1957 Ford Custom Ignition and Tune-Up Products

Name: Ignition Tune-Up Kit
Brand: Carquest Premium
SKU: CBA1835
Price: 18.99 USD

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1957 Custom. Advance Auto Parts has popular Custom parts like Ignition Wires, Distributors, Ignition Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Custom model years including 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and more. Select a category of 1957 Ford Custom Ignition and Tune-Up Products below and start saving instantly.

Popular 1957 Ford Custom Ignition and Tune-Up Products Categories

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Spark Plug Non-Foulers

Distributor Vacuum Advances

Points and Condensers and Kits

Ignition Tune-up Kits

Distributor Gears

Essential Ignition and Tune-Up Products for 1957 Ford Customs

from

$18.99

The Ignition Tune-Up Kit provides the needed parts required to return the ignition system primary circuit to its original operating condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$10.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$15.99

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$431.99

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

PerTronix D130711 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Vacuum Advance Red Male Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$417.99

PerTronix D130811 Flame-Thrower Electronic Distributor Billet Ford Small Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$135.99

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$135.99

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$51.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$40.99

Product Features:

PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
Replacement Part (only) for PerTronix Flame Thrower Distributors

from

$31.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$142.99

A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$46.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$172.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$53.09

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$199.99

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$63.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$46.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$99.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, allowing it to withstand high temperatures and pressures for extended durability. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is designed to deliver consistent ignition and efficiency. Both the center and ground electrode tips are crafted from platinum, ensuring robust functionality and reliability. Ideal for drivers seeking enhanced engine performance and longevity, this spark plug is built to meet the demands of modern engines.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type to ensure consistent ignition and improved engine efficiency.

from

$2.79

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for optimal performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. Resistant to oxidation and arc erosion, they feature a multi-rib insulator to protect against misfires and offer service intervals of up to 100,000 miles. Designed with high-quality materials, Motorcraft Spark Plugs ensure reliable performance for a broad range of applications, including domestic and import cars and trucks of all makes and sizes. Backed by Motorcraft’s Service Parts Warranty, they are an exact fit for Ford, Lincoln, and Mercury vehicles, helping to prevent false check engine lights and providing the same quality as the original components installed during manufacturing.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Fuel Efficiency: These spark plugs help reduce fuel consumption, optimizing emissions and contributing to a more efficient engine performance.

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$38.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$88.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

Upgrade your 1957 Ford Custom with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1957 Ford Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Ignition and Tune-Up Products for the 1957 Ford Custom, designed to meet your needs without breaking the bank. From Ignition Wire replacements to Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1957 Ford Custom at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $1.29 to $749.99, with an average price of $65.81. Our 65 Ignition and Tune-Up Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1957 Ford Custom without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Ford Custom, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, PerTronix, Accel, and more. NGK Ignition and Tune-Up Products start at just $6.99 and boast an impressive 4.8 stars average rating from customers. PerTronix and Accel also bring quality to the table, with Ignition and Tune-Up Products available starting at $53.09, and at an average 4.3 stars rating. With 330 customer reviews and counting, our 1957 Ford Custom Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1957 Ford Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place. Start shopping confidently below for your 1957 Ford Custom!

Best-Selling Ignition Wires for 1957 Ford Customs

Enhance the driving experience in your Ford with 9 quality Ignition Wire components, starting at $53.09.

show more show less

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$110.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$53.09

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$79.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

Most Popular 1957 Ford Custom Distributors

Customize your Ford with 14 Distributors products like Distributor Rotor Buttons, Distributor Cap Kits, and Distributors, all priced under $749.99.

show more show less

from

$9.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$5.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$16.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$52.99

All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:

Supplied w/Heavy Duty Rotor
Low Resistance Terminals
Full Power Output At High RPM
Perfect For Budget Minded Enthusiasts

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$13.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$4.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$14.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.79

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$749.99

The Pro-Billet Y-Block Distributor is built around a CNC-machined billet aluminum housing that is fit with a sealed ball bearing guide for stability and endurance. From timing accuracy, a maintenance-free magnetic pickup reliably triggers the MSD Ignition Control.

Product Features:

Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
QPQ coated polished steel shaft; guided by sealed ball bearings
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
Mech. advance assem. can be locked out for crank trigger systems
Advance weight pins are staked and tig welded to the plate
Nylon pads ensure smooth operation of the advance weights
Requires an MSD ignition control
May hit firewall seam on 57-59 full size cars.

from

$46.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$39.99

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Distributor Drive Gear No. 22736 For SB Ford 289-302 With 0.467" Diameter Shaft

from

$34.99

Edelbrock Part No. 22736 is a steel drive gear for use on part No. 22755 Max-Fire Distributor, in Small-Block Ford 289-302 engines that are running a hydraulic roller camshaft with a billet steel core. This steel distributor drive gear is designed specifically for our small-block Ford Max-Fire Ready-to-Run distributor with 0.467″ diameter shaft and 1/4″ hex oil pump drive. This drive gear has an overall diameter of 1-1/4″ (1.249″) and is an optional replacement part for the iron (orange dot) gear that comes installed with part No. 22755 kit. Features a white paint dot for identification.

