1958 Chevrolet Brookwood Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1958 Brookwood. Advance Auto Parts has popular Brookwood parts like Engine Gaskets and Seals, Engine Timing Parts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Brookwood model years including 1959, 1960, 1961, 1969, 1970, 1971, 1972 and more. Select a category of 1958 Chevrolet Brookwood Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1958 Chevrolet Brookwood Engine Parts Categories

OE Engine Oil Coolers

Cylinder Head Bolt Sets

Timing Covers

Engine Mounts

Cylinder Head Gaskets

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Timing Cover Repair Sleeves

Valve Cover Load Spreaders

Main Bearing Repair Sleeves

Oil Pump Nylon Shaft Guides

Engine Cylinder Head Nuts

Engine Timing Cover Bolt Sets

Engine Oil Deep Sump Kits

Essential Engine Parts for 1958 Chevrolet Brookwoods

from

$40.99

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
Bolt Kits Come With Washers
Stud Kits Come Complete With A Special Locking
Easily Installed Without The Worry Of Cross-Threading

from

$3.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$29.99

The Edelbrock #4414 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Product Features:

Not For Center Bolt Covers
Steel Material
For Big-Block Chevy
Chrome Finish
Set of 7

from

$28.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$354.99

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.

Product Features:

Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
Manufactured From 8740 Chrome Moly Steel
Heat Treated To 200,000 Pounds Per Square Inch
Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
200,000 PSI
Sold As A Kit

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$191.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling
Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$18.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$61.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$18.79

Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Product Features:

Fits Chevy Small Block 1955-79 283-400 CID
Block Mounted
Chrome Plated Steel

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$302.99

Product Features:

Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
Top cover surface may be used for engraving your name horizontally
Deep heat dissipating fins
Cast aluminum construction for even gasket sealing
Satin Black finish

from

$51.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$209.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$8.99

you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:

Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
Premium Grade Oil Pump Stud
The Studs Come With Flat Washers And Nuts
Black Oxide Finished 8740

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$3.29

Made In USA. Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.

Product Features:

Manufactured from high quality nylon for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$47.49

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$101.99

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Shank O.D. .540″
Includes Locks and Hex Wrench
High-Quality Grade Steel
Heat-Treated For Ex Strength
Plated With Durable Gold Tone Finish

from

$549.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$379.99

The COMP Cams Three-Piece Billet Aluminum Timing Cover for Small Block Chevrolet engines allows access to the camshaft timing adjustments without having to remove the harmonic damper or disturb the oil pan seal. Designed to be lightweight yet rigid, this billet cover offers convenience and performance in one easy-to-install package.

Product Features:

Allows access to the camshaft timing adjustments without having to remove the harmonic damper or disturb the oil pan seal
Lightweight yet rigid
Easy to install
For Small Block Chevrolet applications

from

$36.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$95.99

ENGINE TIMING SET

from

$24.99

Product Features:

2.19 in.
Ductile Iron Material
Intake
Sold Individually
Made In The USA

from

$19.99

Product Features:

Valve Seats
Performer Series
50-State Street Legal

Upgrade your 1958 Chevrolet Brookwood with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1958 Chevrolet Brookwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Brookwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 141 Engine Parts for the 1958 Chevrolet Brookwood, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1958 Chevrolet Brookwood at great prices. Our Engine Parts inventory for this model ranges from just $1.79 to $1,886.00, with an average price of $235.78. Our 141 Engine Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 1958 Chevrolet Brookwood without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 Chevrolet Brookwood, we stock popular OEM and aftermarket Engine Parts from top names like Edelbrock, Melling, National, and more. Edelbrock Engine Parts start at just $64.99 and boast an impressive 4.4 stars average rating from customers. Melling and National also bring quality to the table, with Engine Parts available starting at $3.29, and at an average 4.3 stars rating. With 141 customer reviews and counting, our 1958 Chevrolet Brookwood Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1958 Chevrolet Brookwood is always ready to roll. We’re committed to providing you with everything you need to keep your Brookwood in top shape, all in one place. Start shopping confidently below for your 1958 Chevrolet Brookwood!

