1958 Cadillac DeVille Performance and Racing Products
Find Your Specific 1958 Cadillac DeVille Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1958 DeVille. Advance Auto Parts has popular DeVille parts like Performance Ignition Products, Performance Distributors, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other DeVille model years including
1996,
1997,
1998,
1999,
2001,
2002,
2003,
2004,
2005 and more. Select a category of 1958 Cadillac DeVille Performance and Racing Products below and start saving instantly.
Popular 1958 Cadillac DeVille Performance and Racing Products Categories
Essential Performance and Racing Products for 1958 Cadillac DeVilles
Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)
from
$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)
from
$84.29
“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XX (Part No.550-511-3XX)
from
$1449.99
The No:1 EFI conversion system just got better. Introducing Sniper 2 EFI – a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3AE (Part No.550-511-3AE)
from
$1349.99
Want to make the switch from the original Sniper EFI to Sniper 2 and don’t want to rewire your system The new Sniper 2 upgrade kits are designed to do exactly that! Included with each Sniper 2 Plug and Play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Polished, 550-510-BXX (Part No.550-510-BXX)
from
$1349.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Holley – Holley 4150 ALUM DP 650 ELECT CHOKE, 0-4777SAE (Part No.0-4777SAE)
from
$699.99
Holley upgraded their two most popular sizes of double pumper with electric chokes. The 650 and 750 CFM models are available in the classic zinc and shiny polished finishes.
See More
Holley – Holley 4150 ALUM DP 750 CFM ELECTRIC CHOKE, 0-4779SAE (Part No.0-4779SAE)
Holley – Holley Prem Street Carbs (Avengers), 0-80770 (Part No.0-80770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow, vacuum secondaries, and single fuel inlet makes it amazingly universal. Add to that an electric choke and this carb is super easy to use on almost anything. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Holley – Holley Street Carburetor: 770 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-86770BK (Part No.0-86770BK)
from
$921.99
The Ultra Street Avenger carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Street Avenger carburetors have the same great features as their aluminum counterparts such as a tumble polished aluminum finish; quick change vacuum secondaries for easy tuning to optimize performance or fuel economy; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included fuel line kit so there are no unnecessary trips back to the parts store. Ultra Street Avengers feature the same optimized street calibration as the zinc versions so you know they will run great on your vehicle. In addition, the Ultra Street Avenger now comes with anodized metering blocks and a base plate made from 6061-T6 billet aluminum and a built in, clear fuel level sight glass for easy, no mess fuel level adjustments. Don’t trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
MSD Ignition – MSD Ignition Distributor Cap And Rotor, Gm Hei Distributor, Red, 8416 (Part No.8416)
from
$51.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits.
See More
Accel – Accel Distributor Cap And Rotor Kit, 8120 (Part No.8120)
Accel – Accel Distributor Cap & Rotor Kit – HEI Style – Tan – 1972-1986 Various GM – Clamp Down Cap, 8122 (Part No.8122)
from
$49.99
“ACCEL cap and rotor kits offer superior protection from “”arc-thru”” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.”
See More
Lakewood – Lakewood Trans Mount: Urethane-Chevy, 24350 (Part No.24350)
from
$103.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.
See More
Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2470R (Part No.2470R)
from
$58.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
See More
Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2471S (Part No.2471S)
from
$55.29
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
See More
Mr. Gasket – Mr. Gasket Alternator Bracket – F-Style – Chrome, 9850 (Part No.9850)
from
$27.69
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with No:9852.
See More
Upgrade your 1958 Cadillac DeVille with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1958 Cadillac DeVille, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your DeVille functioning at its best. At Advance Auto Parts, we offer a wide selection of 71 Performance and Racing Products for the 1958 Cadillac DeVille, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1958 Cadillac DeVille at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $27.69 to $2,249.99, with
an average price of $977.52.
Our 71 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1958 Cadillac DeVille without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 Cadillac DeVille, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, Holley, Accel, and more.