Top Picks for 1957 Ford Custom Ignition Boots

Upgrade Ford Customs with top-quality Ignition Boots parts, including 4 OEM and aftermarket selections for your 1957 model.

show more show less

from

$89.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$63.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$176.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

In-Demand Ignition Coils and Boots for 1957 Ford Customs

Select from 9 premium Ignition Coils and Boots parts for your 1957 Ford Custom, with prices ranging from $39.99 to $83.99.

show more show less

from

$39.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$43.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$79.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$83.99

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

12 Volt Coil
Oil-Filled Design
Arch Resistant Alkyd Top
Designed To Deliver Optimum Performance

from

$65.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for stock points or electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Metal Canister Is Filled w/Premium Grade Oil For Cooling
CARB E.O. Approved

from

$79.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$46.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$46.99

Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.

Product Features:

output of 42000V

Most Sold 1957 Ford Custom Spark Plugs

Explore our best-selling Ford parts for the 1957 Custom among 13 OEM and aftermarket options starting from $1.29.

show more show less

from

$6.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$4.29

Autolite Copper spark plugs are designed to deliver reliable performance, ensuring quick starts and the power your vehicle demands. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended life. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering increased strength and durability. With a nickel-plated shell, these spark plugs resist corrosion for long-lasting performance. Engineered for optimal fuel economy, they help improve mileage while delivering smooth and responsive acceleration. Compliant with Original Equipment Service (OES) design Standards, they ensure dependable operation and a secure fit with their tapered seat type. The long projection center electrode and nickel tip materials further enhance their efficiency and reliability, making them a valuable addition to your vehicle’s ignition system.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel consumption, these spark plugs help you achieve better mileage.
Smooth Acceleration: Experience smoother and more responsive acceleration with Autolite Copper Core spark plugs.
OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring reliable performance.
Tapered Seat Type: Featuring a tapered seat type, these spark plugs provide a secure fit and optimal performance.

from

$10.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.49

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$99.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$4.99

Autolite Platinum spark plugs are crafted for exceptional performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced acceleration while boosting fuel efficiency. The platinum firing tip resists gap erosion, extending the service life, while the high alumina ceramic insulator provides superior thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers corrosion resistance for long-lasting reliability. Designed with a tapered seat type, these spark plugs enhance performance and durability, ensuring a consistent and powerful spark. With a long projection center electrode and a performance-grade design, Autolite Platinum spark plugs deliver reliable ignition and optimal engine efficiency, making them a valuable upgrade for maintaining peak engine performance.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Tapered Seat Type: Enhances performance and durability for a longer-lasting spark plug.

from

$4.79

Standard Spark Plug (BSF82CA) delivers reliable performance and durability, making it the ideal choice for maintaining your vehicle’s original equipment standards. Engineered specifically for Ford, Lincoln, and Mercury vehicles, these spark plugs ensure an exact fit while enhancing durability, reducing misfires, optimizing emissions, and improving fuel efficiency. Resistant to oxidation and arc erosion, they are built with high-quality materials to withstand demanding conditions and provide service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while Motorcraft ignition components help prevent false check engine lights, giving you confidence in your vehicle’s performance. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are the same trusted components found in your vehicle at the time of manufacture, ensuring reliable performance for a wide range of domestic and import cars and trucks.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$3.99

ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$2.79

The Standard Spark Plug by Motorcraft is the same high-quality part installed when your engine first rolled off the assembly line, ensuring a perfect fit and optimal performance. Designed with a 30,000-mile service interval, it features a copper core electrode and a nickel chromium alloy side electrode, providing exceptional heat dissipation and long-lasting durability. The built-in resistor minimizes radio frequency interference (RFI) while reducing electrode erosion, ensuring consistent performance over time. Its copper-glass seal securely bonds the insulator and terminal post center electrode, delivering the full required voltage at the spark gap while maintaining a gas-tight seal. With a tapered seat type for precise installation, this spark plug is engineered to meet the high standards set by Ford Motor Company, making it a reliable choice for maintaining your vehicle’s performance.