Best-Selling Engine Gaskets and Seals for 1958 Chevrolet Brookwoods

Enhance the driving experience in your Chevrolet with 2 quality Engine Gaskets and Seal components, starting at $29.99.

show more show less

from

$37.99

Product Features:

Valve Cover Gasket

from

$29.99

GASKETS

Most Popular 1958 Chevrolet Brookwood Engine Timing Parts

Customize your Chevrolet with 6 Engine Timing Parts products like Timing Sets, Timing Covers, and Timing Cover Seals, all priced under $178.99.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$82.99

Features 3 ways of optional timing adjustment. The Zoom Timing Gear Set features nodular iron sprockets and a dual-row roller chain for accuracy and durability.

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$34.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$19.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$178.99

Product Features:

Keyway Adjustable
Double Roller Timing Chain Type
Induction Hardened Billet Steel Material
9-Keyway Setting Points
For Chevys Opperating in 6500-8500 RPM Range

Top Picks for 1958 Chevrolet Brookwood Valve Cover and Cylinder Heads

Upgrade Chevrolet Brookwoods with top-quality Valve Cover and Cylinder Heads parts, including 95 OEM and aftermarket selections for your 1958 model.

show more show less

from

$64.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$1041.00

Product Features:

Out-of-the-Box Bolt-On Performance
With Straight Plugs
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$936.99

Product Features:

64cc combustion chamber with 200cc intake runner
2.02 in. intake and 1.60 in. exhaust valves
Flat Tappet Camshaft Type
Exhaust And Intake 45 Degree Seat Angle
Sold as one complete head

from

$572.99

COMP Cams Pro Magnum Hydraulic Lifters are specifically designed to perform at higher engine speeds. When engines are equipped with conventional hydraulic lifters, high RPM is limited by improper positioning of the internal piston. Pro Magnum Lifters eliminate improper positioning and harmful “pumping up.” COMP Cams Pro Magnum Hydraulic Lifters offer a significant power increase over standard high performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used. An adjustable valve train is required to use Pro Magnum Hydraulic Lifters.

Product Features:

.842″ diameter; 99g weight; 1.93″ seat height
Specifically designed to perform at higher engine speeds with significant power increase over standard hydraulic lifters
Proper position of internal piston at higher rpm prevents lifters form harmful “pumping up”
Adjustable valve train required
Pre-load lifters .002″-.004″ with engine warm

from

$18.99

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$69.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$534.99

With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Product Features:

Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
Designed for hydraulic roller cams
.625″ maximum lift, 1.310″ O.D.
Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others

from

$136.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$109.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$209.99

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

Sportsman Solid Roller Lifter Set with Bushing for Chevrolet Small Block

from

$1886.00

Sportsman Lifters from COMP Cams are designed to be a premium and lighter weight upgrade over Endure-X Lifters and a value alternative to the Elite Race option. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing axle/wheel design or an optional bronze bushing axle/wheel setup. And for Chevrolets, there are also left or right offset pushrod seat options. Each design features two pressurized EDM oil feeds to the axle, along with an edge orifice feed to the wheel. This design delivers a more reliable oil feed than most other options on the market. Sportsman Lifters also feature a shallower oil band than competitors’ versions for increased strength and rigidity, while internal machining helps to reduce weight. The body design utilizes a skirted wheel that strengthens the lifter ears and also provides more contact area with the lifter bore for further lifter stability. In addition, staked axles eliminate clips and provide robust axle retention. This permanent axle retention feature increases the stiffness of the lifter ears and helps prevent the ears from spreading. Sportsman Lifters are built from 8620 premium steel for increased strength and wear resistance and feature a captured link bar design. They utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. The lifters also feature a tall body to enable use in both standard and .300″ tall lifter bores – the result is increased strength and less lifter bore wear.

from

$1655.00

The Edelbrock #5085 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai

Product Features:

Complete Pair For Hydraulic Flat Tappet
64cc Combustion Chamber Volume
210cc Intake/75cc Exhaust Runner Volume
2.08 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1655.00

The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai

Product Features:

Complete Pair For Mechanical Flat Tappet
64cc Combustion Chamber Volume
210cc Intake/75cc Exhaust Runner Volume
2.08 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1628.99

The Edelbrock #60819 Performer RPM cylinder head is designed for 1958-1965 Chevrolet “W” Series 348/409 big-block applications. The Edelbrock #60819 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where sea

Product Features:

