwood Valve Cover and Cylinder Heads
Spectre – Valve Cover (Part No.5321)
from
$8.99
Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 Small Block engines
- Features a triple chrome-plated finish
- Constructed from heavy gauge steel
- Engineered to improve valve cover seal
Edelbrock – VALVE COVER TAB (Part No.4426)
from
$10.99
The Edelbrock #4426 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.
Product Features:
See More
Product Features:
- 5 in Length
- Steel Material
- For Small-Block Chevy
- Chrome Finish
- Set of 4
Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)
from
$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Dorman – Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm (sold by each) (Part No.693-005)
from
$2.99
Our Engine Rocker Arm Bolts are manufactured with a high corrosion resistance for an extended service life. Long-lasting durability is ensured.
Product Features:
See More
Product Features:
- Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm
- Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm (sold by each)
- Our Engine Rocker Arm Bolts are manufactured with a high corrosion resistance for an extended service life. Long-lasting durability is ensured.
- High-quality steel construction
- Resistant to rust
Mr. Gasket – Valve Cover (Part No.9803)
from
$92.99
Chrome plated steel valve covers have a flat smooth top. Available for numerous applications.
Product Features:
See More
Product Features:
- Flat/smooth top
- Designed to hold valve cover gasket in position
- Made from grade 5 steel
- Long lasting durability
- Cadmium plated to resist corrosion
- Easy installation
Spectre – Valve Cover (Part No.5258)
from
$39.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this 3-hole valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for 1958-1986 Chevrolet Small Block 265-400 engines
- Baffled for breather system compatibility
- Sold in pairs
- Triple chrome-plated steel construction
- Stock height
- Features OEM style sealing edge
Spectre – Valve Cover (Part No.5210)
from
$79.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this tall profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for 1958-1986 Chevrolet Small Block 265-400 engines
- Baffled for breather system compatibility
- Sold in pairs
- Triple chrome-plated steel construction
- Tall profile
- Features OEM style sealing edge
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8651 PT)
from
$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7302)
from
$62.99
Product Features:
See More
- 4.37 in. Cylinder Bore Diameter
- 0.039 in. Thickness (Rect. Port)
- 0.38 in. Thickness (Oval Port)
- 9.7cc Vol. (Rect. Port)/10.05cc Vol. (Oval Port)
- Two Piece Configuration
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8364 PT)
from
$27.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PermaTorque head gaskets meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Built to exceed all original equipment specifications
- Provides the robust seal needed to contain peak combustion pressures and temperatures
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)
from
$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)
from
$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 Psi Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
Edelbrock – RPM Small-Block Chevy Straight Spark Plug 70cc Hydraulic Roller Cam (Part No.60735)
from
$1024.99
The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performa
Product Features:
See More
Product Features:
- Complete Single For Mechanical Flat Tappet
- 70cc Combustion Chamber Volume
- 195cc Intake/65cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Edelbrock – RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam (Part No.60459)
from
$1233.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- Designed For Street/High Performance Big Blocks
- Specially Designed Oval Ports
- Highly Efficient Semi-Open Style Chamber
- High Velocity Short Intake Ports
- Fit GM Mark IV; Gen V; and Gen VI Blocks
- Complete Head with 2.19 (i) ; 1.88 (e) Valves
- Also Available in Polished Finish; See PN[604519]
Spartan – Engine Cylinder Head; Chev 350 69-85 Cyl Head (Part No.2C09)
from
$341.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)
from
$1009.99
Product Features:
See More
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- 64cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Spartan – Engine Cylinder Head; Chev 350 68-79 Cyl Head (Part No.2C17)
from
$366.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam (Part No.60899)
from
$1192.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 64cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5823)
from
$152.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Sealed Power – Engine Valve Spring (Part No.VS-677)
from
$2.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Popular 1958 Chevrolet Brookwood Valve Cover and Cylinder Heads Categories
1958 Chevrolet Brookwood Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1958 Chevrolet Brookwood. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 18 different Valve Cover and Cylinder Heads in our inventory ranging from $10.99 to $1,550.99. That means you can find the exact parts or products you need to keep that 1958 Chevrolet Brookwood running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Chevrolet Brookwood. Spectre, Edelbrock, and ARP Auto Racing are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1958 Chevrolet Brookwood, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1958 Chevrolet Brookwood rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1958 Chevrolet Brookwood Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Chevrolet Brookwood demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Brookwood the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Edelbrock Valve Cover and Cylinder Heads
We carry Edelbrock parts in our stock across Cylinder Heads categories, plus more. For a 1958 Chevrolet Brookwood, our most popular Edelbrock Valve Cover and Cylinder Heads include:
from
$990.99
(1)
RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam
Cylinder Heads
FAQs for 1958 Chevrolet Brookwood Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1958 Chevrolet Brookwood?
Out of 18 Valve Cover and Cylinder Heads for the 1958 Chevrolet Brookwood, the most popular in our inventory are:
from
$65.99
This product is not rated
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
Engine Valve Springs
from
$119.99
This product is not rated
For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile
Cylinder Head Bolt Sets
