1957 Oldsmobile Super 88 Ignition and Tune-Up Products

Essential 1957 Oldsmobile Super 88 Ignition and Tune-Up Products

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1018)

Distributor Vacuum Advance

from

$33.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

8Mm Super Stock Spiral Uni Bu

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

8Mm Super Stock Spiral Uni Bk

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Carquest – Ignition Condenser, Capacitance Rating: 0.18-0.23 (Part No.G102A)

Ignition Condenser, Capacitance Rating: 0.18-0.23

from

$16.99
Product Features:
  • Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
See More

Carquest Premium – Ignition Contact Set (Part No.APA1021)

Ignition Contact Set

from

$28.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red

from

$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

8Mm Super Stock Spiral Uni Rd

from

$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

PerTronix – D1100 Flame-Thrower Distributor HEI Oldsmobile V8 Black Cap (Part No.D1100)

D1100 Flame-Thrower Distributor HEI Oldsmobile V8 Black Cap

from

$328.99
STREET / STRIP HEI distributorsOur HEI distributors are built from the ground up with all new components. We have engineered a special high energy module and coil combination that operates without misfires beyond 7500 RPM. That’s nearly 3000 RPM higher t

Product Features:
  • PerTronix D1100 Flame-Thrower Distributor HEI Oldsmobile V8 Black Cap
  • New lightweight aluminum alloy housing.
See More

PerTronix – D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap (Part No.D7110700)

D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap

from

$414.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor

Product Features:
  • PerTronix D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap
  • Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1800)

Ignition Conversion Kit

from

$391.99
Ignition Conversion Kit

PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)

High-Performance Electronic Ignition for Delco 8-Cylinder Engines

from

$117.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1181 Ignitor Delco 8 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1756)

Ignition Conversion Kit

from

$234.99
Ignition Conversion Kit

ACDelco – Ignition Capacitor (Part No.D203)

Ignition Capacitor

from

$21.79
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.85)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to innovate with its Copper Spark Plug. Designed and engineered in the USA, this spark plug features a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full voltage at the spark gap and a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making it a reliable choice for consistent performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug is engineered to deliver quick starts and smooth acceleration, enhancing your vehicle’s performance.
  • Good Fuel Economy: Designed to optimize fuel efficiency, this spark plug helps you get the most out of every gallon.
See More

ACDelco – Copper Core Spark Plug (Part No.R43S)

Copper Core Spark Plug

from

$4.99
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, XR5 (Part No.3332)

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, XR5

from

$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
  • V-Groove Tip Design: The unique V-Groove tip design of the XR5 model enhances ignitability and overall engine performance.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil (Part No.E5)

Ignition Coil

from

$23.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured using high-quality materials to provide superior durability and long service life
  • Designed and engineered to ensure precise performance
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Universal Fit 300+ Race Spark Plug Wire Set

from

$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:
  • 150 Ohms/ft Of Resistance
  • 600 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Spiral-Wound Copper/Nickel Alloy
See More

NGK – NGK Wire Set (Part No.51422)

NGK Wire Set

from

$34.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-8113)

Spark Plug Wire Set

from

$36.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest – Distributor Cap (Part No.C158)

Distributor Cap

from

$18.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
  • Distributor cap has aluminum terminals to match OE performance.
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)

D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red

from

$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black

from

$41.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D4050 Flame-Thrower HEI Distributor Cap Black (Part No.D4050)

D4050 Flame-Thrower HEI Distributor Cap Black

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4050 Flame-Thrower HEI Distributor Cap Black
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

1957 Oldsmobile Super 88 Ignition and Tune-Up Products

You count on your 1957 Oldsmobile Super 88 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 58 Ignition and Tune-Up Products ranging in price from $3.29 to $538.99, you’re sure to find everything you need for your 1957 Oldsmobile Super 88.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like ACDelco, Autolite, and E3. 1957 Oldsmobile Super 88 Ignition and Tune-Up Products start as low as $3.29!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 314 extensive product reviews on 1957 Oldsmobile Super 88 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Coil with 4.5 stars and Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration with 4.9 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1957 Oldsmobile Super 88 below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1957 Oldsmobile Super 88

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Oldsmobile Super 88 running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, E3, and even more.

Popular Dorman – Help Ignition and Tune-Up Products

You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1957 Oldsmobile Super 88 back on the road. Some of the top-rated Dorman – Help products in these categories are:
Spark Plug Non-Foulers - 14mm Gasket Seat
from $5.49
(1)
Spark Plug Non-Foulers – 14mm Gasket Seat
Spark Plugs

Top-Rated Accel Ignition and Tune-Up Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1957 Oldsmobile Super 88, and some of our most reviewed Accel parts include:
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
from $63.99
(25)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
7Mm Super Stock Copper Uni
from $53.09
(12)
7Mm Super Stock Copper Uni
Optional Spark Plug Wires
8Mm Super Stock Spiral Uni Rd
from $101.99
(11)
8Mm Super Stock Spiral Uni Rd
Optional Spark Plug Wires

FAQs for 1957 Oldsmobile Super 88 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1957 Oldsmobile Super 88?

Out of 58 Ignition and Tune-Up Products for the 1957 Oldsmobile Super 88, the most popular in our inventory are:
Copper Core Spark Plug
from $4.99
(13)
Copper Core Spark Plug
Spark Plugs

What are the top-rated 1957 Oldsmobile Super 88 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1957 Oldsmobile Super 88 based on customer reviews/ratings are:
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
from $4.29
(10)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, XR5
from $4.99
(9)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, XR5
“Yes they make the zap.zap when piston comes up to.compress fuel.and air”