16cc chambers with 220cc intake ports
Size of intake valve is 2.19 in. and exhaust valve is 1.72 in.
Angled plugs for superior combustion
May be used on 348 engines with valve lifts up to .550 in. only
Flat Tappet Camshaft Type

from

$1332.99

The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
70cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

Sportsman Solid Roller Lifter Set with Bearing for Chevrolet Small Block

from

$1321.00

from

$1292.00

The Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
64cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1242.00

from

$1047.00

16 Springs

from

$756.99

16 Springs

from

$724.99

16 Springs

In-Demand Camshafts for 1958 Chevrolet Brookwoods

Select from 3 premium Camshafts parts for your 1958 Chevrolet Brookwood, with prices ranging from $6.99 to $544.99.

show more show less

Rollin' Thunder Camshaft for 1957-86 Small-Block Chevy 265-350 V8

from

$544.99

Edelbrock Rollin’ Thunder Camshaft No. 2208 is designed for 265-350 V8 Chevy engines from 1957-86 and produces optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 363HP and 402 Ft Lbs of Torque when paired with Performer EPS intake manifold No. 2716, Performer Carb No. 1407, Performer E-Tec cylinder heads No. 60975 and Edelbrock roller tappet lifter set No. 97423. Must be used with a thrust button. Camshaft specifications: – Intake duration: 212 Degrees – Exhaust duration: 222 Degrees – Intake lift: .462″ – Exhaust lift: .479″ – Lobe separation: 112 Degree – Intake Center Line: 107 Degree – Vacuum: 16″

from

$474.99

CAMSHAFTS

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

Most Sold 1958 Chevrolet Brookwood Engine Mounts

Explore our best-selling Chevrolet parts for the 1958 Brookwood among 2 OEM and aftermarket options starting from $7.29.

show more show less

from

$7.29

Anchor 2142 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1973
Weight approx: 2 Lbs
Without Interlock
Part Group: 2142, 2142

from

$12.99

Anchor 2267 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1973
Weight approx: 2 Lbs
With Interlock
Part Group: 2267, 2267

Top-Rated Engine Parts Brands For Your 1958 Chevrolet Brookwood

Shop for the best-rated brands offering Engine Parts and other products for your 1958 Chevrolet Brookwoods. Below you’ll find some of our best rated Engine Parts from Edelbrock, Melling, and National, and more. Engine Parts from these brands that fit a 1958 Brookwood start at just $3.29 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Edelbrock 1958 Chevrolet Brookwood Engine Parts

When it comes to maintaining or upgrading your 1958 Chevrolet Brookwood, using quality Engine Parts is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Engine Parts, specifically designed for the 1958 Chevrolet Brookwood. With over 3 Edelbrock brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $64.99, with an average price of just $680.99. Plus, with over 4 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $936.99

(1)

E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam

“Edelbrock Etec 200 Vortec aluminum small block Chevrolet heads. These are approximately 20lbs less weight per a head than the stock ones I am replacin”

from $64.99

(2)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”

from $1041

(1)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

“Great performance and look at a great price”

Popular Melling 1958 Chevrolet Brookwood Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 1958 Chevrolet Brookwood owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 1958 Brookwood, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Melling Engine Parts range from $3.29 to $43.99, plus, with more than 25 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $43.99

(13)

Stock Replacement OE Type Oil Pump

“Easy to install”

from $3.29

(5)

Stock Replacement Oil Pump Shaft Guide

“This is what I needed. The only one around in New York that I could find…….”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

FAQs for 1958 Chevrolet Brookwood Engine Parts

Which Engine Parts are best-sellers for 1958 Chevrolet Brookwoods?

Out of 141 Engine Parts that fit 1958 Chevrolet Brookwoods, the following parts are the top sellers:

Multi-Purpose Seal (3271684) – $17.99
Chrome Valve Cover Wing Bolts (6121519) – $18.99
3-Piece Timing Gear Set With Fully Adjustable Camshaft And Crank Sprockets (5027373) – $82.99

What’s the price range for 1958 Chevrolet Brookwood Engine Parts?

Engine Part prices for the 1958 Chevrolet Brookwood start at $1.79 and go up to $1,886.00 for the most premium parts.

What’s the average price of a Engine Part for a 1958 Chevrolet Brookwood?

