1957 Ford Thunderbird Ignition and Tune-Up Products

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1957 Thunderbird. Advance Auto Parts has popular Thunderbird parts like Spark Plugs, Ignition Wires, Distributors and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Thunderbird model years including 1993, 1994, 1995, 1996, 1997, 2002, 2003, 2004, 2005 and more. Select a category of 1957 Ford Thunderbird Ignition and Tune-Up Products below and start saving instantly.

Popular 1957 Ford Thunderbird Ignition and Tune-Up Products Categories

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Ignition Starter Switches

Distributor Vacuum Advances

Points and Condensers and Kits

Ignition Tune-up Kits

Essential Ignition and Tune-Up Products for 1957 Ford Thunderbirds

from

$117.99

For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition.

Product Features:

PerTronix 1281 Ignitor Ford 8 cyl
Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.

from

$51.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$3.79

ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Nickel Alloy Electrode Tip: Designed with a nickel alloy center electrode tip, these spark plugs provide enhanced durability and consistent performance.
Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to the overall reliability and efficiency of your vehicle’s engine.

from

$6.42

2X longer service life compared to standard copper plugs Bosch Platinum Spark Plugs are the newest member of our OE fine wire spark plug family. From the brand trusted in the world’s most advanced engines, Bosch Platinum Spark Plugs are engineered to provide you with improved ignitability and performance.

Product Features:

OE design for optimum fit and function
Fine wire design delivers improved ignitability and performance life
Center electrode is an ultra fine wire design.
Copper core provides broader heat range to resist pre-ignition
Tapered shape ground electrode reduces flame shrouding for improved combustion
Yttrium enhanced to resist wear
Nickel-plated shell with rolled threads
Ribbed insulator design

from

$12.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$41.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Each Fuel Vapor Canister is a direct-fit OE replacement that ensures ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$74.99

Distributor Cap and Rotor Kit

from

$112.99

These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:

8.8mm Graphite Suppression
Silicone Spark Plug Boots
550 Degree Double Silicone Construction
Fiberglass Braid
Carbon/Graphite Core
Magnetic Suppression
Fiberglass/Kevlar Core
500 Ohms Resistance

from

$69.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$13.49

from

$14.99

from

$65.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$65.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$53.09

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$41.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$25.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$129.99

For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [8] 90 Degree Boots/Terminal Ends
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$63.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$17.49

Ignition Tune-Up Kit

from

$379.99

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

PerTronix D130801 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$128.99

CARDONE New Distributors are backed by CARDONE Engineered Technology, which ensures that all CARDONE New Distributors meet proper form, fit and function. CARDONE Engineered Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Product Features:

Each distributor includes the cap and rotor to make installation a snap.
Dust covers and gaskets are also included on Honda applications for your convenience.
100% computer tested for guaranteed, long-lasting performance.
Guaranteed fit and function.
Meets or exceeds O.E.M performance.

from

$101.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$39.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$78.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$24.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-503
MSD 8242 82428
Resists Shock And Vibration
Resists Corrosion

from

$87.73

Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:

Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
Radio-Frequency Interference (RFI) Suppression
Magnets hold strength for the coil to maintain proper energy output
Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
Coil Housing is engineered to withstand extremes in temperature without cracking

Upgrade your 1957 Ford Thunderbird with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1957 Ford Thunderbird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Thunderbird functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Ignition and Tune-Up Products for the 1957 Ford Thunderbird, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Wires upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1957 Ford Thunderbird at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $1.29 to $702.99, with an average price of $61.19. Our 57 Ignition and Tune-Up Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1957 Ford Thunderbird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Ford Thunderbird, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, Autolite, Carquest, and more. NGK Ignition and Tune-Up Products start at just $4.99 and boast an impressive 5 stars average rating from customers. Autolite and Carquest also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.49, and at an average 5 stars rating. With 264 customer reviews and counting, our 1957 Ford Thunderbird Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1957 Ford Thunderbird is always ready to roll. We’re committed to providing you with everything you need to keep your Thunderbird in top shape, all in one place. Start shopping confidently below for your 1957 Ford Thunderbird!

Best-Selling Spark Plugs for 1957 Ford Thunderbirds

Enhance the driving experience in your Ford with 13 quality Spark Plug components, starting at $1.29.

show more show less

from

$4.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$3.49

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autoline Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:

Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
Multi-rib insulator reduces danger of “flash-over”
One-piece terminal post adds strength
Resistor reduces radio frequency interference (RFI) and electrode erosion
Quick Starts: Autolite Copper Core spark plugs are engineered to ensure your engine starts quickly and efficiently.
Good Fuel Economy: Designed to optimize fuel consumption, these spark plugs help you achieve better mileage.
Smooth Acceleration: Experience smoother and more responsive acceleration with Autolite Copper Core spark plugs.
OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring reliable performance.
Tapered Seat Type: Featuring a tapered seat type, these spark plugs provide a secure fit and optimal performance.

