1957 Ford Ranchero Performance Engines
More 1957 Ford Ranchero Performance Engines
Find your specific 1957 Ford Ranchero original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1957 Ford Ranchero Performance Engines
Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6683)
from
$59.19
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.
Product Features:
See More
Product Features:
- Steel core provides rigidity, durability and prevents gasket push out
- Molded rubber coating seals minor irregularities in pan surface
- One piece design is easier to install and even less prone to leak
- Direct replacement suitable for all uses – street, racing, heavy duty
- Include both gasket and new oil pan bolts
- No Cork Particles
- Easy Removal For Disassembly
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Oil Pan Gasket (Part No.290)
from
$35.99
Mr. Gasket Performance Oil Pan Gaskets are manufactured from a high-density cork /rubber blend gasket material to provide excellent sealing and durability. For original equipment replacement and high performance street use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement and high performance street use
- Prevents Torque Loss
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1809)
from
$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5831)
from
$38.59
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5836)
from
$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Mr. Gasket – Intake Gasket (Part No.201G)
from
$35.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. Complete with manifold end seals and distributor gasket (where applicable). For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals and distributor gasket where applicable
- For OE replacement, high performance street, drag race and oval track use
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)
from
$165.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what
Product Features:
See More
Product Features:
- Clean positive seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
- Fits 1963-96 289/302/351W Engines
- 10-Pack Of Gaskets
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1228)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-74; w/4 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)
from
$28.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Mr. Gasket – Intake Gasket (Part No.214)
from
$36.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5834)
from
$38.59
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$19.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Edelbrock – RPM Air-Gap Small Block Ford Polished Intake Manifold (Part No.75811)
from
$772.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Improve performance on the street or race track. Larger cross-sectional area and taller card flange. Compatibility with lar
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Designed For Street And High Performance
- Larger Cross Sectional Area
- Taller Carb Flange
- Compatibility w/Large Displacement 351W Based Eng.
Weiand – Action +Plus; Intake Manifold (Part No.8010)
from
$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)
from
$359.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Edelbrock – Performer 351 Intake Manifold for Ford 351- 4V Cleveland (Part No.2665)
from
$442.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Edelbrock – RPM Air-Gap Small Block Ford 302 Black Intake Manifold (Part No.75213)
from
$576.99
Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8’s. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.3 in. Front Height, 4.9 in. Center Height, 5.5 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer 351-W Intake Manifold for S/B Ford 351 Windsor, Black Finish (Part No.21813)
from
$597.99
Edelbrock part #21813 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8’s. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.4 in. Front Height, 4.07 in. Center Height, 4.75 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)
from
$299.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
- Available in Multiple Finishes
Edelbrock – RPM Air-Gap Small Block Ford 351C Intake Manifold (Part No.7564)
from
$513.99
Product Features:
See More
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.48 in. Front Height, 5.02 in. Center Height, 5.56 in. Rear Height
- Satin Finish
- Non-EGR
Weiand – Hi-Ram; Intake Manifold (Part No.1993)
from
$636.99Product Features:
- Square Flange Carburetor Mounting
- Special D-Shaped Port Runner Design
- Large Plenum Chamber
Edelbrock – Performer 351 Intake Manifold for Ford 351- 2V Cleveland Engine (Part No.2750)
from
$416.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Popular 1957 Ford Ranchero Performance Engines Categories
1957 Ford Ranchero Performance Engines
Maybe you’re in the middle of a full rebuild of that 1957 Ford Ranchero. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 3 different Performance Engines in our inventory ranging from $27.49 to $875.99. That means you can find the exact parts or products you need to keep that 1957 Ford Ranchero running smoothly.
Performance Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1957 Ford Ranchero. FEL-PRO Performance and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1957 Ford Ranchero, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1957 Ford Ranchero rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1957 Ford Ranchero Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1957 Ford Ranchero demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Ranchero the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
FAQs for 1957 Ford Ranchero Performance Engines
What are the most purchased Performance Engines for the 1957 Ford Ranchero?
Out of 3 Performance Engines for the 1957 Ford Ranchero, the most popular in our inventory are:
from
$27.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets
from
$39.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
from
$875.99
This product is not rated
Performer 390 Intake Manifold for Ford FE, Polished Finish
Performance Intake Manifolds