The average price for Engine Parts for the 1958 Chevrolet Brookwood is $235.78. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Brookwood model years?

Yes, we currently carry Engine Parts for 6 model years of Chevrolet Brookwoods between 1959 and 1972. Engine Parts are bought most frequently for the following model years: 1972, 1971, 1970, 1969, 1961, 1960, and 1959.

What are the cheapest Engine Parts for my 1958 Chevrolet Brookwood?

The cheapest 1958 Chevrolet Brookwood Engine Parts we carry in stock are:

Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (22146590) – $1.79
Stock Replacement Oil Pump Shaft Guide (5681006) – $3.29
Machined Steel 7 Degree, 11/32", Single Groove Race Lock (50289439) – $5.99
10 Degree, 11/32", Single Groove Lock with Lash Cap Recess (50288186) – $6.99
Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (11529953) – $6.99

What are the top-rated Engine Parts that fit the 1958 Chevrolet Brookwood?

Out of 141 reviews by customers, our 1958 Chevrolet Brookwood Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1958 Chevrolet Brookwood and their top-rated products:

Engine Gaskets and Seals
- Valve Cover Gasket Set for Chevrolet (22342677) – $37.99
Valve Cover and Cylinder Heads
- Valve Cover Gasket Set for Chevrolet (22342677) – $37.99

What types of Engine Parts do you sell for my 1958 Chevrolet Brookwood?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1958 Chevrolet Brookwood:

Can I get help with 1958 Chevrolet Brookwood Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Brookwood Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Brookwood Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1958 Chevrolet Brookwood Engine Parts

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

Sealed Power – Engine Rocker Arm Kit (Part No.R-826)

Edelbrock – Hold-Down Tab Kits for Big-Block Chevy 5" long (Qty 7) (Part No.4414)

National – Engine Harmonic Balancer Kit (Part No.5000)

ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Melling – Stock Replacement OE Type Oil Pump (Part No.M-62)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Mr. Gasket – Oil Dipstick And Tube (Part No.6235)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Holley – M/T Valve Covers – Vintage Style – Finned – SBC – Satin Black (Part No.241-83)

Melling – Stock Replacement Oil Pump Screen (Part No.62-S3)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10111-01)

Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (Part No.555-007)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 30055 R)

Melling – Stock Replacement Oil Pump Shaft Guide (Part No.M-55005)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-55)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Competition Cams – Magnum 230/230 Hydraulic Roller Cam (Part No.12-450-8)

Competition Cams – Timing Cover, Small Block Chevy 3 Piece Billet 1 Ea (Part No.310)

National – Shaft Repair Sleeve (Part No.99187)

INA US – ENGINE TIMING SET (Part No.ZC-78300)

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Edelbrock – GASKETS (Part No.7548)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Competition Cams – 3-Piece Timing Gear Set With Fully Adjustable Camshaft And Crank Sprockets (Part No.160001)

National – Engine Harmonic Balancer Kit (Part No.5000)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

ARP Auto Racing – For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly (Part No.200-1501)

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)

Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)

Competition Cams – Lifters, Sbc/Bbc Pro Magnum Hyd 1 St (Part No.858-16)

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

Competition Cams – Sportsman Solid Roller Lifter Set with Bushing for Chevrolet Small Block (Part No.96892B-16)

Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Flat Tappet Camshaft (Part No.5085)

Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)

Edelbrock – RPM 348/ 409 Chevy Cylinder Head Hydraulic Roller Camshaft (Part No.60819)

Edelbrock – Small-Block Chevy E-Street Cylinder Head 70cc Pair (Part No.5073)

Competition Cams – Sportsman Solid Roller Lifter Set with Bearing for Chevrolet Small Block (Part No.96892-16)

Edelbrock – Small-Block Chevy E-Street Cylinder Heads 64cc (Part No.5089)

Competition Cams – Sportsman Solid Roller Lifter Set with Bearing for Chevrolet Small Block (Part No.96894-16)

Competition Cams – 16 Springs (Part No.26028-16)

Competition Cams – 16 Springs (Part No.947-16)

Competition Cams – 16 Springs (Part No.26095-16)

Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 265-350 V8 (Part No.2208)

Edelbrock – CAMSHAFTS (Part No.2210)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2142)

Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2267)