1957 Ford Ranchero Differentials

Name: Standard Open Spider Gear Kit For 8" And 9" Ford With 28 Spline Axles And 2-Pinion Design
Brand: Yukon Gear
SKU: 16031
Price: 285.99 USD

Find your specific 1957 Ford Ranchero original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1957 Ford Ranchero Differentials

from

$285.99

Yukon standard open spider gear kit for 8″ and 9″ Ford with 28 spline axles and 2-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Ford 8″ and 9″ open differential with 28 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pins and spider gear thrust washers.

from

$24.29

TAPERED ROLLER BEARI

from

$175.99

Product Features:

FRD 10BLT 9.0 R/P 4.11A MG

from

$51.99

One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:

Carrier race
Fits Ford 9″
Conversion race to install small bearing carrier into 3.250″ dropout

from

$9.99

8″ Ford O-ring.

Product Features:

Pinion support o-ring
Fits Ford 8″

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$249.99

Product Features:

Spider gear kit
Fits Ford 9″ 31 spline open differential
Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$8.99

Product Features:

Trac Loc spring for Ford 8″ and 9″

from

$5.99

Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:

Pinion support bolt for Ford 9″
3/8″ x 24 thread
1.5″ long

from

$31.99

Product Features:

MINI SPOOL 8″ & 9″ 31 SPLN STL 090431

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$219.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M88010 race
All steel construction

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

from

$3.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$6.69

CUP

from

$819.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8″ with 31 spline axles
Trac Loc positraction
Clutch style positraction
Smooth design
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$225.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Ford 9″ with Daytona pinion support
Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.

from

$44.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$249.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 9″ with LM104911 carrier races and Daytona pinion support
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, pilot bearing, thread locker, marking compound with brush and gasket.

from

$61.99

Chrome Moly cross pin shaft for Mini-Spool for 9″ Ford HD.

Product Features:

Cross pin shaft
Fits Ford 9″
Chromoly steel for added strength

from

$45.99

from

$21.99

Product Features:

Friction plate
Fits Ford 8″ and 9″ Trac Loc positraction

from

$8.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$127.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KT BRNG.&SEAL FORD MSTR 9

from

$269.99

Plain Silver aluminum pinion Supprt for 9″ Ford Daytona, HD 6061.

Product Features:

Fits Ford 9″ with 28 spline pinion
Larger inner pinion bearing reduces gear deflection under high load
Races installed
6061 aluminum

from

$533.99

Product Features:

NODULAR HOUSING 9″ FORD 3.062 BORE STRANGE # N1905

Popular 1957 Ford Ranchero Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Bearings

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Mini Spools

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Pinion Supports

Differential Spools

Differential Lock Springs

Differential Carrier Bearing Adjusters

Automatic Transmission Differential Cover Gaskets

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Lock Washers

Differential Pinion Bearing Spacers

Differential Bearing Adjuster Nut Lock Bolts

Differential Carrier Bearing Races

Maybe you’re in the middle of a full rebuild of that 1957 Ford Ranchero. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 313 different Differentials in our inventory ranging from $1.99 to $1,211.99. That means you can find the exact parts or products you need to keep that 1957 Ford Ranchero running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1957 Ford Ranchero. Driveworks, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1957 Ford Ranchero, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 217 reviews in this category, some of the top rated parts include Shaft Repair Sleeve with 5.0 stars and No-Slip Traction System with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1957 Ford Ranchero rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1957 Ford Ranchero Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1957 Ford Ranchero demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranchero the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1957 Ford Ranchero, our most popular Felpro Differentials include:

from $8.49

(9)

Differential Carrier Gasket

Automatic Transmission Differential Cover Gaskets

Top 1957 Ford Ranchero Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1957 Ford Ranchero. Popular Driveworks parts include:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $4.29

(1)

Oil Seal

Differential Pinion Seals

FAQs for 1957 Ford Ranchero Differentials

What are the most purchased Differentials for the 1957 Ford Ranchero?

Out of 313 Differentials for the 1957 Ford Ranchero, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $15.79

(3)

Multi Purpose Seal

Differential Pinion Seals

from $6.49

(1)

Differential Pinion Nut

Differential Pinion Shaft Nuts

What are the top-rated 1957 Ford Ranchero Differentials?

Top-rated Differentials for your 1957 Ford Ranchero based on customer reviews/ratings are:

from $43.99

(2)

Shaft Repair Sleeve

“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”

from $551.99

(1)

No-Slip Traction System

“Installed, no issues, works great.”

1957 Ford Ranchero Differentials

More 1957 Ford Ranchero Differentials

Essential 1957 Ford Ranchero Differentials

Yukon Gear – Standard Open Spider Gear Kit For 8" And 9" Ford With 28 Spline Axles And 2-Pinion Design (Part No.16031)

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

Motive Gear – Differential Ring and Pinion (Part No.F9-411A)

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

Yukon Gear – 8" Ford O-Ring (Part No.30027)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Bearing Race Driver (Part No.56023)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pro-King – Differential Cover Gasket (Part No.762B303)

FAG US – CUP (Part No.LM67010)

Yukon Gear – Trac-Loc For Ford 8" Wtih 31 Spline Axles – Street Design (Part No.26004)

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)

Motive Gear – Differential Gear Install Kit (Part No.F8IK)

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37039)

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 9" Ford (Part No.32235)

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)

Yukon Gear – Trac Loc Friction Plate, 4 Tab (Part No.16177)

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R9RMK)

Yukon Gear – Silver Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32037)

Motive Gear – Nodular Differential Housing (Part No.26306)

Popular 1957 Ford Ranchero Differentials Categories