Edelbrock Performance and Racing Products
start at just $450.99 and boast an impressive 4.4 stars average rating from customers.
Holley and Accel also bring quality to the table, with Performance and Racing Products available starting at $49.99, and at an average 4.2 stars rating.
With 260 customer reviews and counting, our 1958 Cadillac DeVille Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1958 Cadillac DeVille is always ready to roll. We’re committed to providing you with everything you need to keep your DeVille in top shape, all in one place.
Start shopping confidently below for your 1958 Cadillac DeVille!
Best-Selling Performance Ignition Products for 1958 Cadillac DeVilles
Enhance the driving experience in your Cadillac with 9 quality Performance Ignition Product components, starting at $49.99.
Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)
from
$49.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Red Wire with Red Straight Boots – 5040R 8mm super stock universal fit spark plug wires feature a spi… (Part No.5040R)
from
$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)
from
$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More
Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)
from
$84.29
“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”
See More
Accel – Accel Spark Plug Wire Set – 8.8mm-300+ Ferro-Spiral Race – Universal- Vari-Angle Boots – 7040 300+ race wire universal spark plug wire sets have a … (Part No.7040)
from
$187.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Most Popular 1958 Cadillac DeVille Performance Distributors
Customize your Cadillac with 1 Performance Distributors products
like Performance Distributor Cap and Rotor Kits, all
priced under $56.29.
Accel – Accel Distributor Cap And Rotor Kit, 8120 (Part No.8120)
Top Picks for 1958 Cadillac DeVille Performance Exhaust Products
Upgrade Cadillac DeVilles with top-quality Performance Exhaust Products parts, including 1 OEM and aftermarket selections for your 1958 model.
Mr. Gasket – Mr. Gasket Alternator Bracket – F-Style – Chrome, 9850 (Part No.9850)
from
$27.69
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with No:9852.
See More
In-Demand Performance Transmissions for 1958 Cadillac DeVilles
Select from 1 premium Performance Transmissions parts for your 1958 Cadillac DeVille.
Lakewood – Lakewood Trans Mount: Urethane-Chevy, 24350 (Part No.24350)
from
$103.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.
See More
Most Sold 1958 Cadillac DeVille Performance Fuel Systems
Explore our best-selling Cadillac parts for the 1958 DeVille among 56 OEM and aftermarket options starting from $407.99.
Edelbrock – Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
“The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)
from
$469.99
“The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″” Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.”
See More
Edelbrock – Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)
from
$450.99
“The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow, vacuum secondaries, and single fuel inlet makes it amazingly universal. Add to that an electric choke and this carb is super easy to use on almost anything. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Edelbrock – Edelbrock Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$414.99
“The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$474.99
“The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-80770 (Part No.0-80770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street/Strip Carbs, 0-9776 (Part No.0-9776)
from
$659.99
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 adjustable float carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they’re available in your choice of universal or direct fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
See More
Holley – Holley Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80670 (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carbs, 0-80508S (Part No.0-80508S)
from
$539.99
One of the most widely used Holley carbs of all times -the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Edelbrock – Edelbrock Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR), 9905 (Part No.9905)
from
$437.99
“The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Street Carbs, 0-1850S (Part No.0-1850S)
from
$491.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Edelbrock – Edelbrock Performer 1413 Carburetor: 800 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1413)
from
$590.99
“The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1413 Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-81670 (Part No.0-81670)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80458SA (Part No.0-80458SA)
from
$528.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-5XR (Part No.550-511-5XR)
from
$2249.99
The 1 EFI conversion system just got better! Introducing Sniper 2 EFI – a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more.