Product Features:

Same part installed when the engine rolled off the assembly line
30,000-mile service interval
Copper core electrode and nickel chromium alloy side electrode for excellent heat dissipation and durability.
Resistor reduces radio frequency interference (RFI) and electrode erosion
Copper-glass seal bonds insulator and terminal post center electrode together to ensure full required voltage at spark gap and a gas-tight seal

from

$4.99

The Spark Plug with a standard center electrode design and durable nickel construction ensures reliable ignition performance for your vehicle. Featuring a nickel center electrode tip and a nickel ground electrode tip, this spark plug is built for consistent conductivity and long-lasting durability. Its tapered seat type provides a secure fit, enhancing overall engine efficiency and performance. Designed to deliver dependable starts and smooth operation, this spark plug is an excellent choice for maintaining your vehicle’s ignition system. With its robust materials and precise engineering, it offers great value and reliability for everyday driving needs.

Product Features:

Standard center electrode design ensures consistent ignition performance for reliable engine starts.
Nickel center and ground electrode tips provide excellent conductivity and enhanced durability for long-lasting use.
Tapered seat type offers a secure fit, improving engine efficiency and overall performance.
Precisely engineered to deliver smooth operation and dependable ignition for everyday driving needs.
Constructed with robust materials to ensure reliability and value for maintaining your vehicle’s ignition system.

from

$2.49

Copper Plus Spark Plug RF14YC delivers dependable performance and durability, making it a reliable choice for your vehicle’s ignition system. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The patented TinTac and ULTRASEAL coated shell provide superior corrosion resistance, safeguarding the plug against harsh conditions. Additionally, the SAC-9 semiconductor resistor effectively suppresses EMI and RFI, ensuring smooth engine operation without interference. Built to ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with a wide range of vehicles. Whether you’re seeking improved ignition efficiency or extended durability, this spark plug offers exceptional value and reliability for your automotive needs.

Product Features:

Copper Plus – Dependable Performance.
Copper core center electrode allows for accurate control of heat range for longer life
Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
Built to ISO and SAE standards for proven performance

from

$1.29

Copper Plus Spark Plug RF18YC delivers dependable performance and durability, making it a reliable choice for your vehicle’s ignition system. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The patented TinTac and ULTRASEAL coated shell provide superior corrosion resistance, while the SAC-9 semiconductor resistor effectively suppresses EMI and RFI for optimal engine performance. Built to ISO and SAE Standards, this spark plug guarantees proven reliability and compatibility with a wide range of vehicles. Its tapered seat type ensures a secure fit, contributing to efficient combustion and smooth operation. Designed for drivers seeking quality and value, this spark plug combines advanced engineering with robust materials to keep your engine running at its best.

Product Features:

Copper Plus – Dependable Performance.
Copper core center electrode allows for accurate control of heat range for longer life
Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
Built to ISO and SAE standards for proven performance

Top-Rated Ignition and Tune-Up Products Brands For Your 1957 Ford Custom

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1957 Ford Customs. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, PerTronix, and Accel, and more. Ignition and Tune-Up Products from these brands that fit a 1957 Custom start at just $6.99 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 1957 Ford Custom Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1957 Ford Custom, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 1957 Ford Custom. With over 2 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $9.74. Plus, with over 10 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.99

(9)

V-Power Nickel Spark Plug (WR5): Reliable Performance & Quick Starts

“NGK spark plugs always make a difference after installation. My old Mustang 200 6 cylinder loves them.”

from $12.49

(1)

Iridium IX Spark Plug (WR5IX): Extreme Ignitability & Durability

“This store is Great especially Doug at the Store ! Great Customer Service and knows all the right parts for my 5 vehicles ! Thankyou JF”

Popular PerTronix 1957 Ford Custom Ignition and Tune-Up Products

PerTronix auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1957 Ford Custom owner should feel confident when installing genuine PerTronix parts in their vehicle. To ensure the best fit and performance for your 1957 Custom, Advance Auto Parts carries a full inventory of 3 PerTronix Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these PerTronix Ignition and Tune-Up Products range from $125.99 to $192.99, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $192.99

(1)

91261 Ignitor II Adaptive Dwell Control Ford 6 cyl

“bolted right in – only took a few minutes – set the timing – runs great”

from $125.99

(2)

Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy

“Only fits stock distributor. I have aftermarket one. Need to buy oem”

from $183.99

(2)

91281 Ignitor II Adaptive Dwell Control Ford 8 cyl

“I installed this part in my classic 1967 Galaxie to improve performance. I think it provides better spark to the cylinders.”

FAQs for 1957 Ford Custom Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1957 Ford Customs?