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

from

$63.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$4.49

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes optimize engine performance for a longer life and improved fuel economy. The platinum ball welding process ensures a consistent point of contact for enhanced adhesion, while the tapered seat type further contributes to the plug’s superior durability.

Product Features:

High nickel alloy side electrode maintains precise gap
Full platinum tip assures virtually no gap erosion for long life
Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
Improved Fuel Economy: Designed to enhance fuel efficiency compared to standard spark plugs.
Tapered Seat Type: Enhances performance and durability for a longer-lasting spark plug.

from

$65.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$72.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$4.79

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$3.49

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$2.99

Motorcraft spark plugs are designed, engineered and recommended by Ford Motor Company.

Product Features:

Same part installed when the engine rolled off the assembly line
30,000-mile service interval
Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
Resistor reduces radio frequency interference (RFI) and electrode erosion
Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal

from

$4.79

The Motorcraft Spark Plug is a high-quality replacement spark plug designed to provide reliable performance and long-lasting durability for your vehicle. It features a nickel alloy electrode that provides superior wear resistance and a platinum tip that ensures consistent performance over the life of the plug. The Motorcraft Spark Plug also has a ribbed insulator design that helps prevent misfires and a copper core that provides efficient heat transfer. It is designed to meet or exceed OEM specifications and is compatible with a wide range of vehicles. Whether you’re looking to replace worn-out spark plugs or upgrade to a higher-quality option, the Motorcraft Spark Plug is an excellent choice that will help keep your engine running smoothly and efficiently.

from

$1.29

Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Copper Plus – Dependable Performance.
Copper core center electrode allows for accurate control of heat range for longer life
Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
Built to ISO and SAE standards for proven performance

Most Popular 1957 Ford Thunderbird Ignition Wires

Customize your Ford with 5 Ignition Wires products like Standard Spark Plug Wires and Optional Spark Plug Wires, all priced under $153.99.

show more show less

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$53.09

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$91.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$82.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

Top Picks for 1957 Ford Thunderbird Distributors

Upgrade Ford Thunderbirds with top-quality Distributors parts, including 10 OEM and aftermarket selections for your 1957 model.

show more show less

from

$9.99

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$16.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
Distributor cap has aluminum terminals to match OE performance.
The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$4.29

from

$13.99

from

$48.49

All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:

Supplied w/Heavy Duty Rotor
Low Resistance Terminals
Full Power Output At High RPM
Perfect For Budget Minded Enthusiasts

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$11.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$3.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$702.99

The Pro-Billet Y-Block Distributor is built around a CNC-machined billet aluminum housing that is fit with a sealed ball bearing guide for stability and endurance. From timing accuracy, a maintenance-free magnetic pickup reliably triggers the MSD Ignition Control.

Product Features:

Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
QPQ coated polished steel shaft; guided by sealed ball bearings
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
Mech. advance assem. can be locked out for crank trigger systems
Advance weight pins are staked and tig welded to the plate
Nylon pads ensure smooth operation of the advance weights
Requires an MSD ignition control
May hit firewall seam on 57-59 full size cars.

from

$46.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

In-Demand Ignition Coils and Boots for 1957 Ford Thunderbirds

Select from 12 premium Ignition Coils and Boots parts for your 1957 Ford Thunderbird, with prices ranging from $34.49 to $101.99.

show more show less

from

$39.05

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
High temperature enameled wires were specified for better insulation and performance
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards

from

$101.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$65.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$41.49

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$35.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$34.49

Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:

High output
Long spark duration
High dielectric strength
Corrosion resistant connections
High reliability
Long service life

from

$78.99

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$76.99

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

12 Volt Coil
Oil-Filled Design
Arch Resistant Alkyd Top
Designed To Deliver Optimum Performance

from

$59.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for stock points or electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Metal Canister Is Filled w/Premium Grade Oil For Cooling
CARB E.O. Approved

from

$72.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$41.99

COIL

from

$41.49

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

Most Sold 1957 Ford Thunderbird Ignition Boots

Explore our best-selling Ford parts for the 1957 Thunderbird among 4 OEM and aftermarket options starting from $65.99.

show more show less

from

$89.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$65.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$72.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$176.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

Top-Rated Ignition and Tune-Up Products Brands For Your 1957 Ford Thunderbird

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1957 Ford Thunderbirds. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, Autolite, and Carquest, and more. Ignition and Tune-Up Products from these brands that fit a 1957 Thunderbird start at just $3.49 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 1957 Ford Thunderbird Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1957 Ford Thunderbird, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 1957 Ford Thunderbird. With over 2 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $8.49. Plus, with over 10 customer reviews and an average rating of 5 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$11.99

(1)

Iridium IX Spark Plug: Single Iridium Fine Wire, WR5IX

“This store is Great especially Doug at the Store !
Great Customer Service and knows all the right parts for my 5 vehicles !

Thankyou

JF”

from
$4.99

(9)

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, WR5

“NGK spark plugs always make a difference after installation. My old Mustang 200 6 cylinder loves them.”

