1957 Oldsmobile 98 Engine Cooling Parts
More 1957 Oldsmobile 98 Engine Cooling Parts
Find your specific 1957 Oldsmobile 98 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1957 Oldsmobile 98 Engine Cooling Parts
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Standard Thermostat:180 Degrees (Part No.13848)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad UltraStats – Thermostat: 180 Degrees (Part No.5203-180)
from
$12.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Motorad UltraStats – Thermostat: 192 Degrees (Part No.5239-192)
from
$35.99
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
ACDelco – Professional Engine Coolant Thermostat (Part No.G4000310403ACD)
from
$23.86
An ACDelco Professional, premium aftermarket Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is the ideal high quality replacement for your GM vehicle. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This premium aftermarket replacement engine coolant thermostat is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
- Professional, premium aftermarket replacement engine coolant thermostat
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13849)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad UltraStats – Thermostat: 195 Degrees (Part No.5203-195)
from
$12.99
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1017)
from
$27.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
ACDelco – Engine Coolant Temperature Sensor (Part No.15-51107)
from
$35.99
ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
ACDelco – Engine Coolant Temperature Sensor (Part No.213-77)
from
$37.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine running at proper temperature
- Alerts vehicle operator of high engine temperature conditions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1028)
from
$30.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Engine Coolant Temperature Sensor (Part No.TS10075)
from
$29.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.
Product Features:
See More
Product Features:
- Delphi temperature sensors deliver accurate readings and optimal performance
- Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
- Each sensor is electrically insulated to eliminate interference from other components in the vehicle
- Delphi temperature sensors are impervious to electrical noise and interference
Carquest – Engine Coolant Temperature Switch (Part No.WT356)
from
$19.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
- The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
- In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
ACDelco – Engine Coolant Temperature Sensor (Part No.213-815)
from
$45.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine running at proper temperature
- Alerts vehicle operator of high engine temperature conditions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Engine Coolant Temperature Switch (Part No.WTA1105)
from
$19.49
The engine coolant temperature sender, not to be confused with the engine coolant temperature sensor, is located anywhere within the engine cooling system, and contains a thermistor that changes in resistance value as the thermistors ambient temperature changes. The engine coolant temperature sender is fed 12 volts and is typically used in conjunction with a gauge in the instrument cluster to provide a visual representation of the engine coolant temperature condition.
Product Features:
See More
Product Features:
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Thermally conductive grease within the housing providing the most accurate temperature transfer from the engine to the thermistor.
- Plated brass or aluminum housings to prevent housing corrosion, ensures effective heat distribution to thermal element, and ensure a secure and leak-free thread mount.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-624)
from
$72.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
- Complete package – assembly is designed with the same materials and components as the original part.
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Popular 1957 Oldsmobile 98 Engine Cooling Parts Categories
1957 Oldsmobile 98 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 1957 Oldsmobile 98. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 14 different Engine Cooling Parts in our inventory ranging from $9.99 to $99.99. That means you can find the exact parts or products you need to keep that 1957 Oldsmobile 98 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1957 Oldsmobile 98. Carquest Premium, Motorad UltraStats, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 1957 Oldsmobile 98, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 262 reviews in this category, some of the top rated parts include Electric Fan – 14" Diameter with 3.5 stars and Thermostatic Fan Control – Preset with 3.0 stars.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1957 Oldsmobile 98 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 1957 Oldsmobile 98 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1957 Oldsmobile 98 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 98 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Carquest Premium Engine Cooling Parts
We carry Carquest Premium parts in our stock across Thermostats categories, plus more. For a 1957 Oldsmobile 98, our most popular Carquest Premium Engine Cooling Parts include:
FAQs for 1957 Oldsmobile 98 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 1957 Oldsmobile 98?
Out of 14 Engine Cooling Parts for the 1957 Oldsmobile 98, the most popular in our inventory are:
What are the top-rated 1957 Oldsmobile 98 Engine Cooling Parts?
Top-rated Engine Cooling Parts for your 1957 Oldsmobile 98 based on customer reviews/ratings are:
from
$38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
from
$62.99
(2)
Thermostatic Fan Control – Adjustable
“Need to find brass bushings to fit sensor to intake.Very easy to install!”
