1957 Ford F-350 Drivetrains
Find Your Specific 1957 Ford F-350 Drivetrains
Below you will find various in-demand Ford Drivetrains, components and accessories for your 1957 F-350. Advance Auto Parts has popular F-350 parts like Drive Shafts and Axles, Transfer Cases, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other F-350 model years including
1954,
1955,
1956,
1958,
1977,
1978,
1979,
1990,
1991 and more. Select a category of 1957 Ford F-350 Drivetrains below and start saving instantly.
Popular 1957 Ford F-350 Drivetrains Categories
Essential Drivetrains for 1957 Ford F-350s
Driveworks – Universal Joint (Part No.DW-331BL)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)
from
$102.99
Axle Shft Univ Joint
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Multi Purpose Seal (Part No.7412S)
from
$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.473468)
from
$19.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.471869)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 375, 430, 434 & 498
- Fits 1-1/8″ bearings
Yukon Gear – 1480 U-Bolt Kit (Part No.41191)
National – Bearings (Part No.28622)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-362-A)
National – Bearings (Part No.382S)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver (Part No.30226)
from
$30.99
7.5″, 8″, 8.8″, 9″, 10.25″ Ford REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Ford 7.5″, 8.8″, 9″ and 10.25″
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
National – Bearings (Part No.1308-L)
from
$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.307-L)
from
$37.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – (2) Chrome Moly Superjoints, Replacement For Dana 60 (Part No.32087)
from
$974.99
Product Features:
See More
- Fits Dana Spicer 60
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- Two complete joints and eight full circle snap rings
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
SKF – Driveshaft Support (Part No.K10301069521SKF)
from
$89.23
Driveshaft Support
National – Bearings (Part No.88508)
from
$45.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
FAG US – HANGER BEARING (Part No.CH0158)
from
$44.49
HANGER BEARING
Upgrade your 1957 Ford F-350 with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1957 Ford F-350, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your F-350 functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Drivetrains for the 1957 Ford F-350, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1957 Ford F-350 at great prices.
Our Drivetrains inventory for this model
ranges from just $8.49 to $148.99, with
an average price of $44.30.
Our 21 Drivetrains in stock come from 6 trusted brands, so you’re sure to find the right part for your 1957 Ford F-350 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Ford F-350, we stock popular OEM and aftermarket Drivetrains from top names
like Spicer, Moog, Driveworks, and more.
Spicer Drivetrains
start at just $28.99 and boast an impressive 5 stars average rating from customers.
Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $8.49, and at an average 4 stars rating.
With 675 customer reviews and counting, our 1957 Ford F-350 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals
and more to make sure your 1957 Ford F-350 is always ready to roll. We’re committed to providing you with everything you need to keep your F-350 in top shape, all in one place.
Start shopping confidently below for your 1957 Ford F-350!
Best-Selling Drive Shafts and Axles for 1957 Ford F-350s
Enhance the driving experience in your Ford with 6 quality Drive Shafts and Axle components, starting at $22.79.
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
National – Bearings (Part No.307-L)
from
$37.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Spicer – Center Support Bearing (Part No.211175X)
from
$55.99
Center Support Bearing
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Most Popular 1957 Ford F-350 Transfer Cases
Customize your Ford with 1 Transfer Cases products
like Input Shaft Seals, all
priced under $19.29.
National – Multi Purpose Seal (Part No.473468)
from
$19.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Top Picks for 1957 Ford F-350 Differentials
Upgrade Ford F-350s with top-quality Differentials parts, including 8 OEM and aftermarket selections for your 1957 model.
National – Bearings (Part No.28622)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Tapered Roller Bearing (Part No.S-362-A)
National – Bearings (Part No.387A)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
In-Demand Universal Joints for 1957 Ford F-350s
Select from 6 premium Universal Joints parts for your 1957 Ford F-350, with prices ranging from $9.99 to $32.99.
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 353, 354, 361, 369 & 497
- Fits 1-1/16″ bearings
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Driveworks – Universal Joint (Part No.DW-369)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Top-Rated Drivetrains Brands For Your 1957 Ford F-350
Shop for the best-rated brands offering Drivetrains and other products for your 1957 Ford F-350s. Below you’ll find some of our best rated Drivetrains from Spicer, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1957 F-350 start at just $8.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Spicer 1957 Ford F-350 Drivetrains
When it comes to maintaining or upgrading your 1957 Ford F-350, using quality Drivetrains is essential to ensure durability and a perfect fit. Spicer ticks all of those boxes. We offer a wide selection of Spicer Drivetrains, specifically designed for the 1957 Ford F-350. With over 4 Spicer brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $41.49. Plus, with over 14 customer reviews and an average rating of 5 stars, you can trust that our Spicer Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$28.99
$28.99
(12)
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
Popular Moog 1957 Ford F-350 Drivetrains
Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1957 Ford F-350 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1957 F-350, Advance Auto Parts carries a full inventory of 4 Moog Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Moog Drivetrains range from $9.99 to $32.99, plus, with more than 151 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$9.99
$9.99
(4)
“I used these to replace the factory originals that had over 80K miles on a 1964 Chevelle Malibu. I had a strange click in the differential area and s”
FAQs for 1957 Ford F-350 Drivetrains
Which Drivetrains are best-sellers for 1957 Ford F-350s?
Out of 21 Drivetrains that fit 1957 Ford F-350s, the following parts are the top sellers:
- Universal Joint (10265714) – $15.99
- Center Support Bearing Motor Mount: Center, 1 Piece (5300924) – $22.79
- 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
What’s the price range for 1957 Ford F-350 Drivetrains?
Drivetrain prices for the 1957 Ford F-350 start at $8.49 and go up to $148.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1957 Ford F-350?
The average price for Drivetrains for the 1957 Ford F-350 is $44.30. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Ford F-350 model years?
What are the cheapest Drivetrains for my 1957 Ford F-350?
The cheapest 1957 Ford F-350 Drivetrains we carry in stock are:
- Tapered Roller Bearing (10659468) – $8.49
- Universal Joint U-Bolt Kit (10086968) – $9.99
- Universal Joint (10265714) – $15.99
- Bearings (3273504) – $17.49
- Multi Purpose Seal (3270092) – $19.29
What are the top-rated Drivetrains that fit the 1957 Ford F-350?
Out of 675 reviews by customers, our 1957 Ford F-350 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1957 Ford F-350 and their top-rated products:
- Universal Joints
- Universal Joint (10855076) – $28.99
- Universal Joint U-Bolt Kit (10086968) – $9.99
- Non-Greaseable Super Strength Universal Joint (10087061) – $32.99
- Differentials
- Universal Joint (10855076) – $28.99
- Universal Joint U-Bolt Kit (10086968) – $9.99
- Non-Greaseable Super Strength Universal Joint (10087061) – $32.99
What types of Drivetrains do you sell for my 1957 Ford F-350?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1957 Ford F-350:
Can I get help with 1957 Ford F-350 Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.
What is your return policy for Ford F-350 Drivetrains?
Advance Auto Parts keeps returns simple. For new Ford F-350 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
