1957 Ford Club Performance and Racing Products
Find Your Specific 1957 Ford Club Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1957 Club. Advance Auto Parts has popular Club parts like Performance Distributors, Performance Oil Filters, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Club model years including
1953,
1954,
1955,
1956,
1958,
1959 and more. Select a category of 1957 Ford Club Performance and Racing Products below and start saving instantly.
Popular 1957 Ford Club Performance and Racing Products Categories
Essential Performance and Racing Products for 1957 Ford Clubs
Accel – Module:Eliminator Replacement (Part No.2005)
from
$91.99
Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Most Accurate Ignition Timing System
- Improves Performance And Fuel Economy
- Easy To Install With Simple Hand Tools
- Reduced Maintenance
- Eliminates Changing Points
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Edelbrock – Sure Seat Valve Springs for Ford 289-302 (Part No.5822)
from
$54.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5896)
from
$125.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)
from
$774.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)
from
$569.99
MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
MSD Ignition – Distributor; Flathead Ford; Ready-to-Run; 49-53 (Part No.8573)
from
$757.99
Early flathead racers and cruisers alike will be excited to see these front mount flathead distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances. The distributor is topped off with our own crab cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD’s adjustable mechanical advance. This assembly features chromoly construction with Tig-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your flathead’s specs. Just under the advance is MSD’s race-proven magnetic pick-up. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition control. Bring your flathead up to date with MSD Performance.
Product Features:
See More
Product Features:
- Designed for 1949-1953 8-BA Ford Flathead engines
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Accepts Cap-A-Dapts
- Supplied w/HEI style dist. cap/rotor/gear/roll pin/setup spacer
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$48.49
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Accel – Contact And Condenser Kit (Part No.8203)
from
$79.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mr. Gasket – Dust Cap (Part No.2485)
from
$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Upgrade your 1957 Ford Club with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1957 Ford Club, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Club functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Performance and Racing Products for the 1957 Ford Club, designed to meet your needs without breaking the bank.
From
Performance Distributor
replacements to
Performance Oil Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1957 Ford Club at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $12.09 to $774.99, with
an average price of $96.62.
Our 15 Performance and Racing Products in stock come from 5 trusted brands, so you’re sure to find the right part for your 1957 Ford Club without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Ford Club, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory Accel, and more.
Mallory Performance and Racing Products
start at just $30.49 and boast an impressive 5 stars average rating from customers.
With 125 customer reviews and counting, our 1957 Ford Club Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1957 Ford Club is always ready to roll. We’re committed to providing you with everything you need to keep your Club in top shape, all in one place.
Start shopping confidently below for your 1957 Ford Club!
Best-Selling Performance Distributors for 1957 Ford Clubs
Enhance the driving experience in your Ford with 1 quality Performance Distributor components, starting at $774.99.
MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)
from
$774.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
Most Popular 1957 Ford Club Performance Oil Filters
Customize your Ford with 1 Performance Oil Filters products
like Performance Oil Filters, all
priced under $97.99.
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
Top Picks for 1957 Ford Club Performance Ignition Products
Upgrade Ford Clubs with top-quality Performance Ignition Products parts, including 9 OEM and aftermarket selections for your 1957 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Contact And Condenser Kit (Part No.8203)
from
$79.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Module:Eliminator Replacement (Part No.2005)
from
$91.99
Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Most Accurate Ignition Timing System
- Improves Performance And Fuel Economy
- Easy To Install With Simple Hand Tools
- Reduced Maintenance
- Eliminates Changing Points
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$48.49
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
In-Demand Performance Engines for 1957 Ford Clubs
Select from 2 premium Performance Engines parts for your 1957 Ford Club, with prices ranging from $54.99 to $125.99.
Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5896)
from
$125.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Sure Seat Valve Springs for Ford 289-302 (Part No.5822)
from
$54.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Most Sold 1957 Ford Club Performance Radiators
Explore our best-selling Ford parts for the 1957 Club among 1 OEM and aftermarket options starting from $48.09.
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Top-Rated Performance and Racing Products Brands For Your 1957 Ford Club
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1957 Ford Clubs. Below you’ll find some of our best rated Performance and Racing Products from Mallory and Accel, and more. Performance and Racing Products from these brands that fit a 1957 Club start at just $30.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1957 Ford Club Performance and Racing Products
When it comes to maintaining or upgrading your 1957 Ford Club, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1957 Ford Club. With over 4 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49, with an average price of just $109.44. Plus, with over 4 customer reviews and an average rating of 5 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$85.29
$85.29
(3)
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular Accel 1957 Ford Club Performance and Racing Products
Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1957 Ford Club owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1957 Club, Advance Auto Parts carries a full inventory of 5 Accel Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Accel Performance and Racing Products range from $42.49 to $105.99, plus, with more than 55 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1957 Ford Club Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1957 Ford Clubs?
Out of 15 Performance and Racing Products that fit 1957 Ford Clubs, the following parts are the top sellers:
- Thermocap Radiator Cap (10648825) – $48.09
- Dust Cap (22901302) – $12.09
- Supercoil (5024250) – $105.99
What’s the price range for 1957 Ford Club Performance and Racing Products?
Performance and Racing Product prices for the 1957 Ford Club start at $12.09 and go up to $774.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1957 Ford Club?
The average price for Performance and Racing Products for the 1957 Ford Club is $96.62. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Club model years?
What are the cheapest Performance and Racing Products for my 1957 Ford Club?
The cheapest 1957 Ford Club Performance and Racing Products we carry in stock are:
- Dust Cap (22901302) – $12.09
- Distributor Wiring Harness (17350080) – $30.49
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $42.49
- Thermocap Radiator Cap (10648825) – $48.09
- Contact Set Hp 32 Oz (17370025) – $48.49
What types of Performance and Racing Products do you sell for my 1957 Ford Club?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1957 Ford Club:
Can I get help with 1957 Ford Club Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Club Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Club Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