Popular Autolite 1957 Ford Thunderbird Ignition and Tune-Up Products

Autolite auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1957 Ford Thunderbird owner should feel confident when installing genuine Autolite parts in their vehicle. To ensure the best fit and performance for your 1957 Thunderbird, Advance Auto Parts carries a full inventory of 2 Autolite Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Autolite Ignition and Tune-Up Products range from $3.49 to $4.49, plus, with more than 5 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from
$3.49

(4)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

“Really helped”

from
$4.49

(1)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

“They work great but the gap when they arrived was double what it should be. No big deal but 35ooo needed and 65ooo a big difference”

FAQs for 1957 Ford Thunderbird Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1957 Ford Thunderbirds?

Out of 57 Ignition and Tune-Up Products that fit 1957 Ford Thunderbirds, the following parts are the top sellers:

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, WR5 (19650100) – $4.99
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (5390141) – $3.49
Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (10027651) – $117.99

What’s the price range for 1957 Ford Thunderbird Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1957 Ford Thunderbird start at $1.29 and go up to $702.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1957 Ford Thunderbird?

The average price for Ignition and Tune-Up Products for the 1957 Ford Thunderbird is $61.19. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Thunderbird model years?

Yes, we currently carry Ignition and Tune-Up Products for 46 model years of Ford Thunderbirds between 1955 and 2005. Ignition and Tune-Up Products are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Ignition and Tune-Up Products for my 1957 Ford Thunderbird?

The cheapest 1957 Ford Thunderbird Ignition and Tune-Up Products we carry in stock are:

Copper Plus- Boxed – RF18YC (5470000) – $1.29
Spark Plug (BSF82C) (18090021) – $2.99
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (5390141) – $3.49
Copper Core Spark Plug (5391423) – $3.49
Distributor Rotor (12478034) – $3.49

What are the top-rated Ignition and Tune-Up Products that fit the 1957 Ford Thunderbird?

Out of 264 reviews by customers, our 1957 Ford Thunderbird Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1957 Ford Thunderbird and their top-rated products:

Ignition Wires
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- 7Mm Super Stock Copper Uni (5024072) – $53.09
Spark Plugs
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- 7Mm Super Stock Copper Uni (5024072) – $53.09

What types of Ignition and Tune-Up Products do you sell for my 1957 Ford Thunderbird?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1957 Ford Thunderbird:

Can I get help with 1957 Ford Thunderbird Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Thunderbird Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Thunderbird Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1957 Ford Thunderbird Ignition and Tune-Up Products

PerTronix – Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (Part No.1281)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1041)

ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Reliable Performance (Part No.R83TS)

Bosch – OE Finewire Platinum Spark Plug (Part No.F1000420685BOS)

Carquest – Distributor Rotor (Part No.D166)

Carquest Premium – Distributor Rotor (Part No.DAA1118)

Carquest – Distributor Cap (Part No.C275)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1893)

Accel – Custom Fit Spark Plug Wire Set (Part No.8854)

MSD Ignition – Wire Set; Street Fire; 8-cyl.; HEI/90f; Universal (Part No.5552)

Carquest Premium – Ignition Contact Set (Part No.AKA1008)

Carquest Premium – Ignition Contact Set (Part No.AKA1001)

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8094)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

Carquest Premium – Spark Plug Wire Set (Part No.35-8165)

Carquest Premium – Ignition Switch (Part No.CSC1711)

Carquest – Ignition Switch (Part No.CS96)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; HEI Cap (Part No.31189)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130801)

Cardone New – New Distributor (Part No.84-2892)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

DENSO – Coil On Plug Boots-8 (Part No.671-8166)

ACDelco – Ignition Coil (Part No.U505)

Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)

Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005417400MTR)

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, WR5 (Part No.2438)

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.46)

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, WR5IX (Part No.7510)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP46)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

Motorcraft – Spark Plug (BSF82CA) (Part No.SP-431-A)

ACDelco – Copper Core Spark Plug (Part No.R85TS)

Motorcraft – Spark Plug (BSF82C) (Part No.SP-431)

Motorcraft – Spark Plug (Part No.SP-431-X)

Champion – Copper Plus- Boxed – RF18YC (Part No.11)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Carquest – Distributor Rotor (Part No.D198)

Carquest – Distributor Cap (Part No.C154)

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Carquest Premium – Distributor Cap (Part No.CAC1056)

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Driveworks – Distributor Rotor (Part No.23050)

Carquest – Distributor Cap (Part No.24C1021)

Carquest – Distributor Rotor (Part No.23A1015)

MSD Ignition – Distributor; Pro Billet; Ford Y-Block (Part No.83831)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1035)

Carquest – Ignition Coil (Part No.E70)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Carquest – Ignition Coil (Part No.26C1078)

ACDelco – Ignition Coil (Part No.U505)

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

MSD Ignition – Coil; Blaster 2; with Ballast and Hardware (Part No.8203)

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Edelbrock – COIL (Part No.22739)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)