Out of 65 Ignition and Tune-Up Products that fit 1957 Ford Customs, the following parts are the top sellers:

V-Power Nickel Spark Plug (WR5): Reliable Performance & Quick Starts (19650100) – $6.99
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390141) – $4.29
Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (10027651) – $125.99

What’s the price range for 1957 Ford Custom Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1957 Ford Custom start at $1.29 and go up to $749.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1957 Ford Custom?

The average price for Ignition and Tune-Up Products for the 1957 Ford Custom is $65.81. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Custom model years?

Yes, we currently carry Ignition and Tune-Up Products for 16 model years of Ford Customs between 1949 and 1976. Ignition and Tune-Up Products are bought most frequently for the following model years: 1976, 1975, 1974, 1973, 1972, 1971, 1970, 1969, and 1968.

What are the cheapest Ignition and Tune-Up Products for my 1957 Ford Custom?

The cheapest 1957 Ford Custom Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RF18YC): Dependable Performance & Durability (5470000) – $1.29
Copper Plus Spark Plug (RF14YC): Dependable Performance & Durability (89011699) – $2.49
Standard Spark Plug: Excellent Heat Dissipation & Durability (18090021) – $2.79
Copper Core Spark Plug: Reliable Performance & Durability (5391423) – $3.99
Distributor Rotor (11440037) – $4.05

What are the top-rated Ignition and Tune-Up Products that fit the 1957 Ford Custom?

Out of 330 reviews by customers, our 1957 Ford Custom Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1957 Ford Custom and their top-rated products:

Ignition Coils and Boots
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250137) – $39.99
Ignition Wires
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250137) – $39.99
Spark Plugs
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250137) – $39.99

What types of Ignition and Tune-Up Products do you sell for my 1957 Ford Custom?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1957 Ford Custom:

Can I get help with 1957 Ford Custom Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Custom Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Custom Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1957 Ford Custom Ignition and Tune-Up Products

Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

Carquest Premium – Distributor Rotor (Part No.DAA1008)

Carquest Premium – Ignition Contact Set (Part No.AKA1001)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130711)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D130811)

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

PerTronix – 1266 Ignitor Ford 6 cyl pre-1965 (Part No.1266)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1041)

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

Carquest Premium – Ignition Coil (Part No.EBC1521)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

MSD Ignition – Distributor Gear; Ford 302; non-EFI; Steel (Part No.85833)

MSD Ignition – Distributor Gear; Ford 351C; 460; Iron (Part No.85812)

MSD Ignition – Wire Set; Super Conductor; Ford 351C-400; Socket (Part No.31389)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

MSD Ignition – Wire Set; Super Conductor; Ford 351C-460 with HEI Cap (Part No.35389)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

PerTronix – D4050 Flame-Thrower HEI Distributor Cap Black (Part No.D4050)

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP25)

Motorcraft – Spark Plug: Enhances Durability & Reduces Fuel Consumption (Part No.SP-425)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8196)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

Carquest – Distributor Rotor (Part No.D198)

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Carquest Premium – Distributor Cap (Part No.CAC1056)

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Driveworks – Distributor Rotor (Part No.23050)

Carquest – Distributor Cap (Part No.24C1021)

Carquest – Distributor Rotor (Part No.23A1015)

Carquest Premium – Distributor Cap (Part No.CAC1066)

Carquest Premium – Distributor Rotor (Part No.DAA1009)

Carquest – Distributor Cap (Part No.24C1029)

MSD Ignition – Distributor; Pro Billet; Ford Y-Block (Part No.83831)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1035)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1039)

Edelbrock – Distributor Drive Gear No. 22736 For SB Ford 289-302 With 0.467" Diameter Shaft (Part No.22736)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

ACDelco – Ignition Coil (Part No.U505)

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

MSD Ignition – Coil; Blaster 2; with Ballast and Hardware (Part No.8203)

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)

NGK – V-Power Nickel Spark Plug (WR5): Reliable Performance & Quick Starts (Part No.2438)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.46)

Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)

NGK – Iridium IX Spark Plug (WR5IX): Extreme Ignitability & Durability (Part No.7510)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP46)

Motorcraft – Standard Spark Plug (BSF82CA): Reliable Performance & Durability (Part No.SP-431-A)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R85TS)

Motorcraft – Standard Spark Plug: Excellent Heat Dissipation & Durability (Part No.SP-431)

Motorcraft – Spark Plug: Reliable Ignition & Durable Nickel Construction (Part No.SP-431-X)

Champion – Copper Plus Spark Plug (RF14YC): Dependable Performance & Durability (Part No.21)

Champion – Copper Plus Spark Plug (RF18YC): Dependable Performance & Durability (Part No.11)