See More
Sniper Motorsports – Sniper Motorsports Sniper Efi Super Sniper Stealth 1250 – Black, 550-877 (Part No.550-877)
from
$2249.99
If you’re looking to make some big power, the Super Sniper Stealth is made for you! Holley’s Sniper EFI Super Sniper Stealth 1250 is the best way to convert your carbureted engine to fuel injection with just 4 simple connections required. Super Sniper can support up to 1250HP boosted with 8 100 LB/HR Injectors. With a Stealth 1250 system, you get that carburetor styling but the functionality of a Sniper! This 4-barrel system features a single pattern bolt on design built to fit 4150 flange manifolds. The Super Sniper Stealth ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Additionally, this Sniper kit also includes transmission kick down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications!.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XR (Part No.550-510-5XR)
from
$2249.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XR (Part No.550-511-3XR)
from
$2099.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-3XR (Part No.550-510-3XR)
from
$2099.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XK (Part No.550-510-5XK)
from
$2049.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-BXR (Part No.550-511-BXR)
from
$1999.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-BXR (Part No.550-510-BXR)
from
$1999.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Holley – Holley Professional Race Carburetor: 1250 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray, 0-80908HB (Part No.0-80908HB)
from
$1999.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Top-Rated Performance and Racing Products Brands For Your 1958 Cadillac DeVille
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1958 Cadillac DeVilles. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, Holley, and Accel, and more. Performance and Racing Products from these brands that fit a 1958 DeVille start at just $49.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1958 Cadillac DeVille Performance and Racing Products
When it comes to maintaining or upgrading your 1958 Cadillac DeVille, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1958 Cadillac DeVille. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $450.99, with an average price of just $480.32. Plus, with over 68 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$519.99
(3)
Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
from
$450.99
(55)
Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“I love the product, great performance and a awesome chrome look!”
from
$469.99
(10)
Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“Dropped on an 84 Chevy k20. Runs like a top.”
Popular Holley 1958 Cadillac DeVille Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1958 Cadillac DeVille owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1958 DeVille, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Holley Performance and Racing Products range from $499.99 to $699.99, plus, with more than 49 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$659.99
(2)
Holley Street/Strip Carbs, 0-9776
“REPLACED EXHISTING HOLLEY CARB,LIKE THE PRODUCT LOOKS GOOD ON ENGINE, POLISHED ,EXCELLENT CARBS USED ON OTHER PROJECTS”
from
$699.99
(2)
Holley Prem Street Carbs (Avengers), 0-80770
“This was the carb that my engine builder suggested.”
from
$499.99
(45)
Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S
“Very satisfied”
FAQs for 1958 Cadillac DeVille Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1958 Cadillac DeVilles?
Out of 71 Performance and Racing Products that fit 1958 Cadillac DeVilles, the following parts are the top sellers:
- Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (5020646) – $450.99
- Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (6340008) – $499.99
- Edelbrock Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $414.99
What’s the price range for 1958 Cadillac DeVille Performance and Racing Products?
Performance and Racing Product prices for the 1958 Cadillac DeVille start at $27.69 and go up to $2,249.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1958 Cadillac DeVille?
The average price for Performance and Racing Products for the 1958 Cadillac DeVille is $977.52. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac DeVille model years?
What are the cheapest Performance and Racing Products for my 1958 Cadillac DeVille?
The cheapest 1958 Cadillac DeVille Performance and Racing Products we carry in stock are:
- Mr. Gasket Alternator Bracket – F-Style – Chrome, 9850 (6124151) – $27.69
- Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (5024269) – $49.99
- Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (5024277) – $55.19
- Accel Distributor Cap And Rotor Kit, 8120 (5024315) – $56.29
- Mr. Gasket Thermocap Radiator Cap, 2470R (10648711) – $58.99
What are the top-rated Performance and Racing Products that fit the 1958 Cadillac DeVille?
Out of 260 reviews by customers, our 1958 Cadillac DeVille Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1958 Cadillac DeVille and their top-rated products:
- Performance Fuel Systems
- Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (17140004) – $519.99
- Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (6340008) – $499.99
- Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (11920262) – $469.99
What types of Performance and Racing Products do you sell for my 1958 Cadillac DeVille?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1958 Cadillac DeVille:
Can I get help with 1958 Cadillac DeVille Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac DeVille Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac DeVille Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
