1957 Ford F-350 Pickup Brake Parts

Essential 1957 Ford F-350 Pickup Brake Parts

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Carquest Wearever – Brake Shoes (Part No.S583)

Brake Shoes

from

$51.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Brake Shoes (Part No.S228)

Brake Shoes

from

$35.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Brake Shoes (Part No.S33)

Brake Shoes

from

$40.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

ACDelco – Riveted Rear Drum Brake Shoe Set (Part No.17583R)

Riveted Rear Drum Brake Shoe Set

from

$80.99
ACDelco (Professional) Gold Riveted Brake Shoes are the high quality alternative to Original Equipment (OE) parts. Engineered with a premium dipped coating to help resist corrosion and premature wear, they provide superior performance. These riveted brakes deliver the highest possible shear strength while reducing noise and vibration. For GM vehicle application, the chamfer angle and vane configuration follow the OE design. Also, no machining is required. ACDelco Professional Riveted Brake Shoes are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Quality validated for proper metallurgy and correct brake plate thickness
  • Non-directional brake surface finish for consistent braking
  • All shoes are machined for correct shoe-to-drum contact
  • Highest shear strength for the best bond integrity
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-73515)

Vacuum Brake Booster: Without Master Cylinder

from

$86.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74400)

Vacuum Brake Booster: Without Master Cylinder

from

$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-73112)

Vacuum Brake Booster: Without Master Cylinder

from

$107.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Hydro-Vac Power Brake Booster (Part No.51-9111)

Hydro-Vac Power Brake Booster

from

$276.99
Our remanufactured Power Brake Boosters are built to match original performance standards. Every unit is completely disassembled, cleaned, inspected and renewed with O.E.-quality components. Reverse engineering provides insight into why the unit failed, often resulting in an improved product. All units are 100% tested to ensure proper fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Brake Master Cylinder MCA390336: New, With Reservoir (Part No.MCA390336)

Brake Master Cylinder MCA390336: New, With Reservoir

from

$97.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are “hard anodized”
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
See More

Carquest Wearever – Brake Master Cylinder MCA39876: New, With Reservoir (Part No.MCA39876)

Brake Master Cylinder MCA39876: New, With Reservoir

from

$111.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are “hard anodized”
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-2008)

Remanufactured Brake Master Cylinder

from

$23.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1638)

Remanufactured Brake Master Cylinder

from

$24.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA35326)

Drum Brake Wheel Cylinder

from

$18.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37262)

WHEEL CYLINDER

from

$17.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA41718)

WHEEL CYLINDER

from

$18.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA18985)

Drum Brake Wheel Cylinder

from

$18.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1108-2)

Brake Spring Hold-Down Pin

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1107-2)

Brake Spring Hold-Down Pin

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly (Part No.1534)

Drum Brake Adjusting Screw Assembly

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly (Part No.1535)

Drum Brake Adjusting Screw Assembly

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
See More

Carquest Wearever – Drum Adjusting screws with tip (Part No.H1500)

Drum Adjusting screws with tip

from

$6.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

1957 Ford F-350 Pickup Brake Parts

You count on your 1957 Ford F-350 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 10 Brake Parts ranging in price from $2.49 to $276.99, you’re sure to find everything you need for your 1957 Ford F-350 Pickup.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 3 different brands like Cardone, Carquest, and Wearever. 1957 Ford F-350 Pickup Brake Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 96 extensive product reviews on 1957 Ford F-350 Pickup Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1957 Ford F-350 Pickup below to get started!

Top-Rated Brake Parts Brands For Your 1957 Ford F-350 Pickup

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Ford F-350 Pickup running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Wearever, and even more.

Popular Carquest Wearever Brake Parts

You’ll find popular Carquest Wearever brand products across Brake Hardware Parts. All are waiting to get your 1957 Ford F-350 Pickup back on the road. Some of the top-rated Carquest Wearever products in these categories are:
Brake Spring Hold-Down Pin
from $2.49
(1)
Brake Spring Hold-Down Pin
Brake Pin Or Anchors
Brake Hold-Down Spring Cup
from $3.79
(5)
Brake Hold-Down Spring Cup
Hold Down Spring Top Cup

Top-Rated Brake Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Brake Parts for your 1957 Ford F-350 Pickup, and some of our most reviewed parts include:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1957 Ford F-350 Pickup Brake Parts

What are the most purchased Brake Parts for the 1957 Ford F-350 Pickup?

Out of 10 Brake Parts for the 1957 Ford F-350 Pickup, the most popular in our inventory are:
Brake Shoes
from $40.99
This product is not rated
Brake Shoes
Rear Brake Pads and Shoes
WHEEL CYLINDER
from $52.99
This product is not rated
WHEEL CYLINDER
Brake Wheel Cylinders
WHEEL CYLINDER
from $52.99
This product is not rated
WHEEL CYLINDER
Brake Wheel Cylinders