1957 GMC 350-8 Engine Parts
More 1957 GMC 350-8 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1957 GMC 350-8, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1957 GMC 350-8 Engine Parts
Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)
from
$990.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 70cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Felpro – Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set (Part No.OS 6412 C)
from
$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)
from
$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.
Product Features:
See More
Product Features:
- 7/16″-14 Thread Size(s)
- .700″ Thread Length
- 8740 Chromoly
- 1.75″ Effective Stud Length
- Set of 16
- .800″ Adjuster Thread Depth
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
- Black Oxide
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)
from
$366.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Mr. Gasket – Mls Head Gasket (Part No.3128G)
from
$114.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Gasket bore – 4.035 inch: Compressed thickness – .040 inch
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Felpro – Engine Valve Cover Gasket Set (Part No.VS 4569)
from
$12.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$147.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
Edelbrock – SuprChrg (Part No.1551)
from
$3552.99
SuprChrg
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Imperial – Engine Oil Cooler (Part No.241046)
from
$259.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- Chevrolet V8 applications
- Size: 1.5 in. x 6.5 in. x 18 in.
- Heavy duty applications
- Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
- Two-pass design for increased cooling
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
Felpro – Engine Timing Cover Gasket Set (Part No.TCS 11557)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)
from
$169.99
Product Features:
See More
- Keyway Adjustable
- Double Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- 9-Keyway Setting Points
- For Chevys Opperating in 6500-8500 RPM Range
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
Sealed Power – Engine Piston Ring Set (Part No.E-252X)
from
$76.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)
from
$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers (Part No.230-7003)
from
$7.29
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
- Hi-Volume
- 3.125″
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-54A)
from
$14.29
A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ARP Auto Racing – For Use With Chevy Small Block, 5/8" Socket Size, 3/4" – 16 Thread Size (Part No.134-2501)
from
$36.49
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 PSI bolts that let you exert maximum clamping force. Special features include 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.
Product Features:
See More
Product Features:
- Ultra Strong Bolt Rated At 200,000 PSI
- 1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
- Delivers ARP Quality And Reliability
- Made In USA
- 12-Point Head
- Sold Individually
- 200,000 PSI
- 2.470″ Underhead Length
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Felpro – Fuel Pump Bowl Gasket (Part No.5019)
from
$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (sold by each) (Part No.555-007)
from
$1.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Valve Lifter (Part No.HT-951)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)
from
$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
Felpro – Engine Gasket Set (Part No.FS 7613 SH-2)
from
$121.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
Popular 1957 GMC 350-8 Engine Parts Categories
1957 GMC 350-8 Engine Parts
You count on your 1957 GMC 350-8 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 56 Engine Parts ranging in price from $0.43 to $3,552.99, you’re sure to find everything you need for your 1957 GMC 350-8.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 9 different brands like Felpro, Sealed Power, and Mr. Gasket. 1957 GMC 350-8 Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 32 extensive product reviews on 1957 GMC 350-8 Engine Parts. Some of the top-rated Engine Parts products we carry are Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Rear Main Seal Set with 1.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1957 GMC 350-8 below to get started!
Top-Rated Engine Parts Brands For Your 1957 GMC 350-8
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 GMC 350-8 running right for years to come. In our inventory you’ll find brands like Felpro, Sealed Power, Mr. Gasket, and even more.
Popular Dorman Engine Parts
You’ll find popular Dorman brand products across Engine Timing Parts. All are waiting to get your 1957 GMC 350-8 back on the road. Some of the top-rated Dorman products in these categories are:
from
$3.99
(2)
Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each)
Timing Cover Plugs
Top-Rated Mr. Gasket Engine Parts
If Mr. Gasket are what you’re looking for, our inventory holds plenty. We stock Mr. Gasket brand Engine Parts for your 1957 GMC 350-8, and some of our most reviewed Mr. Gasket parts include:
FAQs for 1957 GMC 350-8 Engine Parts
What are the most purchased Engine Parts for the 1957 GMC 350-8?
Out of 56 Engine Parts for the 1957 GMC 350-8, the most popular in our inventory are:
What are the top-rated 1957 GMC 350-8 Engine Parts?
Top-rated Engine Parts for your 1957 GMC 350-8 based on customer reviews/ratings are:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
from
$9.49
(3)
Rear Main Seal Set
“Do not try to use this in a buick 401. It is way to large in diameter. It will not hammer flat enough to work. Would give no stars if possible. Felpr”
