1957 Jeep FC170 Ignition and Tune-Up Products
More 1957 Jeep FC170 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1957 Jeep FC170, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1957 Jeep FC170 Ignition and Tune-Up Products
Carquest Premium – Ignition Conversion Kit (Part No.CBA1767)
from
$711.99
Ignition Conversion Kit
Carquest Premium – Ignition Conversion Kit (Part No.CBA1166)
from
$238.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
PerTronix – 1548N6 Ignitor Prestolite 4 cyl 6 Volt Negative Ground (Part No.1548N6)
from
$169.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign
Product Features:
See More
Product Features:
- PerTronix 1548N6 Ignitor Prestolite 4 cyl 6 Volt Negative Ground
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
NGK – NGK Wire Set (Part No.51004)
from
$23.79
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)
from
$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
Product Features:
See More
Product Features:
- 150 Ohms/ft Of Resistance
- 600 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- Spiral-Wound Copper/Nickel Alloy
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6309)
from
$34.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Driveworks – Ignition Coil (Part No.26189)
from
$35.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
ACDelco – Ignition Coil (Part No.U505)
from
$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
ACDelco – Ignition Capacitor (Part No.D203)
from
$21.79
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Ignition Contact Set (Part No.AMA1057)
from
$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Condenser (Part No.GAA1039)
from
$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Contact Set (Points) (Part No.A81)
from
$13.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- All locks and accessories feature high grade materials for installation confidence
- Professional quality construction ensures superior operation
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
- A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Omix – Ignition Module (Part No.17252.06)
from
$204.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- For Use With 17239.08
- Replacement Part
- For Solid State Distributor
- Limited 5 Year Warranty
ACDelco – Copper Core Spark Plug (Part No.R43S)
from
$4.99
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Champion – Copper Plus Small Engine Spark Plug: Dependable Performance, OE Replacement, J8C (Part No.841)
from
$3.79
Dependable Performance, OE Replacement, J8C. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. Built to ISO and SAE standards, it offers dependable performance and durability. The OE type replacement plug resists fouling and boasts superior corrosion resistance. Its copper core center electrode allows for accurate control of heat range, ensuring a longer life, while the nickel center electrode tip material and flat seat type further enhance its reliability.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- OE type replacement plug
- Resists fouling
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Increased Conductivity and Heat Control: The Champion Copper Plus Small Engine Spark Plug features a copper core electrode that enhances conductivity and heat management, ensuring good overall wear.
- Enhanced Reliability: With a nickel center electrode tip material and flat seat type, this spark plug provides enhanced reliability and consistent performance for small engines.
NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, BR6S (Part No.3522)
from
$2.99
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, XR4IX (Part No.7189)
from
$10.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
Product Features:
See More
Product Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Omix – Spark Plug Rain Shield Set (Part No.17248.10)
from
$34.99
Spark plug rain shields prevent water build up on the cylinder head where the spark plug screws in. Over time, these rain shields can dry out, crack, or go missing. Replace your old ones with this set of 4 spark plug rain shields from Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6002)
from
$32.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4004)
from
$24.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Popular 1957 Jeep FC170 Ignition and Tune-Up Products Categories
1957 Jeep FC170 Ignition and Tune-Up Products
You count on your 1957 Jeep FC170 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 20 Ignition and Tune-Up Products ranging in price from $1.99 to $536.99, you’re sure to find everything you need for your 1957 Jeep FC170.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 7 different brands like E3, ACDelco, and Champion. 1957 Jeep FC170 Ignition and Tune-Up Products start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 86 extensive product reviews on 1957 Jeep FC170 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 5.0 stars and Small Engine Display Pack with 3.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1957 Jeep FC170 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1957 Jeep FC170
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Jeep FC170 running right for years to come. In our inventory you’ll find brands like E3, ACDelco, Champion, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1957 Jeep FC170 back on the road. Some of the top-rated ACDelco products in these categories are:
from
$4.99
(15)
Conventional Nickel Tip Copper Core Spark Plug: Maximizes Durability & Heat Transfer
Spark Plugs
FAQs for 1957 Jeep FC170 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1957 Jeep FC170?
Out of 20 Ignition and Tune-Up Products for the 1957 Jeep FC170, the most popular in our inventory are:
from
$3.79
(13)
Copper Plus Small Engine Spark Plug: Dependable Performance, OE Replacement, J8C
Spark Plugs
What are the top-rated 1957 Jeep FC170 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1957 Jeep FC170 based on customer reviews/ratings are:
from
$1.99
(3)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“AutoLite spark plug was fine, as I expected. Service received from Advance Auto was terrible.”
from
$1.99
(3)
Small Engine Display Pack
“Put a new plug, air filter, oil change each spring and your mower will last years. Not to mention it will run better.”
from
$34.99
(3)
Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit
“The set came with no coil wire only the six plug wires.”
