1958 Chevrolet Brookwood Camshafts
More 1958 Chevrolet Brookwood Camshafts
Find your specific 1958 Chevrolet Brookwood original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1958 Chevrolet Brookwood Camshafts
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam for Chevrolet Big Block 396-454 (Part No.11-600-4)
from
$542.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Sealed Power – Performance Camshaft (Part No.CS-1014R)
from
$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Edelbrock – Rollin’ Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V) (Part No.2261)
from
$528.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)
from
$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Sealed Power – Engine Camshaft (Part No.CS-774)
from
$72.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Meets or exceeds OEM specs
- Original equipment performance
- Idle: Stock
- Latest high quality materials
- Precision machining
- Made in USA
Sealed Power – Performance Camshaft (Part No.CS-1106R)
from
$179.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam for Chevrolet Small Block (Part No.12-433-8)
from
$522.99
HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
- 288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – CAMSHAFT, BBC 282 XTREME ENERGY HYD ROLLER 1 EA (Part No.11-432-8)
from
$547.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)
from
$1566.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde
Product Features:
See More
Product Features:
- Iron Camshaft Material
- 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
- Roller Lifter Type
- Valve Springs Required
- Assembly Lubricant Included
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)
from
$334.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8 (Part No.2162)
from
$313.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)
from
$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Big Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)
from
$287.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.CL12-205-2)
from
$1257.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit for Chevrolet Small Block (Part No.K12-205-2)
from
$1482.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454 (Part No.K11-444-8)
from
$1471.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)
from
$366.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Popular 1958 Chevrolet Brookwood Camshafts Categories
1958 Chevrolet Brookwood Camshafts
Maybe you’re in the middle of a full rebuild of that 1958 Chevrolet Brookwood. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 5 different Camshafts in our inventory ranging from $46.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1958 Chevrolet Brookwood running smoothly.
Camshafts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Chevrolet Brookwood. Edelbrock and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1958 Chevrolet Brookwood, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 1958 Chevrolet Brookwood rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1958 Chevrolet Brookwood Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Chevrolet Brookwood demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Brookwood the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular Edelbrock Camshafts
We carry Edelbrock parts in our stock across Camshaft and Lifter Kits categories, plus more. For a 1958 Chevrolet Brookwood, our most popular Edelbrock Camshafts include:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
FAQs for 1958 Chevrolet Brookwood Camshafts
What are the most purchased Camshafts for the 1958 Chevrolet Brookwood?
Out of 5 Camshafts for the 1958 Chevrolet Brookwood, the most popular in our inventory are:
from
$366.99
This product is not rated
Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8
Camshaft and Lifter Kits
from
$1566.99
This product is not rated
Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8
Camshaft and Lifter Kits
from
$441.99
This product is not rated
Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8
Camshafts
